Samsung BD-C8900, BD-C8900M, BD-C8900S Service Manual

Blu-ray Disc Player

Chassis : MIDAS

BASIC : BD-C8900 Application Models:

BD-C8900 / BD-C8900M /

BD-C8900S

Application Area:

If you want to know additional information which is not includ-

ed on this Service Manual, please refer to the SKP(Samsung Knowledge Portal) web site.

SERVICE MANUAL BD-C8900 / BD-C8900M / BD-C8900S

EDC, XEE, XEF, XEG, XEN

SERVICE

Blu-Ray Disc Player Contents

, XEU

Manual

1. Precautions

2. Product Specification

3. Disassembly and Reassembly

Area Web Site

North America URL : http://service.samsungportal.com

Latin America URL : http://latin.samsungportal.com

CIS URL : http://cis.samsungportal.com

Europe URL : http://europe.samsungportal.com

China URL : http://china.samsungportal.com

Asia URL : http://asia.samsungportal.com

Mideast & Africa URL : http://mea.samsungportal.com

This Service Manual is a property of Samsung Electronics Co .,Ltd. Any unauthorized use of Manual can be punished under applicable

International and/or domestic law.

Printed in Korea

4. Troubleshooting

5. Exploded View and Parts List

6. PCB Diagrams

7. Schematic Diagrams

CONTENTS CONTENTS

1. Precautions 1-1 ~ 1-7

1-1 Safety Precautions (1-2) 1-2 Servicing Precautions (1-4) 1-3 ESD Precautions (1-5) 1-4 Handling the optical pick-up (1-6)

2. Product Specication 2-1 ~ 2-14

2-1 Product Specication (2-2)

2-2 Chassis Product Specication (2-9) 2-3 Option Product Specication (2-13)

3. Disassembly and Reassembly 3-1 ~ 3-9

3-1 Cabinet and PCB (3-2) 3-2 PCB Location (3-8)

4. Troubleshooting 4-1 ~ 4-26

4-1 Troubleshooting (4-2) 4-2 Software Update (4-24) 4-3 HDD Replacement (4-26)

5. Exploded View and Parts List 5-1 ~ 5-16

5-1 Cabinet Assembly (5-2) 5-2 Electrical Parts List (5-4)

6. PCB Diagrams 6-1 ~ 6-19

6-1 Wiring Diagram (6-2) 6-2 Main PCB (6-3) 6-3 S.M.P.S PCB (6-9) 6-4 VFD PCB (6-11) 6-5 Deck LED PCB (6-13) 6-6 HDD LED PCB (6-15)

6-7 Touch Key PCB (6-17)

6-8 USB PCB (6-18)

7. Schematic Diagrams 7-1 ~ 7-28

7-1 All Block Diagram (7-2) 7-2 Power (7-3) 7-3 S.M.P.S (S.M.P.S PCB) (7-5) 7-4 Audio/Video Analog Output (Main PCB) (7-6) 7-5 USB/Ethernet Block (Main PCB) (7-8) 7-6 HDMI Video Output (Main PCB) (7-9) 7-7 DDR3 Memory Block (Main PCB) (7-10) 7-8 Interface Block (Main PCB) (7-11) 7-9 Sata Interface (Main PCB) (7-12) 7-10 One-Nand Flash (Main PCB) (7-13) 7-11 DVB-T/C Nim (Main PCB)(BD-C8900) (7-14) 7-12 DVB-T2 Nim (Main PCB)(BD-C8900M) (7-15) 7-13 DVB-S2 Nim (Main PCB)(BD-C8900S) (7-16) 7-14 CI/CI+ Interface (Main PCB) (7-17) 7-15 Front-Micom (Main PCB) (7-18) 7-16 Barcelona Power (Main PCB) (7-19) 7-17 Power Supply (Main PCB) (7-20) 7-18 JTAG-Debug (Main PCB) (7-21) 7-19 F/E Servo Block (Main PCB) (7-22) 7-20 Front-End Block (Main PCB) (7-23) 7-21 VFD (VFD PCB) (7-24) 7-22 Deck LED (Deck LED PCB) (7-25) 7-23 HDD LED (HDD LED PCB) (7-26) 7-24 Touch Key (Touch Key PCB) (7-27)

1. Precautions

1-1 Safety Precautions ----------------------------------------------------------------------------- 1-2

1-2 Servicing Precautions ------------------------------------------------------------------------1-4

