Samsung BD-D5100-ZA User Manual

BD-D5100
AK68-02111A-00
Blu-ray
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
www.samsung.com/register
Disc Player
ENGLISH
2

Key features

Safety Information

Blu-ray Disc Features

Blu-ray Discs support the highest quality HD video available in the industry - Large capacity means no compromise on video quality. The following Blu-ray Disc features are disc dependant and will vary. Appearance and navigation of features will also vary from disc to disc. Not all discs will have the features described below.
Video highlights
The BD-ROM format supports three highly advanced video codecs, including AVC, VC-1 and MPEG-2. HD video resolutions are also supported:
1920 x 1080 High Definition 1280 x 720 High Definition
For High-Definition Playback
To view high-definition contents on a Blu-ray Disc, you need an HDTV (High Definition Television). Some Blu-ray Discs may require you to use the player’s HDMI OUT to view high-definition content. The ability to view high-definition content on Blu-ray Discs may be limited depending on the resolution of your TV.
BD-LIVE
You can use a Blu-ray Disc that supports BD-LIVE to download content provided by the disc manufacturer through a network connection.

Blu-ray Disc Player Features

Playing multimedia files
You can use the USB connection to play various kinds of multimedia files (MP3, JPEG, DivX, etc.) located on a USB storage device.

Warning

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lighting flash and Arrowhead within the triangle is a warning sign alerting you of dangerous voltage inside the product.
WARNING
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
FCC NOTE (for U.S.A)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect this equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This class B digital product meets all requirements of the Canadian Interference ­Causing Equipment Regulations.
Note to CATV system installer
This reminder is provided to call CATV system installer’s attention to Article 820­40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I) that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.
The explanation point within the triangle is a warning sign alerting you of important instructions accompanying the product.
3
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Complies with 21CFR 1040.10 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
DANGER :
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. (FDA 21 CFR)
CAUTION :
CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO THE BEAM (IEC 60825-1)
THIS • PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LÁSER CLASE 1
NOTE
If the Region number of a Blu-ray Disc/DVDs disc does not correspond to the Region number of this player, the player cannot play the disc.

Precautions

Important Safety Instructions
Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.
Read these instructions.1.
Keep these instructions. 2. Heed all warnings.3. Follow all instructions.4. Do not use this apparatus near water.5. Clean only with a dry cloth.6. Do not block any ventilation openings. 7. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such 8. as radiators, heat registers, stoves, or other apparatus (including AV receivers) that produce heat. Do not defeat the safety purpose of 9. the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being 10. walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories 11. specified by the manufacturer.
Use only with the 12. cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning 13. storms or when unused for long periods of time. Refer all servicing to qualified service 14. personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Disc Storage & Management

