Samsung BHS6000 User Manual
Headset
HS6000
English ...............................................................................................1
Română ...........................................................................................35
Български ......................................................................................71
Srpski ............................................................................................ 108
Hrvatski ........................................................................................ 143
English
Contents
Getting started
Your headset overview .......................................................................................................................................4
Button functions ................................................................................................................................................... 5
Charging the headset ......................................................................................................................................... 6
Wearing the headset ........................................................................................................................................... 8
Using your headset
Turning the headset on or off .......................................................................................................................10
Using voice prompts .........................................................................................................................................10
Using the voice command ..............................................................................................................................13
Pairing and connecting the headset ..........................................................................................................16
Pairing via the Active pairing feature .........................................................................................................20
Using call functions ...........................................................................................................................................21
Using music control functions .....................................................................................................................25
Using it as the music headset ........................................................................................................................26
Resetting the headset.......................................................................................................................................27
Appendix
Frequently asked questions ...........................................................................................................................28
Warranty and parts replacement .................................................................................................................30
Specifications .......................................................................................................................................................31
Correct disposal of this product ...................................................................................................................32
Correct disposal of batteries in this product ...........................................................................................33
English
1
Please read this manual before operating your headset, and keep it for future reference.
Graphics used in this manual are for illustration purposes. The actual products may vary.
Copyright
Copyright © 2011 Samsung Electronics
This user manual is protected under international copyright laws.
No part of this user manual may be reproduced, distributed, translated, or transmitted in
any form or by any means, electronic or mechanical, including photocopying, recording,
or storing in any information storage and retrieval system, without the prior written
permission of Samsung Electronics.
Trademarks
SAMSUNG, and the SAMSUNG logo are registered trademarks of Samsung Electronics.•
®
is a registered trademark of the Bluetooth SIG, Inc. worldwide. More
Bluetooth•
information about Bluetooth is available at www.bluetooth.com.
All other trademarks and copyrights are the property of their respective owners.•
2
Safety information
To prevent injury to yourself and others or damage to your device, read the safety
information about your device before using the device.
Comply with all safety warnings and regulations regarding mobile device usage while operating •
a vehicle.
Do not disassemble, modify, or repair your device. Any changes or modifications to your device •
can void your manufacturer’s warranty. If your device needs servicing, take your device to a
Samsung Service Centre.
Do not bite or suck the device. Children or animals can choke on small parts.•
Do not store your device in very hot or very cold areas. It is recommended to use your device at •
temperatures from 5 °C to 35 °C. Extreme temperatures can damage the device and reduce the
charging capacity and life of your device and battery.
Do not use your device while it is charging or touch your device with wet hands.•
Keep your device dry. Humidity and liquids may damage the parts or electronic circuits in your •
device. Water damage to your device can void your manufacturer’s warranty.
Do not use your device outdoor during a thunderstorm. Doing so may result in electric shock or •
device malfunction.
English
3
Getting started
Your headset overview
Earpiece
Indicator light
Voice command
button
Line in jack
Talk button
Microphone
Make sure you have the following items: travel adapter, headset, •
line out cable, pouch and user manual.
The supplied items may alter depending on your region.•
4
Control switch
Volume button
Power switch
Charging socket
Button functions
Button Function
Power
Switch
Talk
Volume
Voice
command
Slide up or down to turn the headset on or off.•
Press and hold for 3 seconds to enter Pairing mode.•
Press to make or answer a call.•
Press to end a call.•
Press to adjust the volume.•
Press and hold to turn the microphone on or off during •
a call.
Press and hold both Volume buttons simultaneously to turn •
the indicator light on or off.
Press to activate the Voice command. •
While listening to music, press to change the SoundAlive •
mode.
Press or slide to control the music files. •
English
5
Charging the headset
This headset has a rechargeable internal battery which is non-removable. Make sure the
headset is fully charged before using it for the first time. To check the battery level, see
page 7.
1 Connect the charger to the charging
socket on the headset.
2 Plug the charger in to the wall outlet.
During charging, the indicator light will
turn red. If charging does not begin,
unplug the travel adapter and plug it in
again.
3 When the headset is fully charged, the red
indicator light changes to blue. Unplug
the travel adapter from the wall outlet and
the headset.
Use only Samsung-approved chargers. Unauthorised or Non-Samsung chargers •
could cause damage to the headset or in extreme circumstances an explosion,
it could also invalidate any warranty on the product.
6
Repeatedly charging and discharging of the headset, over time will cause the •
battery performance to diminish. This is normal for all rechargeable batteries.
Never make or receive calls while charging, always disconnect your headset •
from the charger and answer the call.