1-3 ESD Precautions --------------------------------------------------------------------------------- 1-5

1-4 Handling the optical pick-up ------------------------------------------------------------- 1-6

Precautions

Samsung Electronics 1-1

Precautions

1-2 Samsung Electronics

1-1 Safety Precautions

1) Before returning an instrument to the customer, always make a safety check of the entire instrument, including, but not limited to, the following items:

(1) Be sure that no built-in protective devices are defective or have been damaged during servicing. (2)Protective shields are provided to protect both the technician and the customer. Correctly replace all missing protective shields, including any removed for servicing convenience. (3)When reinstalling the chassis and/or other assembly in the cabinet, be sure to put back in place all protective devices, including, but not limited to, nonmetallic control knobs, insulating fish papers, adjustment and compartment covers/shields, and isolation resistor/capacitor networks. Do not operate this instrument or permit it to be operated without all protective devices correctly installed and functioning.

(4) Be sure that there are no cabinet openings through which adults or children might be able to insert their fingers and contact a hazardous voltage. Such openings include, but are not limited to, excessively wide cabinet ventilation slots, and an improperly fitted and/or incorrectly secured cabinet back cover.

(5) Leakage Current Hot Check-With the instrument completely reassembled, plug the AC line cord directly into a 230V(220V ~ 240V) AC outlet. (Do not use an isolation transformer during this test.) Use a leakage current tester or a metering system that complies with the American National Standards Institute (ANSI) C101.1 Leakage Current for Appliances and Underwriters Laboratories (UL) 1270 (40.7). With the instrument’s AC switch first in the ON position and then in the OFF position, measure from a known earth ground (metal water pipe, conduit, etc.) to all exposed metal parts of the instrument (antennas, handle brackets, metal cabinets, screwheads, metallic overlays, control shafts, etc.), especially any exposed metal parts that offer an electrical return path to the chassis. Any current measured must not exceed 0.5mA. Reverse the instrument power cord plug in the outlet and repeat the test. See Fig. 1-1.

Any measurements not within the limits specified herein indicate a potential shock hazard that must be eliminated before returning the instrument to the customer.

Fig. 1-1 AC Leakage Test

(6) Insulation Resistance Test Cold Check-(1) Unplug the power supply cord and connect a jumper wire between the two prongs of the plug. (2) Turn on the power switch of the instrument. (3) Measure the resistance with an ohmmeter between the jumpered AC plug and all exposed metallic cabinet parts on the instrument, such as screwheads, antenna, control shafts, handle brackets, etc. When an exposed metallic part has a return path to the chassis, the reading should be between 1 and 5.2 megohm. When there is no return path to the chassis, the reading must be infinite. If the reading is not within the limits specified, there is the possibility of a shock hazard, and the instrument must be repaired and rechecked before it is returned to the customer. See Fig. 1-2.

Fig. 1-2 Insulation Resistance Test

Samsung electronics 1-2

Samsung Electronics 1-3

Precautions

2) Read and comply with all caution and safety related notes on or inside the cabinet, or on the chassis.

3) Design Alteration Warning-Do not alter or add to the mechanical or electrical design of this instrument. Design alterations and additions, including but not limited to, circuit modications and the addition of items such as auxiliary audio output connections, might alter the safety characteristics of this instrument and create a hazard to the user. Any design alterations or additions will make you, the servicer, responsible for personal injury or property damage resulting therefrom.

4) Observe original lead dress. Take extra care to assure correct lead dress in the following areas: (1) near sharp edges, (2) near thermally hot parts (be sure that leads and components do not touch thermally hot parts), (3) the AC supply, (4) high voltage, and (5) antenna wiring. Always inspect in all areas for pinched, out-of-place, or frayed wiring, Do not change spacing between a component and the printed-circuit board. Check the AC power cord for damage.

5) Components, parts, and/or wiring that appear to have overheated or that are otherwise damaged should be replaced with components, parts and/ or wiring that meet original specications. Additionally, determine the cause of overheating and/or damage and, if necessary, take corrective action to remove any potential safety hazard.

6) Product Safety Notice-Some electrical and mechanical parts have special safety-related characteristics which are oen not evident from visual inspection, nor can the protection they give necessarily be obtained by replacing them with components rated for higher voltage, wattage, etc. Parts that have special safety characteristics are identied by shading or ( )on schematics and parts lists. Use of a substitute replacement that does not have the same safety characteristics as the recommended replacement part might create shock, re and/or other hazards. Product safety is under review continuously and new instructions are issued whenever appropriate.

