Samsung BT07PS User Manual

BT07PS

|

T

Safety Symbols

|

Power | Installation

Safety Symbols

Make sure to follow the directions below to prevent accidents and damage to the product.

Failure to follow the accompanying directions may lead to serious injury or death.

Failure to follow the accompanying directions may lead to minor personal injury or property damage.

|

Using and

Cleaning

|

|

Safety Symbols

|

Power | Installation

Power

he images here are for reference only, and are not applicable in all cases (or countries).

Insert the power plug correctly until it is firmly in place.

z Failing to do so, may cause fire.

Do not use a damaged power plug, cord or outlet, as this may cause electric shock

or fire.

Do not touch the power plug with wet hands, as this may cause electric shock.

|

Using and

Cleaning

|

Do not connect more than one appliance to a single outlet, as an overheated outlet

may cause fire.

Do not use force to pull the power cord. Don't place anything heavy on the power

cord, as this may cause electric shock or fire.

Make sure to turn the power off and disconnect the power plug from the outlet

before moving the product. Make sure to disconnect the connection cables from

other devices as well.

z Moving the product without disconnecting the power cord may damage it while

moving, and may cause electric shock or fire.

Hold and pull out the plug by its body when disconnecting it from the outlet, as

pulling the plug out by the cord may cause it to be damaged.

z Failing to do so, may cause fire, or the product may not turn on normally.

Ensure that the power plug is disconnected before cleaning the product.

z Failing to do so, may cause electric shock or fire.

Keep the product away from places exposed to oil, smoke or moisture; do not

install inside a vehicle.

z This may cause a malfunction, electric shock or fire.
z In particular, avoid operating the monitor near water or outdoors where it could be

exposed to snow or rain.

Do not install the product near any heating appliance.

z There is a risk of fire.

Installation

|

Safety Symbols

When installing the product on a cabinet or shelf, do not let the front end of the

product project beyond its front edge.

Do not place the power cord near a heater, as the power cord may melt, causing

electric shock or fire.

Do not install the product in a car or a location exposed to oil, smoke, moisture,
water, or rainwater.

|

Power | Installation

z Failing to do so, may cause the product to fall, resulting in a product malfunction or

|

Using and

Cleaning

personal injury.

z Any contact of these materials with the product may cause electric shock or fire.

|

Disconnect the power plug when there is thunder or lightning.

z Failing to do so, may cause electric shock or fire.

Place the product down gently when installing it.

z Failing to do so may cause product damage or personal injury.

Avoid dropping the product when moving, as this may cause product damage or

personal injury.

Do not install the product in a location easily reached by children.

z As the product may fall and cause personal injury.

|

Safety Symbols

|

Power | Installation

Using and Cleaning

Do not insert any metal objects such as forks, wire, or gimlets, or flammable items

such as paper or matches into the ports at the back of the product, as this may
cause electric shock or fire.

z

If water or any foreign substance enters the product, make sure to turn the product
off disconnect the power plug from the outlet, and contact a service center.

Never disassemble, repair, or modify the product yourself.

z If you need to repair your product, contact a service center. An attempt at repairing

this product may cause electric shock or fire.

If you hear a strange sound, smell anything burning, or see smoke, disconnect the
power plug immediately and contact a service center.

|

Using and

Cleaning

|

z Failing to disconnect the power plug may cause electric shock or fire.

Always remove dust and water from the pins and connections of the power plug.

z Failing to do so may cause electric shock or fire.

When cleaning the product, first disconnect the power plug and clean it with a soft,
dry cloth.

z Do not use any chemicals such as benzene, alcohol, thinners, mosquito repellant,

aromatic, lubricant, detergent or wax.

When not using the product for a long time, make sure to disconnect the power plug.

z Heavy accumulated dust may cause electric shock or fire.

If the product needs to be installed in a location that doesn't satisfy general

conditions, make sure to contact one of our service engineers about the installation

as the product may encounter serious quality problems due to its environment.

z This refers to locations exposed to conditions such as heavy fine dust, chemicals, high or

low temperature, moisture, or when the product needs to be used continually without a
break over a long time.

If the product has been dropped or the product casing is damaged, turn it off and

disconnect the power plug.

z Using the product without verifying that it has not been damaged may cause electric

shock or fire. Please contact a service center.

