Samsung AWT18WHB, AWT24WHB User Manual
USER'S MANUAL
AWT18YM Series
AWT24YM Series
AWT18WM Series
AWT24WM Series
AWT18WH Series
AWT24WH Series
A
E
DB98-28078A-6
Window-type Room Air Conditioner (Cooling)
Register your product at www.samsung.com/register
Safety Precautions
The following safety precautions must be taken when using your air conditioner.
WARNING
DURING OPERATION
DISPOSING OF THE UNIT
O
THERS
Risk of electric shock. • Can cause injury or death. • Disconnect all
remote electric power supplies before servicing, installing or cleaning.
• This must be done by the manufacturer or its service agent or a similar
qualified person in order to avoid a hazard.
Users of this product are cautioned not to attempt repair of this product at their
u
own discretion. Instead, they are requested to directly contact a designated
service center or the outlet at which the product was purchased.
Never spill any kind of liquid into the unit. Should this happen, unplug or main
u
switch off the unit and contact an authorized service center.
Do not insert anything between the air outlet blades because the inner fan may
u
be damaged and could cause injury. Keep children away from the unit.
Do not place any obstacles in front of the unit.
u
Do not spray liquid of any kind into the indoor unit. Should this happen, switch off
u
the breaker used for your air conditioner and contact your installation specialist.
Make sure that the unit is correctly ventilated at all times:
u
Do not place clothing or other materials over it.
If the wireless remote control will not be used for a long time, remove the
u
batteries. (If applicable)
When using a wireless remote control, the distance should not be more than 7
u
meters from the air conditioner. (If applicable)
The air conditioner must be plugged into its own specific power source, which
u
must be installed in compliance with national wiring,earthing and safety
regulations.
If the power cord is damaged in any way, it must be replaced by the manufacturer
u
or its service agent or a similarly qualified person in order to avoid a hazard.
This device must be installed according to the national electrical rules.
u
The appliance must be installation that the plug should be easily accessible
u
after installation.
If the fuse on PC board is broken please change it with the type of T 3.15A 250V.
u
The breaker of the air conditioner should be all-pole switch; and the distance
u
between its two contacts should be no less than 3.5mm. Such means for
disconnection must be incorporation in the fixed wiring.
Before throwing out the device, it is necessary to pull back the battery cells and
u
get rid of them safely for recycling reasons.
When you need to dispose of the unit, consult your dealer. If pipes are removed
u
incorrectly, refrigerant may blow out and come into contact with your skin,causing
injury. Releasing refrigerant into the atmosphere also damages the environments.
Please recycle or dispose of the packaging material for this product in an
u
environmentally responsible manner.
Never store or ship the air conditioner upside down or sideways to avoid damage
u
to the compressor.
The appliance is not intended for use by young children or infirm persons without
u
supervision: Young children should be supervised to ensure that they do not play
with the appliance.
Max current is measured according to IEC standard for safety and current is
u
measured according to ISO standard for energy efficiency.
E-2
Contents
PREPARING YOUR AIR CONDITIONER
n Safety Precautions ........................................................................................ 2
n Air Conditioning Unit-Main Parts, Buttons and Display ................................. 4
n Remote Control-Buttons ................................................................................ 5
n Getting Started .............................................................................................. 6
n Inserting the Remote Control Batteries ........................................................ 7
OPERATING YOUR AIR CONDITIONER
n Cooling Your Room ....................................................................................... 8
n Airing Your Room .......................................................................................... 9
n Removing Excess Humidity........................................................................... 10
n Adjusting the Air Flow Direction Horizontally ................................................ 11
n Adjusting the Air Flow Direction Vertically .................................................... 11
PROGRAMMING YOUR AIR CONDITIONER
n Setting the On Timer ..................................................................................... 12
n Setting the Off Timer ..................................................................................... 13
n Selecting Good Sleep mode ......................................................................... 14
n Selecting Energy saving mode ...................................................................... 15
RECOMMENDATIONS FOR USE
n Temperature and Humidity Ranges .............................................................. 15
n Cleaning Your Air Conditioner ....................................................................... 16
n Solving Common Problems ........................................................................... 17
METHOD OF INSTALLATION....................................................................... 18
CAUTION
“The high inrush current of the starting compressor motor can have adverse effects to
the operation of other equipment under unfavorable mains conditions. This equipment
does not comply with the relevant technical standards for the limitation of voltage
fluctuations and flicker.”
Before connection this equipment to the power supply system, please report to your
suply authority and obtain the consent.
Do not connect other electric appliances to the same supply lines.
E-3
Air Conditioning Unit - Main Parts, Buttons and Display
g
The design and shape are subject to
change according to the model.
Air inlet (Inside)
Air filter
(The air filter is
located inside)
Inner air flow blades
(right/left orientation)
Air outlet
Outer air flow blades
(up/down orientation)
Air inlet (Outside)
Ventilation lever
Power Cable
Temperature / Timer
Timer setting button
Good Sleep button
Energy Saver indicator
Energy Saver button
Remote Control sensor
Air flow blade swing indicator
indicator
Fan speed adjustment
button
ON/OFF button
Power cable connection
g
should be committed to
an installation engineer.
Operating mode indicators
(COOL,DRY,FAN)
Operating mode selection
button (COOL,DRY,FAN)
Temperature adjustment
buttons
Timer indicator
Good Sleep indicator
E-4
Remote Control - Buttons
Timer setting button
Good Sleep button
Operating mode
selection buttons
Energy Saver button
Air flow blade swing button
Temperature adjustment
buttons
Fan speed adjustment
buttons
ON/OFF button
E-5
Getting Started
You have just purchased a window-type room air conditioner and it has been installed by your
installation specialist.
Your Owenr’s Instructions contain valuable information on using your air conditioner.
Please take the time to read them as they will help you take full advantage of the unit’s functions.
This Owner’s Instructions is just for using your air conditioner correctly.
Thus, the illustrations shown in this manual may not exactly match your air conditioners.
The booklet is organized as follows.
The following figures are shown on pages 4 and 5:
- Air conditioning unit (main parts, buttons and display)
- Remote control (buttons)
They will help you find the buttons and understand the symbols displayed.
In the manual, you will find a series of step-by-step procedures for each function available.
The illustrations in the step-by-step procedures use four different symbols:
PRESS PUSH IMPORTANT NOTE
Moreover,applicable, wherever the illustrations show the positions of the buttons on both the
remote control and the unit itself.
For the... The illustrations have a...
Remote control Gray background.
Example:
Unit itself White background.
Example:
E-6
Loading...