Precautions

1-4 Samsung Electronics

1-2 Servicing Precautions

CAUTION : Before servicing units covered by this

service manual and its supplements, read and follow the Safety Precautions section of this manual. Note : If unforeseen circumstances create conict between the following servicing precautions and any of the safety precautions, always follow the safety precautions. Remember: Safety First.

1-2-1 General Servicing Precautions

(1) a. Always unplug the instrument’s AC powercord from the AC power source before (1) removing or reinstalling any component, circuit board, module or any other instrument assembly, (2) disconnecting any instrument electrical plug or other electrical connection, (3) connecting a test substitute in parallel with an electrolytic capacitor in the instrument.

b. Do not damage any plug/socket B+ voltage interlocks with which instruments covered by this service manual might be equipped.

c. Do not apply AC power to this instrument and or any of its electrical assemblies unless all solid-state device heat sinks are correctly installed.

d. Always connect a test instrument’s ground lead to the instrument chassis ground before connecting the test instrument positive lead. Always remove the test instrument ground lead last.

(4) An insulation tube or tape is sometimes used and some components are raised above the printed wiring board for safety. e internal wiring is sometimes clamped to prevent contact with heating components. Install such elements as they were.

(5) Aer servicing, always check that the removed screws, components, and wiring have been installed correctly and that the portion around the serviced part has not been damaged and so on. Further, check the insulation between the blades of the attachment plug and accessible conductive parts.

1-2-2 Insulation Checking Procedure

Disconnect the attachment plug from the AC outlet and turn the power ON. Connect the insulation resistance meter (500V) to the blades of the attachment plug. e insulation resistance between each blade of the attachment plug and accessible conductive parts(see note) should be more than 1 Megohm.

Note : Accessible conductive parts include metal panels, input terminals, earphone jacks, etc.

Note : Refer to the Safety Precautions section ground lead last.

(2) e service precautions are indicated or printed on the cabinet, chassis or components. When servicing, follow the printed or indicated service precautions and service materials.

(3) e components used in the unit have a specied ame resistance and dielectric strength. When replacing components, use components which have the same. Components identied by shading, in the circuit diagram are important for safety or for the characteristics of the unit. Replace old components with exact duplicates.

Samsung Electronics 1-5

Precautions

1-3 ESD Precautions

Electrostatically Sensitive Devices (ESD)

Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive Devices(ESD). Examples of typical ESD devices are integrated circuits and some eld-eect transistors and semiconductor chip components. e following techniques should be used to help reduce the incidence of component damage caused by static electricity:

(1) Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain o any electrostatic charge on your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging wrist strap device, which should be removed for potential shock reasons prior to applying power to the unit under test.

CAUTION : Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.

(8) Minimize body motions when handling unpackaged replacement ESD devices. (Otherwise harmless motions such as the brushing together of your clothes fabric or the liing of your foot from a carpeted oor can generate static electricity sucient to damage an ESD device).

(2) Aer removing an electrical assembly equipped with ESD devices, place the assembly on a conductive surface such as aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly.

(3) Use only a grounded-tip soldering iron to solder or unsolder ESD devices.

(4) Use only an anti-static solder removal devices. Some solder removal devices not classied as “anti-static” can generate electrical charges su cient to damage ESD devices.

(5) Do not use freon-propelled chemicals. ese can generate electrical charges sucient to damage ESD devices.

(6) Do not remove a replacement ESD device from its protective package until immediately before installing it. (Most replacement ESD devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable conductive materials).

(7) Immediately before removing the protective materials from the leads of a replacement ESD device, touch the protective material to the chassis or circuit assembly into which the device will be installed.

Precautions

1-6 Samsung Electronics

1-4 Handling the optical pick-up

e laser diode in the optical pick up may suer electrostatic breakdown because of potential static electricity from clothing and your body.

e following method is recommended. (1) Place a conductive sheet on the work bench (e black sheet used for wrapping repair parts.)

(2) Place the set on the conductive sheet so that the chassis is grounded to the sheet.

(3) Place your hands on the conductive sheet(is gives them the same ground as the sheet.)