To save energy, unplug the charger when not in use. The charger does not have •
a power switch, so you must unplug the charger from the electric socket when
not in use to avoid wasting power. The charger should remain close to the
electric socket and easily accessible while charging.
Checking the battery level
To check the battery level, press and hold the Volume down button and the Talk button at
the same time. Depending on the battery level, the indicator light flashes 5 times in one of
the following colours:
Battery level
Above 80% Blue “Headset battery level is high”
80 ~20% Violet “Headset battery level is medium”
Below 20% Red “Headset batter y level is low”
Indicator light
colour
Voice prompt
English
7
When the headset battery is low
The headset beeps and the indicator light flashes red. If the headset powers off during a
call, the call will be automatically transferred to the phone.
Wearing the headset
Place the headset on your ear. Be sure to
put the correct (Left, Right) earpiece on
each ear.
8
You can adjust the length of the headset to
give you the best feel and fit.
Using your headset
This section explains how to turn the headset on or off, pair and connect the headset to
the phone, and use various functions.
Activated functions and features may differ depending on the phone type.•
Some devices, especially those that are not tested or approved by the Bluetooth •
Special Interest Group (SIG), may be incompatible with your headset.
To ensure you get the best performance from your headset
Keep the distance between your headset and device as small as possible and avoid •
placing your body or other objects in the signals path.
Covering your headset or device could effect its performance so keep contact to a •
minimum.
The FreeSync application is a downloadable application for Android handsets that
allows you access to your headsets settings as well as enhancing the messaging
experience. (text to speech). FreeSync is only supported by handsets running on
the Froyo platform or later (version 2.2 or newer). You can download the FreeSync
application from the Android market.
English
9
Turning the headset on or off
To turn the headset on
Slide up the power switch. The blue indicator light flashes 4 times and you will hear “Power
on.”
If the headset is turned on for the first time, you will hear “Thank you for using the
Samsung Bluetooth headset. Press voice command button to select language.”
To turn the headset off
Slide down the power switch. The indicator light flashes blue and red then turns off.
Using voice prompts
Voice prompts will inform you about the current status of the headset and usage
instructions. If you can’t hear any voice prompts, make sure the voice prompt feature is
turned on.
Changing the language for the voice prompt
The headset provides the following languages: English, Spanish, French, and German. The
default setting is English.
In Pairing mode, press and hold the voice command button to select a language. •
10
Turning the voice prompt on or off
To turn voice prompts on
In Pairing mode, press and hold the Volume up button for 3 seconds. You will hear “Voice
prompt is on.”
To enter Pairing mode, see page 16.
To turn voice prompts off
In Pairing mode, press and hold the Volume down button for 3 seconds. You will hear
“Voice prompt is off.”
The following voice prompts are available depending on the status:
Status Voice prompt
When you turn the headset
on
When you select a language
for the voice prompt
When you enter Pairing
mode
“Power on”
“Language name selected”
“Ready to pair. Search for the headset from the Bluetooth
menu. Enter 0000 if prompted for a PIN”
English
11
Status Voice prompt
When you turn the voice
prompt on or off
When you turn Multi-point
feature on or off
When you connect the
headset to the devices
When you disconnect the
headset from a device
When you reject or end a call “Call terminated”
When you check the battery
level
Even though the voice prompt feature has been turned off, you can always hear
the following voice prompts.
“Language name selected”•
“Voice prompt is on”• or “Voice prompt is off”
“Voice prompt is on” or
“Voice prompt is off”
“Multi-point mode is on” or
“Multi-point mode is off”
“Device is connected” or
“Two devices are connected”
“Device is disconnected”
“Headset battery level is high” or
“Headset battery level is medium” or
“Headset battery level is low”
12
Using the voice command
You can control your headset using your voice.
Changing the language for the voice command
Your headset can recognize English, Spanish, French, and German commands.
In Pairing mode, press and hold the voice command button to select a language. •
Using the voice command
1 Turn on the voice prompt feature. To turn the voice prompt feature on or off, see
page 11.
2 Press the Voice command button while the headset is in Pairing or Standby mode. To
enter the Pairing mode, see page 16.
3 Wait until the headset asks you to “Say a command”.
If you don’t say any command in 5 seconds, you will hear “Say it again”. And then 5
seconds later, you will hear “Cancelled”. To reactivate the voice command, press the
Voice command button.
4 Say one of the following commands loudly and clearly.
English
13
Command Action
“Select Language”
“Pair mode”
“Answer”
“Ignore”
“Redial”
“Redial Two”
“Phone Voice Command”
“Phone Voice Command
Two”
14
Enter the language selection.
Enter pairing mode.
Answer a call.
Reject a call.
Redial the last number you called on the currently
connected primary phone.
Redial the last number you called on the currently
connected secondary phone.