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment) - Europe only

(Applicable in the European Union and other European countries with separate
collection systems)

This marking shown on the product or its literature, indicates that it should not be disposed
with other household waste at the end of its working life. To prevent possible harm to the
environment or damage to health from uncontrolled waste disposal, please separate this from
other types of waste and recycle it responsibly to promote the sustainable reuse of material
resources.

Household users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for
environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial wastes for
disposal.

|

A

Features| Components

|

Front

Features

Expand the memory capacity with a memory card. Enjoy stored images immediately.

By connecting a SD or MMC/MS/XD memory card of your digital camera to your digital photo frame, you can enjoy
images quickly and easily. This also provides a way to expand the memory capacity of the frame.

Stylish design

With its sleek and clean, high class design, your digital photo frame doubles as an ornament for your desk or table.

90 degree rotating stand allows both horizontal and vertical installation.

|

Back

Side

|

(Buttons)

|

|

Features| Components

Please check that all components are contained in the delivered package.
If anything is omitted, contact the local distributor where the product was purchased. For optional items, contact a service center.
Never use a power adapter other than the adapter provided with the product.

|

Front

|

Back

Side

|

(Buttons)

Components

|

Digital Photo Frame

Manual

(Colors may differ for each product.)

Warranty

USB cable
(A-B type)

User Manual

Power Adapter

|

Front

|

Back

Side

|

(Buttons)

|

Cables

Quick Start

Power cord

(Not available in all locations)

|

Features| Components

Front

Back

|

Features| Components

|

Front

|

Back

Side

|

(Buttons)

|

T

A

A

Y

Kensington lock

USB connection

port

Headphone

connection jack

DC –In Jack

Stand

Memory Card Slot

he Kensington lock is a device used to physically secure the system when using it in a

public place. (The locking device has to be purchased separately.)

For using a locking device, please contact where you purchased it.

Connect a PC or an external device using a USB cable.

Down stream Connect your digital photo frame to a USB-supporting storage

device with a USB cable.

Up stream Connect your digital photo frame to a PC's USB port with a

USB cable.

Make sure to use the USB cable (A-B type) provided with the product when
connecting your digital photo frame to a PC through the upstream port.

Connect your headphones to the Headphone connection jack.

Connect the power adapter to this jack.
Connect the power cord to the power jack of the power adapter.

45, 90 degree rotating stand allows both horizontal and vertical installations. If your
digital photo frame is installed vertically, you can rotate your photos using the rotation
function to fit to the vertical installation.

llows you to insert an optional memory card.
(Only applicable for SD/MMC/MS/XD card)

Sliding Prevention

Holder

Speaker

Supports the product so that it stays firmly in place on slippery surfaces.

ou can listen to music files and movies.

|

Features| Components

|

Front

|

Back

Side

|

(Buttons)

|

Side (Buttons)

T

Adj

Adj

[] Power Button

Power Indicator Shows the power status. When the product is powered on, the power light turns

[MENU] Menu Button Displays the menu window at the bottom left corner of the screen.

[VOL +] Volume Button

[] Up Button

[] Left Button

[ ] Right Button

[VOL +] Volume Button

[ ] Down Button

[ENTER( )] Enter Button

[ ▶ll ] Play / Pause

Button

[BACK] Back Button Return to the previous menu.

urns the product on or off.

Hold down the power button at the right of the product for about 2 seconds.

on.

usts the sound volume when playing music files or movies.

Used for moving up.

Used for moving left.

Used for moving right.

usts the sound volume when playing music files or movies.

Used for moving down.

Used for selection.

Play / Pause during playback.

Connecting the Power

|

Power

|

USB

|

Memory Card

|

Connect the power adapter to the terminal at the back of the product.

Connect the power cord to the power adapter.

Plug the power cord for the product into a nearby outlet.

Press the button on the side of the product to turn the product on.

Connecting via USB

|

Power

|

USB

|

Memory Card

|

T

T

Down Stream

Port

Up Stream Port Used to connect your digital photo frame to a PC.

Used to connect an external USB-supporting device to your digital photo frame.

his product does not support USB card readers. Only USB storage is supported.

he external devices connected to your Digital Photo Frame are not recognized by your PC.