(4) Remove the optical pick up block

(5) Perform work on top of the conductive sheet. Be careful to let your clothes or any other static sources touch the unit.

u Be sure to put on a wrist strap grounded to the sheet. u Be sure to lay a conductive sheet, that is grounded to the table, made of copper.

Fig.1-3

(6) Short the short terminal on the PCB, which is inside the Pick-Up ASS’Y, before replacing the Pick Up. (e short terminal is shorted when the Pick Up Ass’y is being lied or moved.)

(7) Aer replacing the Pick-up, open the short terminal on the PCB.

Samsung Electronics 1-7

Precautions

M E M O

Product Specication

2. Product Specication

2-1 Product Specication ------------------------------------------------------------------------- 2-2

2-2 Chassis Product Specication ---------------------------------------------------------- 2-9

2-3 Option Product Specication ----------------------------------------------------------2-13

Samsung Electronics 2-1

Product Specication

2-2 Samsung Electronics

2-1 Product Specication

Weight 3.9 Kg

Dimensions 430 (W) X 290 (D) X 62 (H) mm

General

Disc

Video

Output

Video/Audio

Audio

Output

HDD

Capacity

Operating Temperature Range +5°C to +35°C

Operating Humidity Range 10 % to 75 %

Power Consumption

BD Reading Speed : 4.917m/sec

DVD (Digital Versatile Disc)

CD : 12 cm (COMPACT DISC)

CD : 8 cm (COMPACT DISC)

Composite Video

Component Video

HDMI

2 Channel L(1/L), R(2/R)

Digital Audio Output

*Frequency Response

*S/N Ratio 110 dB

*Dynamic Range 100 dB

*Total Harmonic Distortion

BD-C8800A

BD-C8900/C8900M/C8900S/C8900A

Normal : 28W

Stand-By : 1.2W

Reading Speed : 3.49 ~ 4.06 m/sec.

Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.

Reading Speed : 4.8 ~ 5.6 m/sec.

Maximum Play Time : 74 min.

Reading Speed : 4.8 ~ 5.6 m/sec.

Maximum Play Time : 20 min.

1 channel : 1.0 Vp-p (75 Ω load)

Blu-ray/DVD Disc : 576i/480i

Y : 1.0 Vp-p (75 Ω load)

Pr : 0.70 Vp-p (75 Ω load)

Pb : 0.70 Vp-p (75 Ω load)

Blu-ray Disc : 1080i, 720p, 576p/480p, 576i/480i DVD : 576p/480p, 576i/480i

1080p, 1080i, 720p, 576p/480p

PCM multichannel audio, Bitstream audio

Optical

48 kHz Sampling : 4 Hz to 22 kHz

96 kHz Sampling : 4 Hz to 44 kHz

0.003%

250GB

500GB

Samsung Electronics 2-2

Samsung Electronics 2-3

Product Specication

3 4 5 6 7 8 9 10 11 12 13 14 15

▼

PLAY MOVIE LANGUAGES SCENE SELECTIONS PREVIEWS

2-1-1 Player Features

 qSupports a Variety of Disc Types

- Blu-ray (BD-ROM, BD-RE, BD-R), DVD Video, DVD-RW/-R (V mode and nalized only) discs and Audio CD.

- CD-RW/CD-R, DVD-RW/-R and USB storage device content such as MP3, JPEG and DivX les.

 qHDMI (High Denition Multimedia Interface) HDMI reduces picture noise by allowing a pure digital video/audio signal path from the player to your TV.

2-1-2 Blu-ray Disc Features

Blu-ray Discs can store 25 GB (single layer) or 50 GB (dual layer) on a single sided disc - about 5 to 10 times the capacity of a DVD. Blu-ray Discs also support the highest quality HD video available in the industry (up to 1920 x 1080 at 40 Mbit/sec) - Large capacity means no compromise on video quality. Furthermore, a Blu-ray Disc has the same familiar size and look as DVD. * e following Blu-ray Disc features are disc dependant and will vary. Appearance and navigation of features will also vary from disc to disc. Not all discs will have the features described below.

 qVideo highlights e BD-ROM format for movie distribution supports three highly advanced video codecs, including AVC, VC-1, and MPEG-2. HD video resolutions are also available:

- 1920 x 1080 HD

- 1280 x 720 HD

 qFor High-Denition Playback To view high-denition contents in BD discs, an HDTV (High Denition Television) is required.Some discs may require using the player's HDMI OUT to view high-Denition content. e ability to view high-Denition content on BD discs may be limited depending on the resolution of your TV.