Disc Handling
Disc Shape
Use discs with regular shapes. If you use an irregular disc (a disc with a special shape), you can damage the player.
Holding discs
Avoid touching the surface of a disc where data has been recorded.
Blu-ray Discs
Do not leave a Blu-ray Disc in the player for long periods of time. Remove the Blu-ray Disc from the player and store it in its case. Be careful not to scratch or leave fingerprints on the surface of the Blu-ray Disc.
DVD-VIDEO, Audio CD (CD-DA)
Wipe off dirt or contamination on the disc with a soft cloth.
Disc Storage
Be careful not to damage the disc because the data on these discs is highly vulnerable to the environment.
Do not keep under direct sunlight. Keep in a cool ventilated area. Store vertically. Keep in a clean, protective jacket. If you move your player suddenly from a cold place to a warm place, condensation may occur on the operating parts and lens and cause abnormal disc playback. If this occurs, unplug the player, wait for two hours, and then connect the plug to the power outlet. Then, insert the disc, and try to play back again.
Handling Cautions
Do not write on the printed side with a ball- point pen or pencil. Do not use record cleaning sprays or antistatic sprays to clean discs. Also, do not use volatile chemicals, such as benzene or thinner. Do not apply labels or stickers to discs. (Do not use discs fixed with exposed tape adhesive or leftover peeled-off stickers.) Do not use scratch-proof protectors or covers.
4
Do not use discs printed with label printers available on the market. Do not load warped or cracked discs. Before connecting other components to this player, be sure to turn them off. Do not move the player while it is playing a disc. The disc can be scratched or damaged and the player’s internal parts can be damaged. Do not put a flower vase filled with water or any small metal objects on the player. Be careful not to put your hand into the disc tray. Do not place anything other than the disc in the disc tray. Interference from exterior sources such as lightening and static electricity can affect the normal operation of this player. If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the AC power cord to the AC power outlet. The player will operate normally. Be sure to remove the disc and turn off the player after use. Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long periods of time. To clean a disc, wipe it in a straight line from the inside to the outside of the disc. Do not expose the player to any liquid. When the AC plug is connected to a wall outlet, the player will still draw power even when it is turned off. It is in standby mode. Do not expose the player to dripping or splashing. Do not put objects filled with liquids, such as vases, on the player. To turn off the player completely so that it draws no power, you must remove its power plug from the wall socket. Consequently, you should keep the player’s power plug easily accessible at all times.
Do not touch the power plug with a wet hand. It can cause an electric shock. Do not plug multiple electric devices into one socket. It can cause the socket to overheat, resulting in a fire. If the player produces an abnormal noise, a burning smell, or smoke, turn off the power switch immediately and disconnect the power plug from the wall outlet. Then, contact the nearest customer center for technical assistance. If you continue to use the product, it may cause an electric shock or fire.
Maintenance of Cabinet
Before you clean the Blu-ray Disc’s cabinet, be sure to disconnect the AC power cord from the AC outlet.
Do not use benzene, thinner, or other solvents for cleaning.
Wipe the cabinet with a soft cloth.
Restrictions on Playback
This player may not respond to all operating commands because some Blu-ray Disc, DVD, and CD discs allow specific or limited operation and provide only certain features during playback. Please note that this is not a defect in the player.
Samsung cannot • guarantee that this player will play every disc bearing the Blu-ray Disc, DVD or CD logo because disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software and/or the manufacture of discs. Please contact the SAMSUNG customer care center if you have questions or encounter difficulty in playing Blu-ray Disc, DVD, or CD discs in this player. Also, refer to rest of this user manual for additional information on playback restrictions.
Contents
KEY FEATURES
Blu-ray Disc Features...................................2
Blu-ray Disc Player Features ........................2
SAFETY INFORMATION
Warning .......................................................2
Precautions .................................................3
Disc Storage & Management ....................... 3
GETTING STARTED
Before using the User Manual ......................5
Accessories .................................................7
Front Panel .................................................. 8
Rear Panel ...................................................8
Remote Control ........................................... 9
CONNECTIONS
A. Connecting to a TV .................................9
B. Connecting to an Audio System ............ 10
C. Connecting to the Network ...................10
SETUP
Initial Settings ............................................12
Accessing the Settings Menu ....................12
Display ......................................................12
Audio .........................................................14
System ...................................................... 15
Network ....................................................16
Language ..................................................17
Security ..................................................... 17
General ......................................................17
Support ..................................................... 17
BASIC FUNCTIONS
Playing a Video ..............................................18
Using the Disc Menu/Title Menu/
Popup Menu..................................................18
Using the Search and Skip Functions ............18
Slow Motion Play/Step Motion Play ...............19
Using the TOOLS button ...............................19
Listening to Music..........................................20
Playing back Pictures ....................................21
Playing back a USB Storage Device ..............21
NETWORK SERVICES
BD-LIVE™ .................................................22
Software Upgrade Notification ................... 22
APPENDIX
Troubleshooting ......................................... 22
Specifications ............................................ 23
5