When connecting an external device to the down stream port, use the USB cable provided with the
external device.
Samsung carries no liability for external device malfunctions caused by using any cable except the
standard cables specified for each device.
Some external products provide a cable that does not meet USB standards. Hence, they may cause a
malfunction.
If an external storage device does not work normally when connected to your digital photo frame, try
to connect it to your PC. If it still does not work normally when connected to your PC, contact a
service center for that external device or your PC.

When connecting your digital photo frame to a PC through the up stream terminal, make sure to use
the USB cable provided with the product.

Connect to the upstream jack of your digital photo frame.

Connect the USB terminal of your PC.

Folder Structure

When connecting this product to your PC, it is displayed as a removable disk (E:), as shown in the figure below.
You can save and play all music and movie files in the following folders.
You can also add and delete folders as required. (However, if you delete the following default folders, they are automatically
created when your product is turned on again.)

images

A default folder created by the product
(The full path displayed in the Digital Photo Frame: Photos /
frame memory / images)

T

T

Favorites Mainly stores photos.

Recent

imagecashe Stores as many Web Photos (photos from the Windows Live or

he capacity of this product is 64 MB.
If the capacity is exceeded, no further files can be stored.
Do not turn off the product while saving, playing, or deleting a file.

he volume name of the removable disk (for example, E:, F:, G:) may differ
depending on your computer environment.

Temporarily stores the last displayed photo.

RSS) to the cache as were used in the images folder.
If you copy your photos from your PC to the imagecashe, they
are invisible and cannot be viewed with your Digital Photo
Frame.

|

Power

Connecting a Memory Card

SD/MMC/MS/XD CARD Slide the card in the direction marked on the top of the card.

|

USB

|

Memory Card

|

Removing the memory card while playing MP3s, movies, or photos, may
cause the product to operate abnormally. In this case, turn the product off
and on.

|

Buttons

Buttons

Control Buttons

Button Description

|

Buttons

MENU Opens the on-screen menu and exits from the menu.

VOL +, VOL - Push the button to adjust volume.

∧,∨,＜,＞

ENTER Activates a highlighted menu item.

BACK Use this button to step one step back in the menu.

Photos / Web photos

List Menu (Only Photos)

|

Photos, Web Photos

|

Photos, Web Photos

Turns the product on or off.
Hold down the power button on the side of the product for about 2 seconds.

These buttons allow you to adjust items in the menu.

|

Music

|

Music

|

Video

|

Video

|

|

Settings

Settings

|

|

When pressing the MENU button, the on-screen menu is displayed on the screen.

Sub OSD

Description

Upper OSD

Show Pictures From

Memory Card, USB, Frame Memory(:default value)

Select a connected storage media.
You can only select an external device which is currently connected.

Thumbnail List Menu

When pressing the MENU button, the on-screen menu is displayed on the screen.

Sub OSD

Description

Description

Show Related Photos

Slideshow Menu

Pause Slide Show/

Resume Slide Show

Slide Show Settings

Show Related Photos

Upper OSD

Start Slide Show Start Slide Show

Copy

Delete

Set as Background

Background Music

Upper OSD

Brightness

Rotate

Copy File, Copy All Files

You can copy the selected file to other connected storage devices.

Yes, No

Delete the file. (This is enabled when Photos is selected.)

Allows you to view a list of other photos which have a relationship to the selected image, for example,
other photos with a similar date to it.

-. You can only use images shared by Windows Media Player on your PC while your digital photo frame
is connected to it.

Sets the currently selected image as the Home Background for the main screen.
At this time, the Home Background in the Settings menu is automatically set to Custom.

On, Off, Setting

Set the Background Music to On by pressing the Menu button. Then set the Background Music to
Setting by pressing the Menu button again and selecting the music you want from among the music
files saved on the Frame Memory or the connected external memory.

Sub OSD Detail OSD

Pause Slide Show/Resume Slide Show

Transition Fade, Wipe, Slide, Blind, Checker, Random, None

Select an effect for your slide show when transitioning between images.

Interval 5 Seconds, 10 Seconds, 20 Seconds

Controls the time intervals between image files for a slide show.

Repeat On, Off

Select the Repeat for displaying images.

Shuffle On, Off

Select whether to playback the files sequentially or in shuffle mode.