 qGraphic planes Two individual, full HD resolution (1920x1080) video layers are available on top of the HD video layer. One layer is assigned to video-related graphics (like subtitles), and the other layer is assigned to interactive elements, such as buttons or menus. Various wipes, fades and scroll eects may be available on both layers.

 qMenu graphics Support 256 full color resolution graphics and animation, thereby greatly surpassing the capabilities of DVD- Video. Unlike DVD, Menus can be accessed during video playback.

 qMenu sounds When you highlight or select a menu option on a Blu-ray disc, sounds can be heard such as button clicks or a voiceover explaining the highlighted menu choice.

 qMulti-page/PopUp Menus With DVD-Video, playback is interrupted each time a new menu screen is accessed. Due to Blu-ray Disc's ability to preload data from the disc without interrupting playback, a menu may consist of several pages. You can browse through the menu pages or select dierent menu paths, while the audio and video remain playing in the background.

 qInteractivity Certain Blu-ray Discs may contain Animated menus and Trivia games.

 qUser Browsable Slideshows With Blu-ray Discs, you can browse through various still pictures while the audio remains playing.

 qSubtitles

Product Specication

2-4 Samsung Electronics

Depending on what is contained on the Blu-ray Disc, you may be able to select dierent font styles, sizes and colors for the subtitles, Subtitles may also be animated, scrolled or faded in and out.

 qBD-LIVE You can use a Blu-ray Disc supporting BD-LIVE through network connection to enjoy various contents provided by the disc manufacturer.

2-1-3 Disc Types and Contents that can be played

Term Logo Denition

HDD This involves a function available on the HDD.

BD-ROM This involves a function available on a BD-ROM.

BD-RE/-R This involves a function available on a BD-RE/-R disc recorded in the BD-RE format.

DVD-VIDEO This involves a function available on a DVD-VIDEO.

DVD-RW(V)

DVD-R

DVD+RW

DVD+R

Audio CD This involves a function available on an audio CD-RW/-R (CD-DA format).

MP3

WMA

JPEG - This involves a function available on CD-RW/-R, DVD±RW/±R, BD-RE/-R discs or HDD.

DivX MKV MP4

[Note] r e product may not play certain CD-RW/-R and DVD-R due to the disc type or recording conditions. r If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable. r If contents which are consisting of more than 10 Mbps bit-rate have been recorded in DVD-R, it is not supported. If contents which are consisting of more than 30 Mbps bit-rate have been recorded in BD-R or USB, it is not supported.

This involves a function available on recorded DVD+RW or DVD-RW(V)/DVD-R/+R

discs that have been recorded and nalized.

- This involves a function available on CD-RW/-R, DVD±RW/±R, BD-RE/-R discs or HDD.

Samsung Electronics 2-5

Product Specication

2-1-4 Disc types that cannot be played

 qBlu-ray Discs with a region code other than "Region B".  qDVD-VIDEO with a region number other than "2" or "ALL" (BD-C8900/C8900M/C8900S).  qDVD-VIDEO with a region number other than "4" or "ALL" (BD-C8900A/8800A).  qHD DVD  qDVD-RAM  qDVD-RW(VR mode)  q3.9 GB DVD-R Disc for Authoring.  qDVD-ROM/PD/MVDisc, etc  qSuper Audio CD (except CD layer)  qCVD/CD-ROM/CDV/ CD-G/CD-I/LD (CD-Gs play audio only, not graphics.)

[Note] r Some commercial discs and DVD discs purchased outside your region may not be playable with this product. When these discs are played, either "is disc can not be played." or "Please check the regional code of the disc." will be displayed. r Playback may not work for some types of discs, or when specic operations, such as angle change and aspect ratio adjustment, are being performed. Information about the discs is written in detail on the disc box. Please refer to this if necessary. r Do not allow the disc to become dirty or scratched. Fingerprints, dirt, dust, scratches or deposits of cigarette smoke on the recording surface may make it impossible to use the disc for playback. r Discs with PAL programs recorded on them cannot be played using this product. r is product is compatible with the NTSC color system only. r When a BD-J title is played, loading may take longer than a normal title, or some functions may perform slowly. r is product may not respond to all operating commands because some Blu-ray, DVD and CD discs allow specic or limited operation and features during playback. Please note that this is not a defect in the product. r Samsung cannot assure that this product will play every disc bearing the Blu-ray Disc, DVD or CD logo because disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, CD soware and/or the manufacture of discs. Please contact the SAMSUNG customer care center if you have questions or encounter diculty in playing Blu-ray Disc, DVD, CD discs in this product. Also, refer to rest of this user manual for additional information on playback restrictions.

