SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION AND SPECIFICATIONS WITHOUT NOTICE.
Products and specifications discussed herein are for reference purposes only. All information discussed herein is provided on an "AS IS" basis, without warranties of any kind. This
document and all information discussed herein remain the sole and exclusive property of Samsung Electronics. No license of any patent, copyright, mask work, trademark or any other
intellectual property right is granted by one party to the other party under this document, by implication, estoppel or other-wise. Samsung products are not intended for use in life
support, critical care, medical, safety equipment, or similar applications where product failure could result in loss of life or personal or physical harm, or any military or defense
application, or any governmental procurement to which special terms or provisions may apply. For updates or additional information about Samsung products, contact your nearest
Samsung office. All brand names, trademarks and registered trademarks belong to their respective owners.
Samsung’s ARTIK 5 Module is a highly-integrated Systemin-Module that utilizes the Exynos architecture with dual core
ARM Cortex-A7 processor packaged DRAM and Flash
memories, a Secure Element and a wide range of wireless
communication options such as 802.11a/b/g/n, Bluetooth
4.1, Bluetooth Low Energy (BLE), and 802.15.4/ZigBee
communications all into a 30x25mm footprint. The many
standard digital control interfaces support external sensors
and higher performance peripherals to expand the module
capabilities. With the combination of Wi-Fi and ZigBee, the
ARTIK 5 is the perfect choice for home automation and
home hub devices, while also supporting a rich UI/UX
capability with the camera and display options. The
hardware based Secure Element works with the ARM®
TrustZone® and Trustonic’s Trusted Execution Environment
(TEE) to provide “bank level” security end-to-end.
ARTIK 5 Module Block Diagram
Dual core Cortex-A7@1.0GHz
Mali-400MP2 core including
scalers and JPEG accelerator
1x 2-Lane MIPI CSI up to
3MP@30fps
2-Lane MIPI DSI up to qHD
960x540@24bpp
1-channel PCM and 1-channel
24-bit I2S audio interface
Secure point to point
authentication and data
transfer
Trusted Execution Environment
IEEE 802.11a/b/g/n standard
compliant
Provides all power of the
ARTIK 5 module using on
board bucks and LDO’s
GPIO, I2C, SPI, UART, SDIO,
USB 2.0, JTAG, Analog Input
ARTIK 5 MODULE
RADIO
MEDIA
SECURITY
PROCESSOR
POWER MGT. MEMORY
INTERFACES
Samsung Semiconductor, Inc. ARTIK 5 Product Brief
Dual core Cortex A7@1.0GHz
32KB I$ and 32KB D$ per core
1-channel, 2-lane MIPI CSI@qHD
1-channel, 2-lane MIPI DSI@qHD
External Peripherals
2xSPI, 2xUART (4-pin), 1xUART
(2-pin)
2-channel ADC
100xGPIO (multiplexed)
MALI-400 graphics accelerator
1-channel SD/SDIO eMMC5.0
ARTIK 5 Module Exynos Sub System
ARTIK 5 MODULE SECURITY FEATURES
Samsung considers world class security as one of
the most important requirements when adding IoT
nodes into the cloud. As such Samsung build its IoT
ARTIK product family with a security architecture in
mind. To assure a secure environment for all IoT
nodes, the ARTIK family has dedicated security
hardware and software components in place.
Every ARTIK 5 module has the ability to authenticate
its boot image using a secure hash and execute a
secure boot once the boot image has been
authenticated. Secure communication and key
management is facilitated by the Secure Element as
part of any ARTIK 5 module. Finally secure execution
can be performed in Trustonic’s Trusted Execution
Environment (TEE) using ARM® TrustZone®.
The ARTIK 5 software stack as described facilitates
total security starting from authenticated adoption of
an ARTIK 5 IoT node into the cloud to secure
communication and remote software updates.
ARTIK 5 Module Software Stack
Samsung’s commitment to security gives developers the ability to create secure user experiences using the ARTIK
5 platform.
EXYNOS
Display/Camera
CAMERA ISP
12MP @ 18fps
LCD DSI @ qHD
CAMERA CSI @ qHD
High Speed I/F
USB 2.0
SD/SDIO/
eMMC5.0
2-ch
DMC
SRAM/NOR/ROM
Multi Media
Cortex-A7 Dual
External Peripherals
CPU 0
1.0GHz
32kB/32kB
CPU 1
1.0GHz
32kB/32kB
SCU
1MB L2 Cache
MFC
Codec
Mali-400 Series
JPEG Codec
LPDDR2-S4 533MHz
LPDDR3 @ 667MHz
DDR3
I2C
SPI
ADC
UART
GPIO
I2S/PCM
Secure
256KB SRAM
Secure
64KB ROM
CCI
Low Power Multi-Layer AXI/AHB Bus
IoT FRAMEWORK
NETWORK PROTOCOLS
COAP
MQTT
mDNS M2M
TLS/DTLS SSL
DATABASES
MARIA
INFLUX
SECURITY
SECURE BOOT
SELINUX
TZ MONITOR
TEE CRYPTO
TZW
CRYPTO LIBRARY
S-SAFE
TOSS
IoT SECURITY/SECURE PAIRING/DOMAIN
MANAGEMENT
POWER MANAGER
SUSPEND
TO RAM
RUNTIME
PM
CPU IDLE
ASV
CPU
FREQUENCY
THROTTLING
MANAGER
DEV
FREQUENCY
CLOCK
MANAGER
ARTIK 10 MODULE
APP FRAMEWORK API
APP-1 APP-2 APP-N
CAMERA
CAMERA IF
ISP
MULTIMEDIA/GRAPHICS
3D MFC
JPEG SCALER
HDMI
BSP STACK
BOOT INT
RTC DMA
SYSTEM
TIMER
WATCH
DOG
ADC
KEYPAD
GPIO
PWM
UART
SPI
I2C TOUCH PMIC SD MMC
SDIO
Wi-Fi
BT BLE
Z-WAVE
USBZIGBEE
CAMERA
HAL
HDMI
openHAB uSAMI PIXEOM FILE SYSTEM
ARTIK 5 MODULE ORDERING INFORMATION
For more information, please contact a sales representative in your area or email customer@artik.io.