Allows you to view a list of other photos which have a relationship to the selected image, for example,
other photos with a similar date to it.

-. You can only use images shared by Windows Media Player on your PC while your digital photo frame is
connected to it.

0~100

Adjust the brightness from 0 to 100.

Original, 90°, 180°, 270°

You can rotate an image 90°, 180°, or 270°. You can also keep the image as is by selecting Original.

Rate Photos

Photo Aspect

Set as Background Sets the image being displayed in the slide show as the Home Background for the main screen.

Background Music

Direct Functions (Slide Show)

Button Description

> Play the next file in the list.

< Play the previous file in the list.

▶ ll Pressing the ▶ ll button alternately plays and pauses the file.

MENU Opens the on-screen menu and exits from the menu.

While a slide show is in progress, stars (★) are displayed according to the grade set by Windows Media

Player.

-. You can only use images shared by Windows Media Player on your PC while your digital photo frame is
connected to it.

Original, Auto Fit, Fit To Width, Fit To Screen

Select an aspect ratio for images to display.

On, Off, Setting

You can specify the background music for your slide shows.
Select On and move to Settings. Then select the music you want to play.
You can adjust the volume using the ∧∨ buttons to the right of your digital photo frame.

|

Buttons

|

Photos, Web Photos

|

Music

|

Music

List Menu

When pressing the MENU button, the on-screen menu is displayed on the screen.

Sub OSD

Description

Upper OSD

Music Source

Playback Mode

Copy

Memory Card, USB, Frame Memory(:default value)

Select a connected media storage device.
You can only select an external device which is currently connected.

Once, Repeat, Repeat Once, Shuffle

Select to playback music files either Once, repeatedly or randomly.

Copy File, Copy All Files

Video

|

Settings

|

You can copy the selected file to other connected storage devices.

V

Delete Delete the file.

Play Menu

When pressing the MENU button, the on-screen menu is displayed on the screen.

Direct Functions

Upper OSD

Playback Mode

Brightness

＞

＜

∧,∨

▶ll

MENU

Once, Repeat, Repeat Once, Shuffle

Select to playback music files either Once, repeatedly or randomly.

0~100

Adjust the brightness from 0 to 100.

Plays the next file.

Plays the previous.

Adjusts the volume.

Plays and Pauses a file.

Displays the menu.
Exits the menu.

Description

Sub OSD

|

Buttons

|

Photos, Web Photos

|

Music

|

ideo

List Menu

When pressing the MENU button, the on-screen menu is displayed on the screen.

Upper OSD

Video Source

Memory Card, USB, Frame Memory(:default value)

Select a connected media storage device. You can only select an external device which is currently

Sub OSD

Description

Video

|

Settings

|

connected.

Playback Mode

Copy

Delete Delete the file.

Play Menu

When pressing the MENU button, the on-screen menu is displayed on the screen.

Upper OSD

Playback Mode

Brightness

Direct Functions

＞

＜

∧,∨

▶ll

MENU

Play the next file.

Play the previous.

Adjust volume.

Plays and Pauses a file.

Displays the menu.
Exits the menu.

Once, Continuous

You can playback movie files either Once or Continuously.

Copy File, Copy All Files

You can copy the selected file to other connected storage devices.

Sub OSD

Description

Once, Continuous

Select a mode among Once, Continuous.

0~100

Adjust the brightness from 0 to 100.

|

Buttons

Settings

Set the Settings

|

Photos, Web Photos

|

Music

|

Video

|

Settings

|

Upper OSD

g

Default Computer

Language

Time Zone You can select the Time Zone that you are in. Select a Time Zone.

Daylight Saving Time

Date and Time

Alarm

Auto Picture On/Off

By using the wireless LAN connection search function, you can reset the current connection and re­select the computer from which you are receiving photos.

English, Deutsch, Español, Français, Italiano, Português, Русский, Türkçe, 简体中文, 繁體中文,

한국어

Select a language to use for your product.

On, Off

Selects whether to apply DST (Daylight Saving Time) depending on the Time Zone and Summer
Time.

Month, Day, Year, Hour, Minute, am/pm

Enter and set Month, Day, Year, Hour, Minute or am/pm. Whenever the power plug is disconnected,
the Date and Time information is lost. Therefore, you need to reset them each time

Activation, Hour, Minute, am/pm, Repeat, Sound, Volume

You can set alarms.