2-1-5 Region code

Both the product and the discs are coded by region. ese regional codes must match in order to play the disc. If the codes do not match, the disc will not play. e Region Number for this product is described on the rear panel of the product.

Disc Type Region Code Area

North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia.

Blu-ray

DVD-VIDEO

Europe, Greenland, French territories, Middle East, Africa, Australia and New Zealand.

India, China, Russia, Central and South Asia.

The U.S., U.S. territories and Canada

Europe, Japan, the Middle East, Egypt, South Africa, Greenland

Taiwan, Korea, the Philippines, Indonesia, Hong Kong

Mexico, South America, Central America, Australia, New Zealand, Pacic Islands, Caribbean

Russia, Eastern Europe, India, most of Africa, North Korea, Mongolia

China

Product Specication

2-6 Samsung Electronics

2-1-6 Blu-ray Disc Compatibility

Blu-ray Disc is a new and evolving format. Accordingly, disc compatibility issues are possible. Not all discs are compatible and not every disc will play back. For additional information, refer to the Compliance and Compatibility Notice section of this Manual. If you encounter compatibility problems, please contact the SAMSUNG customer care center. is Samsung Blu-ray disc player supports only the BDROM Prole 2 (a.k.a. BD-LIVE). If you want to play newer versions of discs, you may need to update the player's rmware. Please refer to http://www.samsung.com or contact SAMSUNG customer care center at 1-800 SAMSUNG.

2-1-7 Disc Types

 qBD-ROM

- is Blu-ray disc can only be played back. is product can play back pre-recorded commercial BD-ROM discs.

 qBD-RE/-R

- is Blu-ray disc can be recorded and played back. is product can play back a BD-RE/-R disc recorded by other compatible Blu-ray disc recorders.

 qDVD-VIDEO

- is product can play back pre-recorded commercial DVD discs (DVD-VIDEO discs) with movies.

- When switching from the rst layer to the second layer of a dual-layered DVD-VIDEO disc, there may be momentary distortion in the image and sound. is is not a malfunction of the product.

 qDVD-RW

- is product can play back a DVD-RW disc recorded and nalized with a DVD video recorder. Ability to play back may depend on recording conditions.

 qDVD-R

- is product can play back a DVD-R disc recorded and nalized with a DVD Video recorder. Ability to play back may depend on recording conditions.

 qDVD+RW

- is product can play back a DVD+RW disc recorded with a DVD Video recorder. Ability to play back may depend on recording conditions.

 qDVD+R

- is product can play back a DVD+R disc recorded and nalized with a DVD Video recorder. Ability to play back may depend on recording conditions.

 qAudio CD (CD-DA)

- is product can play back CD-DA format audio CD-RW/-R discs.

- e product may not be able to play some CD-RW/-R discs due to the condition of the recording.

 qCD-RW/-R

- Use a 700MB(80 minutes) CD-RW/-R disc. If possible, do not use a disc with 800MB (90 minutes) or higher, because the disc may not play back.

- If the CD-RW/-R disc was not recorded as a closed session, you may experience delays when playing back the beginning of the disc or all recorded les may not play.

- Some CD-RW/-R discs may not be playable with this product, depending on the device which was used to burn them. For contents recorded on CD-RW/-R media from CDs for your personal use, playability may vary depending on contents and discs.

Samsung Electronics 2-7

Product Specication

2-1-8 Supported File Formats

BRCM Video File Support

File Extention Container Video Codec Resolution Frame rate (fps) Bit rate (Mbsp) Audio Codec

Divx 3.11/4.x/5.1/6.0 1920x1080 6 ~ 30 8

XviD 1920x1080 6 ~ 30 8

*.avi AVI

*.mkv MKV

*.asf ASF

*.wmv ASF Window Media Video v9 1920x1080 6 ~ 30 25 WMA

*.mp4 MP4

*.3gp 3GPP

*.vro

*.mpg

*.mpeg

*.ts *.tp

*.trp

VRO VOB

H.264 BP/MP/HP 1920x1080 6 ~ 30 25