Access the voice dialing feature of the currently connected
primary phone, if the phone supports it.
Access the voice dialing feature of the currently connected
secondary phone, if the phone supports it.
Command Action
“What Time is it?”
(available when using
FreeSync application)
“Cancel”
Your headset may not recognize voice commands if you speak softly or •
unclearly.
Your headset may inadvertently recognize voice commands from background •
sounds that are louder than your voice.
You can not use voice commands while listening to music with your headset.•
When you say • “Phone voice command” or “Phone voice command two” with
a phone not supporting voice dialing, you will hear “Phone does not support
voice dialing”.
Check the current time.
Cancel the voice command.
English
15
Pairing and connecting the headset
Pairing means a unique and encrypted wireless connection between two Bluetooth
devices when they agree to communicate with each other.
In Pairing mode, two devices should be placed close enough to each other.
Pairing and connecting the headset with a phone
1 Enter Pairing mode.
With the headset turned on, press and hold the Talk button for 3 seconds.The •
blue indicator light stays lit and you will hear “Ready to pair. Search for the headset
from the Bluetooth menu. Enter 0000 if prompted for a PIN.” If you can’t hear any
voice prompts , make sure the voice prompt feature is turned on. To turn the voice
prompts on or off, see page 11.
You can also use the voice command • “Pair mode”.
If the headset is turned on for the first time, it will go into Pairing mode •
immediately and the Pairing mode stays for 3 minutes.
2 Activate the Bluetooth feature on your phone and search for the headset (see your
phone’s user manual).
3 Select the headset (HS6000) from the list of devices found by your phone.
16
4 If requested, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect the headset to
your phone. You will hear “Device is connected.”
Your headset supports the Simple Pairing feature which allows the headset to •
be paired with a phone without requesting a PIN. This feature is available for
phones that are compliant with Bluetooth version 2.1 or higher.
If your phone supports Advanced Audio Distribution Profile (A2DP), you can •
also listen to music with your headset.
The headset can also be paired via the Active Pairing feature. See page 20.
Connecting with two Bluetooth phones
With the Multi-point feature activated, your headset can be connected to 2 Bluetooth
phones at the same time.
1 Connect with the first Bluetooth phone.
2 Activate the Multi-point feature. See page 18.
3 Activate the Bluetooth feature on the second Bluetooth phone and search for the
headset (see your phone’s user manual).
4 Select the headset (HS6000) from the list of devices found by the second
Bluetooth phone.
English
17
5 If requested, enter the Bluetooth PIN 0000 (4 zeros) to connect the headset to the
second Bluetooth phone.
6 Reconnect to the headset from the first Bluetooth phone.
You will hear “Two devices are connected.”
When connecting the headset to 2 Bluetooth phones, some phones may not be
able to connect as a second Bluetooth phone.
To turn Multi-point feature on
In Pairing mode, press and hold the Volume
up button. The blue indicator light flashes
twice and you will hear
is on.”
“Multi-point mode
To turn Multi-point feature off
In Pairing mode, press and hold the Volume
down button. The red indicator light flashes
twice and you
is off.”
will hear “Multi-point mode
Connecting the headset with a music device
You can also pair and connect your headset with a music device such as an MP3 player. The
process of connecting to a music device is the same as for connecting with a phone. When
connected to both devices (phone and music device) you can make or receive a call on the
phone while listening to music from the music device. For more information about control
functions, see page 25.
18
Disconnecting the headset
Turn off the headset or use the Bluetooth menu on your phone to remove the device from
your pairing list.
Reconnecting the headset
To reconnect to the paired phone
Press the Talk button on the headset or use the Bluetooth menu on your phone.•
To reconnect to the paired music device
Press •
button on the headset or use the Bluetooth menu on your music device.
Your headset will attempt to automatically reconnect each time you turn it on.
If the Multi-point feature is activated, your headset will attempt to reconnect to
the two most recently connected devices. This feature may not be supported on
some devices.
English
19
Pairing via the Active pairing feature
With the Active pairing feature, your headset automatically looks for a Bluetooth device
within range and tries to make a connection with it.
1 The phone’s Bluetooth visibility option must be set to on.
2 Place the headset and phone close to each other to avoid pairing with other devices.
3 In Pairing mode (solid blue indicator light), press and hold the Talk button on the
headset. The indicator light color changes to violet. The headset will attempt active
pairing for up to 20 seconds. To enter Pairing mode, see page 16.
The Bluetooth phone you want to connect with must not be paired with •
other devices. If the phone is already connected to another device, end the
connection and restart the Active pairing feature.
This feature may not be supported on some devices.•
When the headset pairs with your phone, a connection is made through the •
Hands-Free Profile. To make a connection through another profile, such as
Advanced Audio Distribution Profile (A2DP), check the phone’s user manual on
how to pair the Bluetooth device.