Activation, Hour, Minute, am/pm

Your product will turn on at the specified time automatically.
Your product will turn off at the specified time automatically.
If the screen was turned off at the Off Time, it turns on a
pressed.

When your Photo Frame is connected to your PC as a Mass-Storage device using a Mini-Monitor
or USB cable, the screen will not be turned off even at the Off Time.

Sub OSD

Description

ain when a key other than the Power key is

OSD Color Theme

Home Background

Time Format

Starting Mode

Internet Time Update

Timeout

Button Sound

Brightness

Wireless Network (SSID) Displays a list of available SSIDs when an access point exists in your vicinity.

Wireless Network Code Displays the password required if the access point has a security setting.

Managment Web Address Displays the webpage address to connect to Samsung Photo Frame Web Configuration.

Managment Password

Proxy Server

Proxy Required

Violet Style, Blue Style, Green Style, Orange Style

You can select a color theme for the OSD background.

Default, Custom

You can reset the Home Background of the main menu to the default image.

12 hours, 24 hours

You can select whether to display the time in the 12 or 24 hour mode.
In 24 hours, am and pm will not be displayed.

Home Menu, Last Mode

You can select the menu which is displayed when your Digital Photo Frame starts.

Auto, Manual, Update Time Now

Select whether to set the time information which is received through the Internet as the system time
for your Digital Photo Frame.

1 Minute, 3 Minutes, 5 Minutes

Select the time for the screensaver to start.
However, if no button is operated for one minute, the screensaver starts, regardless of the Timeout
Settings on the Main menu.

On, Off

You can turn the sound of the operation buttons on or off.

0~100

Adjust the brightness from 0 to 100.

Displays the password required to connect to Samsung Photo Frame Web Configuration.
Enables case-sensitive mode.

Displays the address of the currently configured proxy server.
You can change it under the Settings section of the Samsung Photo Frame Web Configuration.

Yes, No

Firmware Update

Product Information

Management Web

Upper Menu

Photo Frame

Web Photos

You can specify whether to use a proxy server.

Update the product using external memory(SD/MMC/MS/XD,USB).
Please visit www.samsung.com for the latest firmware update.

Reset Settings

Go to [Settings]-[Management Web Address] in your Photo Frame and then open this URL using Internet Explorer on your
PC.

When connected, the Welcome page will be displayed. Enter the Password which you can see in the [Settings]­[Management Password] of your Photo Frame in the [Password] box on the Welcome page, and click the [sign in] button.

Welcome

Storage

Settings

Help Displays the help section for using Samsung Photo Frame Web Configuration.

Yes, No

Reverts the product Settings to factory defaults.

Model, Firmware Version, Copyright

View the product information.

Sub Menu

Description

Password

Enter the password displayed in Management Password.
Enables case-sensitive mode.

Now Playing

You can monitor the photos which are being displayed in the slide show at the same time.

Photo Feeds, Photos Windows Live Spaces

You can add or remove a website address from which you can receive photos.

Photo Feeds, Photos Windows Live Spaces

You can check the size of the photos in the addresses listed in Web Photos.

Basic, Administrator Password, Date and Time, Network Settings

You can enter and change the product name, administrator password, time, and network proxy server,
etc.

Initial Settings

T

Installation Program Guide and User Recommendations
Settings for Sharing Photos on your PC - Configuring Your Windows
Settings for Sharing Photos on your PC - Configuring Your Photo Frame
Viewing the Photos from Windows Live Space
Viewing the Photos via RSS
Setting up Rating and Tags (VISTA:Tags, XP:Labels) on a PC
I want to update firmware.

Initial Settings

o use the wireless sharing function provided with this product, Windows Vista must be running on your computer and a wireless
LAN access point (AP) must be in your vicinity. (For Windows XP users, Windows Media Player 11 is required and must be installed
on your PC.)

1. Choose Your Language

Turn on your Digital Photo Frame and select a language. The selected
language is used as the OSD language and for the “Samsung Photo
Frame Web Confi guration” which is embedded in your Digital Photo
Frame. You can change the language via Settings -> Language.

