Samsung BHM1600 User Manual [en, es]
English ...................................................................................1
Español................................................................................27
Português ............................................................................53
Contents
Getting started
Your headset overview ......................................................................... 4
Button functions .................................................................................... 5
Charging the headset ........................................................................... 6
Wearing the headset ............................................................................8
Using your headset
Turning the headset on or off..............................................................10
Pairing and connecting the headset ................................................... 10
Pairing via the Active pairing feature .................................................. 14
Using call functions............................................................................. 15
1
English
English
Appendix
Frequently asked questions................................................................ 19
Warranty and parts replacement ........................................................ 21
Correct disposal of this product .......................................................... 22
Correct disposal of batteries in this product .......................................23
Specications .....................................................................................24
2
Read this user manual before you start to use your new Bluetooth
headset.
Bluetooth® is a registered trademark of the Bluetooth SIG, Inc.
worldwide — Bluetooth QD ID: B016382
More information about Bluetooth is available at www.bluetooth.com.
Safety precautions
Never disassemble or modify your headset for any reason. Doing this may cause the
•
headset to malfunction or become combustible. Bring the headset to an authorised
service centre to repair it.
When using your headset while driving, follow local regulations in the region you are in.
•
Avoid storage at high temperatures (above 50 °C/122 °F), such as in a hot vehicle
•
or in direct sunlight, as this can damage performance and reduce battery life.
Do not expose the headset or any of its supplied parts to rain or other liquids.
•
Excessive exposure to sound at high volumes can cause hearing damage. Always
turn the volume down before plugging the earphones into an audio source and use
only the minimum volume setting necessary to hear your conversation or music.
English
3
Getting started
This section explains what to remember for the proper use of your Bluetooth
headset.
Your headset overview
Volume button
Talk button
Microphone
Make sure you have the following items with your headset: Travel adapter,
•
User manual.
The items supplied with your headset may vary depending on your region.
•
4
Power button
Ear hook
Charger jack
Earpiece
Indicator light
Button functions
Button Function
Power Press and hold to turn the headset on or off.
Press and hold to enter Pairing mode.
Talk
Volume
You can hear a beep when the volume level of the headset reaches to the lowest
or highest level.
•
Press to make or answer a call.
•
Press to end a call.
•
Press to adjust the volume.
•
Press and hold to turn the microphone on or off.
•
In Pairing mode, press and hold the Volume up button
•
to turn the Multi-point feature on.
In Pairing mode, press and hold the Volume down
•
button to turn the Multi-point feature off.
English
5
Charging the headset
This headset has a rechargeable internal battery which is non-removable. Ensure
that you fully charge the battery before using the headset for the rst time.
1 Plug the small end of the travel adapter into the charger jack.
2 Plug the large end of the travel adapter into a power outlet.
During charging, the indicator light will turn red. If charging does not begin,
unplug the travel adapter and plug it in again.
6
3 When the headset is fully charged, the indicator light changes to blue. Unplug
the travel adapter from the power outlet and the headset.
Use only a Samsung-approved travel adapter. Unauthorised travel adapters
•
may cause an explosion or damage to the headset.
The battery will gradually wear out while charging or discharging because
•
it is a consumable part.
When a call comes in while charging, disconnect your headset from the travel
•
adapter and answer the call.
When the battery charge gets low
The headset beeps and the indicator light ashes red. Recharge the battery. If the
headset powers off during a call, the call will be automatically transferred to the phone.
7
English
Checking the battery level
At the same time, press and hold the Volume down and the Talk button. Depending
on the battery level, the indicator light ashes 5 times in one of the following colours:
Battery level Indicator light colour
Above 80% Blue
80 ~20% Violet
Below 20% Red
Wearing the headset
Place the headset on your ear.
8
Depending on what ear you are going to wear the headset, simply remove and
replace the ear hook.
English
Left
Right
Using your headset
This section explains how to turn the headset on, pair and connect to the phone,
and use various functions.
Activated functions and features may differ depending on the phone type.
•
Some devices, especially those that are not tested or approved by Bluetooth SIG,
•
may be incompatible with your headset.