Getting Started

Before using the User Manual

Disc Types and Contents your player can play
Logo Icon
h z
Z y
-
x o
-
w
-
G
Indicates a function available on a BD-ROM or BD-RE/-R disc recorded in the BD-RE format.
Indicates a function available on a DVD-VIDEO or recorded DVD+RW/DVD-RW(V)/DVD-R/+R discs that have been recorded and finalized.
Indicates a function available on a CD-RW/-R, DVD-RW/-R, BD­RE/-R disc or in a USB storage media containing DivX, MKV, MP4 contents.
Indicates a function available on an audio CD-RW/-R (CD-DA format).
Indicates a function available on a CD-RW/-R, DVD-RW/-R, BD­RE/-R disc or in a USB storage media containing MP3 or WMA contents.
Indicates a function available on a CD-RW/-R, DVD-RW/-R, BD­RE/-R disc or in a USB storage media containing JPEG contents.
because of the disc type or recording conditions.
Content
VIDEO
MUSIC
PHOTO
NOTE
The player may not play certain CD-RW/-R and DVD-R
If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.
Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.
Your player will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds
30 Mbps.
Definition
Disc types your player cannot play
HD DVD DVD-ROM/PD/MV-
Disc, etc
NOTE
Some commercial discs and DVDs discs
purchased outside your region may not play on this player. Playback may not work for some types of discs,
or when you use specific operations, such as angle change and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary. Do not allow the disc to become dirty or
scratched. Fingerprints, dirt, dust, scratches or deposits of cigarette smoke on the recording surface may make it impossible to use the disc for playback. Discs with PAL programs recorded on them
cannot be played using this player. This player is compatible with the NTSC color
system only. When you play a BD-J title
longer than a normal title or some functions may perform slowly. This player may not respond to all operating
commands because some Blu-ray Disc, DVD, and CD discs allow specific or limited operation and provide only certain features during playback. Please note that this is not a defect in the player. Samsung cannot
play every disc bearing the Blu-ray Disc, DVD or CD logo because disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software and/or the manufacture of discs. Please contact the SAMSUNG customer care center if you have questions or encounter difficulty when playing Blu-ray Disc, DVD, or CD discs in this player. Also, refer to rest of this user manual for additional information on playback restrictions.
DVD-RAM Super Audio CD
(except CD layer)
, loading may take
guarantee that this player will
DVD-RW(VR mode) CVD/CD-ROM/CDV/
CD-G/CD-I/LD (CD-Gs play audio only, not graphics.)
3.9 GB DVD-R Disc for Authoring.
Blu-ray Disc Compatibility
Blu-ray Disc is a new and evolving format. Accordingly, disc compatibility issues are possible. Not all discs are compatible and not every disc will play back. For additional information, refer to the Compliance and Compatibility Notice section of this user manual.
Disc Types
BD-ROM
Blu-ray ROM discs can only be played back. This player can play back pre-recorded commercial BD-ROM discs.
BD-RE/-R
Blu-ray RE/-R discs can be recorded on and played back. This player can play back a BD-RE/-R disc recorded by other compatible Blu-ray Disc recorders.
DVD-VIDEO
This player can play back pre-recorded commercial DVDs (DVD-VIDEO discs) with movies. When switching from the first layer to the second layer of a dual-layered DVD-VIDEO disc, there may be momentary distortion in the image and sound. This is not a malfunction of the player.
6
DVD-RW/-R/+R
This player can play back a DVD-RW/-R/+R disc recorded and finalized with a DVD video recorder. The ability to play back may depend on recording conditions.
DVD+RW
This player can play back a DVD+RW disc recorded with a DVD Video recorder. The ability to play back may depend on recording conditions.
Audio CD (CD-DA)
This player can play back CD-DA format audio CD-RW/-R discs. The player may not be able to play some CD-RW/-R discs due to the condition of the recording.
CD-RW/-R