20
Using call functions
Available call functions may differ from phone to phone.
Making a call
Redialling the latest number
To redial the last number dialed on the primary phone,
Press the Talk button.•
You can also use the voice command • “Redial”.
To redial the last number dialed on the secondary phone,
Press the Talk button twice.•
You can also use the voice command • “Redial Two”.
For some phones, pressing the Talk button opens the call log list. Press the Talk
button again to dial the selected number.
Dialling a number by voice
To voice dial from the primary phone,
Press and hold the Talk button and say a name.•
English
21
You can also use the voice command • “Phone Voice Command”.
To voice dial from the secondary phone,
Use the voice command• “Phone Voice Command Two”.
This function is only available when using the Hands-Free profile.
Answering a call
Press the Talk button to answer a call when you hear incoming call tones.•
You can also say • “Answer” when you hear “Incoming call. Say Answer or Ignore”.
If you receive calls on both connected devices at the same time you can only •
answer the call on the primary phone.
When you are listening to music, the music stops during a call.•
Ending a call
Press the Talk button to end a call.
Rejecting a call
Press and hold the Talk button to reject a call when a call comes in. •
22
You can also say • “Ignore” when you hear “Incoming call. Say Answer or Ignore”.
If you receive calls on both connected devices at the same time you can only •
reject the call on the primary phone.
This function is only available when using the Hands-Free profile. •
Options available during a call
You can use the following functions during a call.
Adjusting the volume
Press the Volume up or down button to adjust the volume.
You will hear a beep when the volume level of the headset reaches it’s lowest •
or highest level.
The volume level may differ when listening to music via a bluetooth •
connection or using it as a normal music headset with the power off.
Muting the microphone
Press and hold the Volume up or down button to turn the microphone off so that the
person with whom you are speaking cannot hear you. When the microphone is turned
off, the headset beeps at regular intervals. Press and hold the Volume up or down button
again to turn the microphone back on.
English
23
Transferring a call from the phone to the headset
Press the Talk button on the headset to transfer a call from the phone to the headset.
Placing a call on hold
Press and hold the Talk button to place the current call on hold.
This function is available only on the Hands-Free profile.
Answering a second call
Press the Talk button to end the first call and answer a second call.•
Press and hold the Talk button to place the first call on hold and answer a second call. To •
switch between the current call and the held call, press and hold the Talk button.
This function is only available when using the Hands-Free profile.•
When the headset is connected with two Bluetooth phones, you cannot answer a •
second call from the same phone. It may vary depending on your phone.
24
Using music control functions
Listening to music
Control playback with the following buttons:
BUTTON FUNC TION
Play/
Pause
REW Slide up to skip backward.•
FF Slide down to skip forward.•
When your headset is connected to two Bluetooth devices and music is being
played in one device, you should stop playing it to control the other device.
Press to start or pause playback on the primary device.•
Press twice to start or pause playback on the secondary •
device.
Press and hold to stop playback.•
Slide up and hold to scan backward.•
Slide down and hold to scan forward.•
English
25
Applying a sound effect (SoundAlive)
You can apply appropriate sound effects for music while listening to music.
To apply a sound mode, such as Normal, Vocal, or Instrument, press the mode button while
listening to music. You can also switch between the sound modes by pressing the mode
button.
Using it as the music headset
Using the line out cable supplied and with the headset powered off, you can use the
headset without the need for power or a BT connection.
1 Plug the line out cable into the
headset.
2 Play your music device and use it as a
normal music headset.
26
Resetting the headset
When the headset is paired with a device, it automatically saves connection and feature
settings, such as the Bluetooth address or device type of the mobile phone.
If you want to reset the connection settings in the headset:
In Pairing mode, press and hold Volume up, Volume down and the Talk button at the •
same time for 3 seconds. The headset will turned on automatically.
When you reset the headset, all connection settings in the headset will be deleted
and the connection with your phone will be lost. In order to use the headset, you
will have to pair it again.
English
27
Appendix
Frequently asked questions
Will my headset work
with laptops, PCs, and
PDAs?
Why do I hear static
or interference while on
a call?
Will my headset interfere
with my
car’s electronics, radio, or
computer?
28
Your headset will work with devices that support
your headset’s Bluetooth version and profiles.
For specifications, see page 31.
Appliances such as cordless phones and wireless
networking equipment may cause interference, which
usually sounds like static. To reduce any interference,
keep the headset away from other devices that use or
produce radio waves.
Your headset produces significantly less power than a
typical mobile phone. It also only emits signals that are
in compliance with the international Bluetooth standard.
Therefore, you should not expect any interference with
standard consumer-grade electronics equipment.
Loading...