9
Turning the headset on or off
To turn the headset on, press and hold the power button. The blue indicator light
•
ashes 4 times.
To turn the headset off, press and hold the power button. The indicator light
•
turns off after the blue indicator light changes to red.
Pairing and connecting the headset
Pairing will create a unique and encrypted wireless link between two Bluetooth
enabled devices, such as a Bluetooth phone and a Bluetooth headset.
To use the headset with other Bluetooth devices, the devices must be paired. When
trying to pair the two devices, keep the headset and the phone reasonably close together.
After pairing, you can connect the two devices.
10
Pairing and connecting the headset with a phone
1 Enter pairing mode.
Turn on your headset and press and hold the Talk button until the blue indicator
•
light stays lit.
If you turn the headset on for the rst time, it proceeds into Pairing mode
•
immediately.
2 Activate the Bluetooth feature on your phone and search for the headset
(see your phone’s user manual).
3 Select the headset (HM1600) from the list of devices found by your phone.
4 Enter the Bluetooth PIN (0000, 4 zeros) to pair and connect the headset
to your phone.
Your headset supports the Simple Pairing feature which allows the headset to be
paired with a phone without requesting a PIN. This feature is available for phones
that are compliant with Bluetooth version 2.1 or higher.
The headset also can be paired via the Active pairing feature, see page 14.
English
11
Connecting with two Bluetooth phones
With the Multi-point feature activated, your headset can be connected with two
Bluetooth phones at the same time.
1 After connecting with the rst Bluetooth phone, press and hold the Talk button
until the blue indicator light stays lit.
2 Press and hold the Volume up button to activate the Multi-point feature.
3 Activate the Bluetooth feature on the second Bluetooth phone and search
for the headset (see your phone’s user manual).
4 Select the headset (HM1600) from the list of devices found by the second
Bluetooth phone.
5 Enter the Bluetooth PIN (0000, 4 zeros) to connect the headset to the phone.
6 Reconnect to the headset from the rst Bluetooth phone.
12
You can set the headset automatically to reconnect to the recently connected phones
each time you turn it on.
To reconnect to the two most recently connected phones, activate the Multi-point
•
feature. Press and hold the Volume up button in Pairing mode until the blue
indicator light ashes twice.
To reconnect to only the most recently connected phone, deactivate the Multi-point
•
feature. Press and hold the Volume down button in Pairing mode until the red
indicator light ashes twice.
Disconnecting the headset
To disconnect the headset from your phone,
Turn off the headset.
•
Use the Bluetooth menu on your phone.
•
Reconnecting the headset
When the headset is paired with a phone, it will attempt to automatically reconnect
each time you turn it on.
If the headset does not automatically attempt to reconnect,
Press the Talk button.
•
Use the Bluetooth menu on your phone.
•
13
English
Pairing via the Active pairing feature
With the Active pairing feature, your headset can automatically search for a Bluetooth
phone and try to make a connection with it.
1 Turn on the headset.
2 Press and hold the Talk button to enter Pairing mode.
3 Press and hold the Talk button until the violet indicator light turns on.
The headset will switch to Active Pairing mode, search a Bluetooth phone
within range, and attempt to pair with it.
14
Ensure the phone you wish to connect to is within range of the headset. Place
•
the headset and phone close to each other to avoid pairing with other devices.
The headset will attempt Active pairing for up to 20 seconds.
•
The Bluetooth phone you want to connect with must not be paired with other
•
devices. If the phone is already connected to another device, end the connection
and restart Active pairing feature.
•
This feature is available for mobile phones, but the phone’s Bluetooth visibility
option must be set to on.
•
This feature may be unavailable depending on the some PDAs.
Using call functions
Making a call
Redialling the last number
Press the Talk button to redial the last number of the most recently connected phone.
Press the Talk button twice to redial the last number of the other phone.
English
15
Dialling a number by voice
Press and hold the Talk button to dial a number of the rst phone by voice, and say
a name.
Available call functions may vary by the phone.
Answering a call
Press the Talk button to answer a call when you hear incoming call tones.
When two calls from the two connected phones come in, you can answer the call
of the rst phone.
Ending a call
Press the Talk button to end a call.
