Samsung AWT24FAHEA, AWT24FAHBB, AWT24FAHBA, AWT19FAHEA, AWT18FAHEA User Manual

...
E A
DB98-13919A(1)
OWNER’S INSTRUCTIONS
AWT18FAHBA AWT18FAHEA AWT24FAHBA AWT24FAHEA
Window-type Room Air Conditioner
( Cool )
CCCCAAAAUUUUTTTTIIIIOOOONN
NN
The following safety precautions must be taken when using your air conditioner.
Safety Precautions
1 The unit must be plugged into an independent circuit.
The air conditioner must be installed in accordance with national wiring regulations and safety regulations wherever applicable.
2 Some installation locations may require installation of a short circuit breaker or grounding.
4 MAKE sure that the unit is correctly ventilated at all times :
do NOT place clothing or other materials over it.
5 NEVER spill any kind of liquid into the unit. Should this happen, unplug the unit and contact
an authorized service center.
6 Do NOT insert anything between the air outlet blades because the inner fan may be damaged
and could cause injury. Keep children away from the unit. 7 Do NOT place any obstacles in front of the unit. 8 Users of this product are cautioned not to attempt repairs.
Instead, they are requested to directly contact a designated service center or the outlet
at which the product was purchased. 9 Do not use an extension cord with this product.
10 The appliance is not intended for use by young children without supervision ;
young children should be supervised to ensure that they do not play with the appliance.
11 Never store or ship the air conditioner upside down or sideways to avoid damage to the
compressor.
12 Max current is measured according to IEC standard for safety and current is measured
according to ISO standard for energy efficiency.
3 If the supply cord is damaged, it must be replaced by a special cord or assembly available
from the manufacturer or its service agent.
E-2
Contents
PREPARING YOUR
AIR CONDITIONER
Safety Precautions ......................................................................................... 2
Air Conditioning Unit - Main Parts, Buttons and Display ............................... 4
Remote Control Buttons ................................................................................. 5
Getting Started ............................................................................................... 6
Inserting the Remote Control Batteries .......................................................... 7
OPERATING YOUR AIR CONDITIONER
Cooling Your Room ........................................................................................ 8
Airing Your Room ........................................................................................... 9
Adjusting the Air Flow Direction Horizontally .................................................. 10
Adjusting the Air Flow Direction Vertically ...................................................... 10
P
ROGRAMMING YOUR AIR CONDITIONER
Setting the On Timer ...................................................................................... 11
Setting the Off Timer ...................................................................................... 12
Setting the Sleep Timer .................................................................................. 13
Selecting Energy Saving mode ...................................................................... 14
RECOMMENDATIONS FOR USE
Temperature and Humidity Ranges ................................................................ 14
Cleaning Your Air Conditioner ........................................................................ 15
Solving Common Problems ............................................................................ 16
Technical Specifications ................................................................................. 17
METHOD OF INSTALLATION .................................................................................... 18
E-3
CCCCAAAAUUUUTTTTIIIIOOOONN
NN
" The high inrush current of the starting compressor motor can have adverse effects to the operation of other equipment under unfavorable mains conditions. This equipment does not comply with the relevant technical standards for the limitation of voltage fluctuations and flicker." Before connecting this equipment to the power supply system, please report to your supply authority and obtain the consent. Do not connect other electric appliances to the same supply lines.
Air Conditioning Unit - Main Parts, Buttons and Display
Air inlet (inside)
Air filter
(The air filter is
located inside)
Inner air flow blades (right/left orientation)
Air outlet Outer air flow blades
(up/down orientation)
Air inlet (Outside)
Ventilation lever
Power Cable
Power cable connection should be committed to an installation engineer.
Fan speed indicators
(LOW, MED, HIGH)
Temperature/Timer
settings
Temperature adjustment
buttons
Operating mode indicators
(COOL, FAN)
Remote Control sensor
Air flow blade swing button
Fan speed adjustment
button
Air flow blade swing indicator Energy Saver indicator
Sleep timer setting button Timer indicator
Energy Saver button
ON/OFF button
Operating mode selection button
(COOL, FAN)
Timer setting button
The design and shape are subject to
change according to the model.
E-4
BLUE BROWN
YELLOW/GREEN
Main Power Earth
Remote Control - Buttons
Temperature adjustment buttons
Fan speed adjustment buttons
ON/OFF button
E-5
Timer setting button
Sleep timer setting button
Operating mode
selection buttons
Energy Saver button
Air flow blade swing button
Getting Started
You have just purchased a window-type room air conditioner and it has been installed by your installation specialist.
Your Owner’s Instructions contain valuable information on using your air conditioner. Please take the time to read them as they will help you take full advantage of the unit’s functions.
This Owner’s Instructions is just for using your air conditioner correctly. Thus, the illustrations shown in this manual may not exactly match your air conditioners.
The booklet is organized as follows.
The following figures are shown on pages 4 and 5:
- Air conditioning unit (main parts, buttons and display)
- Remote control (buttons)
They will help you find the buttons and understand the symbols displayed.
In the manual, you will find a series of step-by-step procedures for each function available.
The illustrations in the step-by-step procedures use four different symbols:
Moreover, applicable, wherever the illustrations show the positions of the buttons on both the remote control and the unit itself.
For the... The illustrations have a...
Remote control Gray background.
Example:
Unit itself White background.
Example:
PRESS PUSH IMPORTANT NOTE
E-6
Loading...
+ 14 hidden pages