Samsung BN68-01976J-00, BN-01J-00 User Manual

Quick Setup Guide

2 3 41 5

789

STOP

Please do not return

this unit

If you are having problems operating

1-800-SAMSUNG (1-800-726-7864)

1-800-SAMSUNG (7267864)

Samsung Electronics America, Inc.

105 Challenger Road Ridgefield Park, NJ 07660-0511

Samsung Electronics Canada Inc., Customer Service

55 Standish Court Mississauga, Ontario L5R 4B2

Call center hours of operation (Mon-Sun 9AM-12AM EST).

To register this product please visit www.samsung.com/register.

Rear Panel

this TV,

Please call;

For web support please visit

www.samsung.com/support

LN22B350

1 PC/DVI AUDIO IN 2 ANT IN 3 SERVICE 4 HDMI (DVI) IN

5 DIGITAL AUDIO OUT (OPTICAL) 6 POWER INPUT 7 H (HEADPHONE) 8 PC IN

Video Input Performance Comparison

HDMI/DVI

PC/COMPONENT

VIDEO

Best

Better

Normal

9 COMPONENT IN / AV IN 0 KENSINGTON LOCK

Audio Output Performance Comparison

OPTICAL (Digital)

AUDIO (Analog)

English-1

Best

Normal

$ % ^ &

(

) a

3 4

Remote Control

See “Remote Control” in the owner’s instructions for details.

POWER

Turns the TV on and off.

NUMERIC BUTTONS

Press to change the channel.

3 _

Press to select additional channels (digital and analog) being broadcast by the same station. For example, to select channel ‘54-3’, press ‘54’, then press ‘_’ and ‘3’.

MUTE M

Press to temporarily cut off the sound.

- VOL +

Press to increase or decrease the volume.

CH LIST

Used to display Channel Lists on the screen.

TOOLS

Use to quickly select frequently used functions.

INFO

Press to display information on the TV screen.

COLOR BUTTONS

Use these buttons in the Channel list menus etc.

P.SIZE

Picture size selection.

Selects the TV mode directly.

PRE.CH

Tunes to the previous channel.

# z

Press to change channels.

SOURCE

Press to display and select the available video sources.

FAV.CH

Used to display Favorites Channel Lists on the screen.

Displays the main on-screen menu.

RETURN

Returns to the previous menu.

 UP▲/DOWN▼/ LEFT◄/

RIGHT►/ENTERE

Use to select on-screen menu items and change menu values.

(

EXIT

Press to exit the menu.

)

Controls the caption decoder.

MTS

Press to choose stereo, mono or Separate Audio Program (SAP broadcast).

English-2

Connections

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via HDMI

Connect an HDMI Cable between the HDMI (DVI) IN jack on the TV

TV Rear Panel

and the HDMI jack on the DVD / Blu-ray player or Cable Box / Satellite receiver (Set-Top Box).

DVD / Blu-ray player / Cable Box /

Satellite receiver (Set-Top Box)

HDMI Cable (Not supplied)

Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.

➣

The TV may not output sound and pictures may be displayed with abnormal color when DVD / Blu-ray player / Cable Box / Satellite receiver

➣

(Set-Top Box) supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI (DVI) IN jack and the audio cables to the PC/DVI AUDIO IN jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) to confirm the HDMI version, then request an upgrade.

HDMI cables that are not 1.3 may cause annoying flicker or no screen display.

➣

What is HDMI?

•

HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video

signals using a single cable.

•

The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed.

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via DVI

TV Rear Panel

Connect a DVI to HDMI Cable or DVI-HDMI Adapter between the

HDMI (DVI) IN jack on the TV and the DVI jack on the DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).

Connect Audio Cables between the PC/DVI AUDIO IN jack on the TV and

the DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).

DVD / Blu-ray player / Cable Box /

Satellite receiver (Set-Top Box)

Audio Cable (Not supplied)

DVI to HDMI Cable (Not supplied)

Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.

➣

When connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box), match the color of the connection terminal to the cable.

➣

When using an HDMI / DVI cable connection, you must use the HDMI (DVI) IN jack.

➣

English-3

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via Component cables

Connect a Component Cable between the COMPONENT IN [ Y, PB, PR ] jacks

TV Rear Panel

on the TV and the COMPONENT [ Y, PB, PR ] jacks on the DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).

Component Cable

(Not supplied)

Audio Cable (Not supplied)

Connecting a VCR

TV Rear Panel

Audio Cable (Not supplied)

Video Cable (Not supplied)

DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box)

VCR Rear Panel

Connect Audio Cables between the COMPONENT IN [R-AUDIO-L] jacks

on the TV and the AUDIO OUT jacks on the DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).

Component video separates the video into

➣

Y (Luminance (brightness)), Pb (Blue) and Pr (Red) for enhanced video quality. Be sure to match the component video and audio connections. For example, if connecting a Component video cable to COMPONENT IN, connect the audio cable to COMPONENT IN also.

Each DVD / Blu-ray player / Cable Box /

➣

Satellite receiver (Set-Top Box) has a different back panel configuration.

When connecting a DVD / Blu-ray player /

➣

Cable Box / Satellite receiver (Set-Top Box), match the color of the connection terminal to the cable.

Connect a Video Cable between the AV IN [VIDEO]

jack on the TV and the VIDEO OUT jack on the VCR.

Connect Audio Cables between the COMPONENT IN

[R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the VCR.