2. Choose Your WiFi Network

3. Choose Computer

A list of APs is displayed. (If there are no APs displayed, click “Refresh
Networks” to update the list.)
Select an AP to connect to and the connection state is displayed in a
popup window and the “Choose Computer” screen will appear.

A list of PCs is displayed. (If there are no PCs displayed, click “Refresh
List” to update the list.) Select a PC to connect to and the Main screen
will appear.

Y

T

Ensure that the settings are confi gured as shown below.
Otherwise, your PC may not be displayed in the list or you may not be able to connect to it.
In Vista, select Control Panel > Network and Sharing Center > Customize. Check whether the Location type is set to Private. Select
Digital Photo Frame from the Windows Media Player > Library > Media Sharing list. Check whether it is set to Allow.

Installation Program Guide and User Recommendations

Windows XP

We highly recommend installing .Net Framework 3.0.

Click on the "Frame Manager" icon in the Manual - Main screen to run the installation file.

Installing Frame Manager

Windows Media Player 11 or later must be installed.

Digital Image Library Starter Edition (DISE)

: This program allows you to change the ratings for the photos on your Digital Photo Frame via
your PC.

Recommendations when using the Digital Photo Frame: Internet Explorer 7.0 or higher

Windows Vista

Frame Manager

Frame Manager is a program needed to use Samsung Photo Frame Web Configuration.

ou can find the installed Frame Manager in C:/Program Files/Samsung/Frame Manager.
o run Frame Manager, click Start and point to Programs, and then click Frame Manager > Frame Manager.

Click on the "Frame Manager" icon in the Manual - Main screen to run the installation file.

Installing Frame Manager

Settings for Sharing the Photos on your PC - Configuring Your Windows Vista

Adding Photos to the Library

Run Windows Media Player.

Click the [Library] tab at the top.

Click [Add To Library] in the [Library] tab.

g

In the [Add To Library] window, select [My

personal folders] under the [Select the folders to
monitor] section and select the folder containing
photos and click [Add].

Select the folder to share and click [OK] to add
it.

Checking Shared Photos

When you click [OK], the [Add To Library]

window is closed and the [Add to Library by
Searching Computer] is displayed. Wait until it
finishes the operation and click [Close] when it is
completed.

In the Windows Media Player, set the Category,

which is under the [ , ] symbol at the top left,
to [Picture].

In the [Library], select Recently added, All

Pictures, Keywords, Date Taken, Ratin
settings and check whether the added photos
exist in the library.

, or Folder

Sharing Settings for Accepting Connections from Your Photo Frame

In the [Library] tab, click on [Media Sharing].

In the [Media Sharing] window, check the [Share

my media] checkbox under [Sharing settings].

If no [Available device] is displayed in the [Media

Sharing] window, proceed to steps 4. If
displayed, proceed to step 5.

In the [Media Sharing] window, click

[Networking] and check whether the current
network is set to [Private network]. If not, set it
to [Private Network].

If your network is a Private network, the

[Available Device] list and the [Settings] button
are displayed in the [Media Sharing] window.

In the [Media Sharing] window, click [Settings].

The [Media Sharing-Default Settings] window is
displayed.

In the [Media Sharing-Default Settings] window,

set the [Media Type] to [Picture], both [Star
ratings] and [Parental ratings] to [All ratings] or
a required rating under the [Default Settings]
section. If you want to add a device or computer
which tries to connect to the library to the list
automatically, check the [Add new devices and
computers automatically] checkbox.

Only photos can be transmitted via PC sharing.

Settings for Sharing the Photos on Your PC - Configuring Your Photo Frame

Checking Network Connections

Check whether the Network icon is displayed at the

left top of the Main screen.

If the Network icon is displayed, proceed to the

Checking Computer Connections section
described below. If it is not displayed, move to
[Settings]-[Wireless Network(SSID)].

SSID : Service Set Identifier

In the [Wireless Network(SSID)] window, select the

SSID to which you want to connect your Digital Photo
Frame to. If no available SSID is displayed, click
[Refresh Networks] to update the list.

If you select this when the SSID is encrypted, a
password input window is displayed. You can only be
connected to the network if you enter the correct
password.

If the "Connected" message is displayed, it means
that your Digital Photo Frame is connected to the
network.