Use a 700 MB (80 minute) CD-RW/-R disc. If possible, do not use an 800MB (90 minute) or larger disc, as the disc may not play back. If the CD-RW/-R disc was not recorded as a closed session, you may experience delays when playing back the beginning of the disc or all recorded files may not play. Some CD-RW/-R discs may not play on this player, depending on the device which was used to burn them. For contents recorded on CD-RW/-R media from CDs for your personal use, playability may vary depending on the contents and discs.
NOTE
Some DivX, MKV and MP4 format discs may
not play, depending on the video resolution and frame rate condition.
Region Code
Both players and discs are coded by region. These regional codes must match for a disc to play. If the codes do not match, the disc will not play. The Region Code for this player is displayed on the rear panel of the player.
Blu-ray
Disc
Region
Code
North America, Central America, South America,
A
Korea, Japan, Taiwan, Hong Kong and South East Asia.
Europe, Greenland, French territories, Middle East, Africa,
B
Australia and New Zealand.
India, China, Russia, Central
C
and South Asia.
The U.S., U.S. territories and
1
Canada
Europe, Japan, the Middle East, Egypt, South Africa,
2
Greenland
Taiwan, Korea, the Philippines,
3
Indonesia, Hong Kong
Mexico, South America, Central America, Australia,
4
New Zealand, Pacific Islands, Caribbean
Russia, Eastern Europe, India, most of Africa, North Korea,
5
Mongolia
China
6
Area
Disc Type
DVD-VIDEO
Copyright
© 2011 Samsung Electronics Co.,Ltd. All rights reserved; No part or whole of this user’s manual may be reproduced or copied without the prior written permission of Samsung Electronics Co.,Ltd.
Supported File Formats
Notes on the USB connection
Your player supports USB storage media, MP3 players, digital cameras, and USB card readers.
The player does not s upport folder or file names longer than 128 characters.
Some USB/External HDD/digital camera devices may not be compatible with the player.
Video File Support
File Extension Container Video Codec Audio Codec Resolution
DivX 3.11/4.x/5.1/6.0
*.avi
*.mkv
*.wmv
AVI
MKV
WMV (wmv9)
H.264 BP/MP/HP
DivX 5.1/6.0
H.264 BP/MP/HP
Your player supports the FAT16, FAT32, and NTFS files systems.
Connect USB devices directly to the player’s USB port. Connecting through a USB cable may cause compatibility problems.
Inserting more than one memory device into a multi-card reader may cause the reader to operate improperly.
The player does not support t he PTP protocol.
Do not disconnect a USB device during a “loading” process.
The bigger the image resolution, the longer the image takes to display.
This player cannot play MP3 files with DRM (Digital Rights Management) downloaded from commercial sites.
Your player only supports the video that is under 30fps (frame rate).
MP3 AC3
MP4v3
VC-1 AP
VC-1 AP
VC-1 SM
DTS
WMA
PCM
MP3 AC3 DTS
WMA
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
7
*.mp4
*.mpg
*.mpeg
Limitations
- Even when the file is encoded by a supported codec mentioned above, a file might not be played if its content has a problem.
- Normal playback is not guaranteed if the file’s container information is wrong or the file itself is corrupted.
- Files having higher Bit rate/frame rate than standard may stutter during sound/video playback.
- Seek (skip) function is not available if the file’s index table is damaged.
Video decoder
- Supports up to H.264 Level 4.1
- Does not support H.264 FMO/ASO/RS, VC1 SP/MP/AP L4 and AVCHD
- MPEG4 SP, ASP :
Below 1280 x 720 : 60 frames max Above 1280 x 720 : 30 frames max
- Does not support GMC 2 or higher
Audio decoder
- Supports WMA 7, 8, 9 and STD
- Does not support WMA 9 PRO multi-channel if number of channels is more than 2 or lossless audio decoding
- Does not support WMA sampling rate of 220/50Hz mono.
Music File Support
File Extension Container Audio Codec Support Range
*.mp3
*.wma
MP4
PS
MP3
WMA
MP4 (mp4v)
H.264 BP/MP/HP
MPEG1
MPEG2
H.264 BP/MP/HP
MP3 -
WMA
Compliant with WMA version 10 *
Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48
*
Bit rates - All bit-rates in the range 5kbps to 384kbps
AAC
MP1, 2
AC3
DTS
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
Logos of Discs the player can play
Blu-ray Disc DTS-HD Master Audio DivX BD-LIVE
Dolby TrueHD
Check for the supplied accessories shown below.
NTSC broadcast system in U.S.A, Canada, Korea,
Audio/Video cable
(AC39-00073A)
User Manual
(AK68-02111A)
Japan
Java