If you have a ‘mono’ (non-stereo) VCR,

➣

use a Y-connector (not supplied) to connect to the right and left audio input jacks of the TV. Alternatively, connect the cable to the ‘R’ jack. If your VCR is stereo, you must connect two cables.

Each VCR has a different back

➣

panel configuration. When connecting a VCR, match

➣

the color of the connection terminal to the cable.

English-4

Connecting a Digital Audio System

TV Rear Panel

Digital Audio System

Optical Cable

(Not supplied)

When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV and

➣

adjust the volume level with the system’s volume control.

5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.

➣

Each Digital Audio System has a different back panel configuration.

➣

When the Home Theater receiver is set to On,, you can hear sound output from the TV’s Optical jack. When the TV is displaying

➣

a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component such as a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver. If you want to hear 5.1 channel audio, connect the digital audio out jack on DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) directly to an Amplifier or Home Theater, not the TV.

Connect an Optical Cable between the DIGITAL AUDIO

OUT (OPTICAL) jacks on the TV and the Digital Audio Input jacks on the Digital Audio System.

English-5

Connecting a Camcorder

Using a Video Cable

TV Rear Panel

Connect a Video Cable between the COMPONENT IN / AV IN [VIDEO]

jack on the TV and the VIDEO OUT jack on the camcorder.

Connect Audio Cables between the COMPONENT IN / AV IN [R-AUDIO-

L] jacks on the TV and the AUDIO OUT jacks on the camcorder.

Camcorder

Each Camcorder has a different back panel configuration.

➣

When connecting a Camcorder, match the color of the connection terminal to the cable.

➣

Audio Cable (Not supplied)

Video Cable (Not supplied)

Using an HDMI Cable

TV Rear Panel

HD Camcorder

HDMI Cable (Not supplied)

Connect an HDMI Cable between the HDMI (DVI) IN jack on the TV

and the HDMI OUT jack on the camcorder.

English-6

Connecting a PC

Using a D-Sub Cable

TV Rear Panel

D-Sub Cable (Not supplied)

PC Audio Cable

(Not supplied)

Using a D-Sub Cable

Connect a D-Sub Cable between PC IN connector on the TV and

the PC output connector on your computer.

Connect a PC Audio Cable between the PC/DVI AUDIO IN jack on the

TV and the Audio Out jack of the sound card on your computer.

When connecting a PC, match the

➣

color of the connection terminal to the cable.

Using an HDMI/DVI Cable

TV Rear Panel

Using an HDMI Cable

TV Rear Panel

HDMI/DVI Cable (Not supplied)

3.5 mm Stereo mini-plug/

2RCA Cable (Not supplied)

Using an HDMI/DVI Cable

Connect an HDMI/DVI cable between the HDMI (DVI) IN jack on

the TV and the PC output jack on your computer.

Connect a 3.5 mm Stereo miniplug / 2RCA Cable between the PC/DVI

AUDIO IN jack on the TV and the Audio Out jack of the sound card on your computer.

When using an HDMI/DVI cable connection,

➣

you must use the HDMI (DVI) IN terminal.

Using an HDMI Cable

Connect an HDMI cable between the HDMI (DVI) IN jack on the TV and

the PC output jack on your computer.

Each PC has a different back panel

➣

configuration.

HDMI/DVI Cable (Not supplied)

English-7

Turning the TV On and Off

Press the POWER button on the remote control. You can also use the POWER button on the TV.

Viewing the Menus

With the power on, press the MENU button. The main menu appears on the screen.

The menu’s left side has icons: Picture, Sound, Channel, Setup, Input, Support.

Press the ▲ or ▼ button to select one of the icons. Then press the ENTERE button to access the

icon’s sub-menu. Press the EXIT button to exit.

The on-screen menus disappear from the

➣

screen after about one minute.

Storing Channels in Memory (Automatic Method)

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select “Channel”, then

press the ENTERE button.

When selecting the Cable TV system: Press the

ENTERE button to start the auto program.

Press the ▲,▼, ◄ or ► to select the correct analog

signal cable system source among “STD”, “HRC”,

and “IRC”. Press the ▲ or ▼ button to select “Start”,

then press the ENTERE button. If you have Digital cable TV, select the cable system signal source for both Analog and Digital.

Auto Program

Selects the cable system.

Analog

Digital

The TV begins memorizing all available stations. Press the EXIT button to exit.

Auto Program in Progress.

DTV Cable : 12 Cable : 32

Removing scrambled channel.

DTV Cable : 16 Cable : 45

➣

STD

After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then reappears.

HRC IRC

HRC IRCSTD

Start

U Move E Enter m Skip

Auto Program

Stop

E Enter m Skip

Auto Program

DTV Cable 41

Stop

E Enter m Skip

Cable 38 50%

77%

Press the ▲ or ▼ button to select “Auto Program”,

then press the ENTERE button.

Press the ▲ or ▼ button to select the antenna connection, then press the ENTERE button.

Auto Program

Select the Antenna source to memorize.

Air Cable Auto

U Move E Enter m Skip

Start

English-8

To Stop the Auto Program Function

Press the MENU button while the Auto Program function is being executed. You can also press the ENTERE button to stop the setup.

Checking to see if Channels were Stored in Memory

Press the CH button. Only the channels stored in memory will be selected (in order).

Selecting the antennas

• Air: “Air” antenna signal.

• Cable: “Cable” antenna signal.

• Auto: “Air” and “Cable” antenna signals.

+ 18 hidden pages