Rejecting a call
Press and hold the Talk button to reject a call when a call comes in.
When two calls from the two connected phones come in, you can reject the call
of the rst phone.
16
Using options during a call
You can use the following functions to control your call during a call.
Adjusting the volume
Press the Volume up or down button to adjust the volume.
Muting the microphone
Press and hold the Volume up or down button to turn the microphone off so that
the person with whom you are speaking cannot hear you. When the microphone
is turned off, the headset beeps at regular intervals. Press and hold the Volume up
or down button again to turn the microphone back on.
Transferring a call from the phone to the headset
Press the Talk button to transfer a call from the phone to the headset.
Placing a call on hold
Press and hold the Talk button to place the current call on hold.
When the headset is connected with two phones, this function is not available.
17
English
Answering a second call
Press the Talk button to end the rst call and answer a second call of the
•
same phone when you hear call waiting tones.
Press and hold the Talk button to place the rst call on hold and answer
•
a second call of the same phone when you hear call waiting tones.
To switch between the current call and the held call, press and hold the Talk
•
button.
When the headset is connected with two Bluetooth phones, you cannot answer
a second call of the same phone.
Answering a new call of the second phone
Press the Talk button to end the rst call and answer a second call of the other
•
phone when you hear call waiting tones.
Press and hold the Talk button to place the rst call on hold and answer
•
a second call of the other phone when you hear call waiting tones.
To switch between the current call and the held call, press and hold the Talk
•
button.
18
Appendix
Frequently asked questions
English
Will my headset work
with laptops, PCs, and
PDAs?
Why do I hear static
or interference while
on a call?
Will my headset
interfere with my
car’s electronics,
radio, or computer?
Your headset will work with devices that support
your headset’s Bluetooth version and proles.
For specications, see page
Appliances such as cordless phones and wireless
networking equipment may cause interference, which
usually sounds like static. To reduce any interference,
keep the headset away from other devices that use or
produce radio waves.
Your headset produces signicantly less power than
a typical mobile phone. It also only emits signals that
are in compliance with the international Bluetooth
standard. Therefore, you should not expect any
interference with standard consumer-grade electronics
equipment.
24.
19
Can other Bluetooth
phone users hear
my conversation?
Why do I hear an echo
while on a call?
How do I clean
my headset?
The headset does
not fully charge.
20
When you pair your headset to your Bluetooth phone,
you are creating a private link between only these two
Bluetooth devices. The wireless Bluetooth technology
used in your headset is not easily monitored by third
parties because Bluetooth wireless signals are signicantly
lower in radio frequency power than those produced
by a typical mobile phone.
Adjust the headset volume, or move to another area
and try again.
Wipe it with a soft dry cloth.
The headset and the travel adapter may not have
been connected properly.
Separate the headset from the travel adapter,
reconnect, and charge the headset.
Warranty and parts replacement
Samsung warrants this product as free of defects in material, design and workmanship
for the period of one year from the original date of purchase.*
If during the period of warranty this product proves defective under normal use and
service you should return the product to the retailer from whom it was originally
purchased or qualied service centre. The liability of Samsung and its appointed
maintenance company is limited to the cost of repair and/or replacement of the unit
under warranty.
The warranty is limited to the original purchaser.
•
A copy of your receipt or other proof of purchase is required for a proper
•
warranty service.
The warranty is void if the serial number, date code label or product label
•
is removed, or if the product has been subject to physical abuse, improper
installation, modication, or repair by unauthorised third parties.
Specically exempt from any warranty are limited-life consumable components
•
such as batteries and other accessories.
* Depending on your region, the length of warranty may vary.
21
English
Samsung will not assume any responsibility for any loss or damage incurred
•
in shipping. All repair work on Samsung products by unauthorised third parties
voids any warranty.
Correct disposal of this product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with
separate collection systems)
This marking on the product, accessories or literature indicates that the
product and its electronic accessories (e.g. charger, headset, USB cable) should
not be disposed of with other household waste at the end of their working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate these items from other types of waste and recycle
them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government ofce, for details of where and how they can take these
items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions
of the purchase contract. This product and its electronic accessories should
not be mixed with other commercial wastes for disposal.
22
Loading...