Accessories

Batteries for Remote Control
(AAA Size) (AC43-12002H)
Remote Control (AK59-00132A)
8

Front Panel

Rear Panel

a
c
b
d
e
gh
DISC TRAY
1
REMOTE CONTROL
2
SENSOR
DISPLAY
3
OPEN/CLOSE BUTTON
4
PLAY/PAUSE BUTTON
5
USB HOST
6
POWER BUTTON
7
STOP BUTTON
8
NOTE
You can perform software upgrades using the
When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button on
the player or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the ENTER button.
Opens to accept a disc.
Detects signals from the remote control.
Displays the playing status, time, etc.
Opens and closes the disc tray.
Plays a disc or pauses playback.
You can connect a USB memory flash stick here and use it as storage when the player is connected to BD-LIVE. You can also use the USB Host for software upgrades and MP3/JPEG/DivX/MKV/MP4 playback.
Turns the player on and off.
Stops disc playback.
USB Host jack with a USB memory flash stick only.
f
LAN
1
HDMI OUT
2
DIGITAL AUDIO OUT
3
VIDEO OUT
4
AUDIO OUT
5
b ca
ed
Use for network based services, BD-LIVE, and software upgrades using a network connection.
Using an HDMI cable, connect this HDMI output terminal to the HDMI input terminal on your TV for the best quality picture or to your AV receiver for the best quality sound.
Connects to an AV receiver.
Connects to the video input of external devices using a video cable.
Connects to the audio input of external devices using audio cables.
9

Remote Control

Connections

Tour of the Remote Control
Turn the player on and off.
Press numeric buttons to operate options.
Press to switch the Blu-ray Disc/DVD’s
Use to display the playback information
when playing a Blu-ray Disc/DVD.
Press to skip backwards or forwards.
Press to move to the home menu.
Use to select menu items and change
Installing batteries
subtitle language.
Press to stop a disc.
menu values.
Return to the previous menu.
Press to use Netflix.
Use to enter the disc menu.
Use to enter the popup menu/title menu.
These buttons are used both for menus on the player and also several Blu-ray Disc functions.
Use to access various audio functions on a disc (Blu-ray Disc/DVD). Press to pause a disc.
Press to search a disc backwards or forwards. Press to play a disc.
Press to use the Tools menu.
Press to exit the menu.
Press to see the full screen on a TV.
NOTE
If the remote does not operate properly:
 ▪
   •Check the polarity +/– of the batteries.    •Check if the batteries are drained.    •Check if the remote sensor is blocked by obstacles.    •Check if there is any fluorescent lighting nearby.
CAUTION
!
Dispose of batteries according to local environmental
 ▪
regulations. Do not put them in the household trash.

A. Connecting to a TV

Case 1 : Connecting to a TV with an HDMI Cable - Best Quality (Recommended)
Using an HDMI cable, connect the 1. HDMI OUT terminal on the rear of the player to the HDMI IN terminal of your TV. See page 11.
Turn on the player and TV.2. Press the input selector on your TV remote control until the HDMI signal from the player 3. appears on your TV screen.
NOTE
An HDMI cable outputs digital video/audio, so you don’t need to connect an audio cable.
If the player is connected to your TV in
speed (category 2) HDMI cable. HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the
the HDMI 720p, 1080i, or 1080p output mode, you must use a High
screen. Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of
your TV. When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI
output resolution will be automatically set to the highest supported by the TV. A long HDMI cable may cause screen noise.
If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the AV Out or
Digital Audio Out to your display device or to an audio sytem to hear audio. If both HDMI and Video out are connected at the same time, only the HDMI signal is outputed.
If this occurs, set Deep Color to Off in the menu.
Case 2 : Connecting to a TV with an Audio/Video cable - Good Quality
Using an Audio/Video cable,1. connect the VIDEO OUT (yellow) / AUDIO OUT (red and white) terminals on the rear of the player to the VIDEO IN (yellow) / AUDIO IN (red and white) terminals of your TV. See page 11.
Turn on the player and TV.2. Press the input selector on your TV remote control until the “VIDEO” signal from the player 3. appears on the TV screen.
10
NOTE
Noise may be generated if the audio cable is placed too close to the power cable.
If you want to connect to an AV receiver, please refer to the audio connection instructions.
T
he number and position of the input terminals may vary depending on your TV set. Please refer to the user
manual of your TV.
CAUTION
!
Do not ▪ connect the player to your TV through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted on the television.

B. Connecting to an Audio System

Please turn the volume down when you turn on the AV receiver. A sudden loud sound may cause damage to the speakers and your ears.
Please set the audio format according to the capabilities of your AV receiver.
The position of HDMI input terminals may vary depending on your AV receiver. Please refer to the user manual of your AV receiver.
Case 1 : Connecting to an Audio System (HDMI supported AV receiver) - Best Quality (Recommended)
Press the input select button of the 4. from the player. Refer to your Press the input selector on your TV remote control to select the video source (HDMI or 5. Video.)
AV receiver
AV receiver’s
to select the external input and hear sound
user manual to set the
AV receiver’s
audio input.
Case 3 : Connecting to an Audio System (Stereo Amplifier) - Good Quality
Using the audio cables, connect the 1. AUDIO OUT (red and white) terminals on the rear of the player to the AUDIO IN (red and white) terminals of your Stereo Amplifier. See page 11. Using the video signal cable(s), connect the 2. HDMI or VIDEO OUT terminals on the rear of the player to the HDMI or VIDEO IN terminal of your TV. Turn on the player, TV and Stereo Amplifier3. Press the input select button of the 4. hear sound from the player. Refer to your
audio input.
Amplifier’s Press the input selector on your TV remote control to select the video source (HDMI or 5. Video.)
NOTE
If you use the Digital Audio connection described in Case 2, you will hear audio from the front two speakers
only with the Digital Output set to PCM.
Stereo Amplifier
Stereo Amplifiers
to select the external input in order to
user manual to set the
Stereo
Using an HDMI cable, connect the 1. HDMI OUT terminal on the rear of the player to the HDMI IN terminal of your AV receiver. See page 11. Using an HDMI cable, connect the 2. HDMI OUT terminal of the AV receiver to the HDMI IN terminal of your TV. Turn on the player, 3. TV, and AV receiver. Press the input select button of the 4. AV receiver and TV to select the external input to hear sound from the player. Refer to your AV receiver’s user manual to set the AV receiver’s audio input.
Case 2 : Connecting to an Audio System (AV receiver with Dolby Digital or DTS decoder) - Better Quality
Using a coaxial cable, connect the 1. DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the player to the DIGITAL AUDIO IN (COAXIAL) terminal of your AV receiver. See page 11. Using the video signal cable(s), connect the 2. HDMI or VIDEO OUT terminals on the rear of the player to the HDMI or VIDEO IN terminal of your TV. Turn on the player, T3. V, and AV receiver.

C. Connecting to the Network

This player lets you use network based services such as BD-LIVE, and download software upgrades when it is connected to a network. We recommend using a Broadband modem (with integrated router) or IP router for the connection. For more information on router connections, refer to the user manual of the router or contact the router manufacturer for technical assistance.
Cable Network
Using a Direct LAN (UTP) cable, connect the LAN terminal of the 1. player to the LAN terminal of your modem or router. See page 11 Set the network options. See page 16.2.
NOTE
Internet access to Samsung’s software update server may not be allowed, depending on the router you use
or your ISP’s policy. For more information, contact your ISP (Internet Service Provider). DSL users, please use a router to make a network connection.
Loading...
+ 22 hidden pages