Samsung ATIV Smart PC Pro 5 User Manual

BN68-01409L-00

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

Customer Care Centre

Web Site

AUSTRIA 0800-SAMSUNG (726-7864) www.samsung.com/at BELGIUM 02 201 2418 www.samsung.com/be

CZECH REPUBLIC

800-726-786 (800 - SAMSUNG) www.samsung.com/cz

Distributor pro Českou republiku: Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8

DENMARK 70 70 19 70 www.samsung.com/dk EIRE 0818 717 100 www.samsung.com/ie

FINLAND 030-6227 515 www.samsung.com/

FRANCE

3260 SAMSUNG (€ 0,15/Min) 08 25 08 65 65 (€ 0,15/Min)

www.samsung.com/fr

GERMANY 01805 - SAMSUNG (726-7864) (€ 0,14/Min) www.samsung.de HUNGARY 06-80-SAMSUNG (726-7864) www.samsung.com/hu ITALIA 800-SAMSUNG (726-7864) www.samsung.com/it LUXEMBURG 02 261 03 710 www.samsung.com/lu NETHERLANDS 0900-SAMSUNG (726-7864) (€ 0,10/Min) www.samsung.com/nl

NORWAY 815-56 480 www.samsung.com/no

POLAND

0 801 801 881

022-607-93-33

www.samsung.com/pl

PORTUGAL 80820-SAMSUNG (726-7864) www.samsung.com/pt SLOVAKIA 0800-SAMSUNG (726-7864) www.samsung.com/sk

SPAIN 902-1-SAMSU(72678) www.samsung.com/es

SWEDEN 0771-400 200 www.samsung.com/se SWITZERLAND 0800-SAMSUNG (726-7864) www.samsung.com/ch

U.K 0845 SAMSUNG (7267864) www.samsung.com/uk TURKEY 444 77 11 www.samsung.com/tr

ESTONIA 800-7267 www.samsung.ee LATVIA 8000-7267 www.samsung.com/lv

LITHUANIA 8-800-77777 www.samsung.lt KAZAHSTAN 8-10-800-500-55-500 www.samsung.com/kz_ru KYRGYZSTAN 00-800-500-55-500 RUSSIA 8-800-555-55-55 www.samsung.ru TADJIKISTAN 8-10-800-500-55-500 UKRAINE 8-800-502-0000 www.samsung.ua UZBEKISTAN 8-10-800-500-55-500 www.samsung.com/kz_ru

LCD TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/global/register

Model Serial No.

BN68-01409L-00L05-Cover.indd 1 2008-08-14 �� 9:44:04

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen

Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left,

right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.

Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

•

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. (See back cover for more informations.)

Connecting and Preparing Your TV

List of Parts ........................................................................2

Installing the Stand ............................................................2

Installing the Wall Mount Kit ..............................................2

Viewing the Control Panel .................................................3

Viewing the Connection Panel ...........................................4

Remote Control .................................................................7

Installing Batteries in the Remote Control .........................8

Switching On and Off .........................................................8

Placing Your Television in Standby Mode ..........................8

Viewing the Menus ............................................................9

Using the TOOLS Button ...................................................9

Plug & Play Feature ...........................................................9

Channel Control

Setting the Country ..........................................................11

Storing Channels Automatically .......................................11

Storing Channels Manually ..............................................13

Viewing the EPG (Electronic Programme Guide)

Information .......................................................................15

Setting the Default Guide ................................................16

Managing Channels .........................................................17

Setting the Channel Mode ...............................................25

Fine Tuning Analogue Channels ......................................25

Checking the Digital-Signal Information ..........................26

LNA (Low Noise Amplier) ...............................................26

Picture Control

Changing the Picture Standard .......................................27

Customizing the Picture Settings .....................................27

Adjusting the Detailed Settings ........................................28

Conguring Picture Options .............................................29

Resetting the Picture Settings to the Factory Defaults ....31

Viewing Picture-in-Picture ...............................................32

Sound Control

Changing the Sound Standard ........................................33

Selecting the Sound Mode ..............................................35

Connecting Headphones (Sold separately) .....................35

Time Setting

Setting the Clock .............................................................36

Setting the Sleep Timer ...................................................37

Switching the Television On and Off Automatically ..........38

■

Function Description

Selecting a Menu Language ............................................39

Activating the Child Lock .................................................39

Setting Up Your Personal ID Number (PIN) .....................40

Setting up the Parental Lock ...........................................41

Setting the Subtitle ..........................................................42

Selecting a Teletext Language ........................................42

Selecting a Preference Language ...................................43

Setting the Light Effect (depending on the model) ..........43

Melody/Entertainment/Energy Saving .............................44

Upgrading the Software ...................................................45

Viewing Common Interface .............................................46

Selecting the CI (Common Interface) Menu ....................46

To Select the Source .......................................................47

To Edit the Input Source Name ........................................47

PC Display

Using Your TV as a Computer (PC) Display ....................48

Display Modes .................................................................48

Setting up the TV with your PC .......................................49

WISELINK

Using the WISELINK Function ........................................50

Using the Photo List ........................................................51

Sorting Photo List ............................................................53

Viewing a Photo or Slide Show ......................................57

Using the Music List ........................................................61

Sorting Music List ............................................................62

Playing a Music File .........................................................66

Using the Setup Menu .....................................................68

About Anynet

What is Anynet+?.............................................................69

Connecting Anynet+ Devices...........................................69

Setting Up Anynet

+ ..........................................................70

Scanning and Switching between Anynet+ Devices ........70

Recording ........................................................................71

Listening through a Receiver (Home theater) ..................72

Troubleshooting for Anynet+ ...........................................72

Recommendations for Use

Teletext Feature ...............................................................73

Auto Wall-Mount Adjustment (Sold separately) ..............74

Using the Anti-Theft Kensington Lock (depending on the

model) ..............................................................................76

Securing the TV to the Wall .............................................77

Troubleshooting: Before Contacting Service Personnel ..78

Specications ..................................................................79

■

English - 1

English

Contents

Symbol Press Note One-Touch Button

English - 2

List of Parts

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

Remote Control &

Batteries (AAA x 2)

Power Cord Cover-Bottom

Stand Screw

X 4

Stand Cleaning Cloth

Owner’s Instructions

•

Warranty card

•

Safety Guide

•

Warranty card / Safety Guide (Not available in all locations) The stand and stand screw may not be included depending on the model.

➣

Connecting and Preparing Your TV

Installing the Stand

1. Connect your LCD TV and the stand. Two or more people should carry the TV. Make sure to distinguish between the front and back of the stand when assembling them.

2. Fasten two screws at position 1 and then fasten two screw at position 2. Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to

one side. The stand is installed for models with the screen size of 37 inch and above.

➣

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions

provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket.

Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.

Do not install your Wall Mount Kit while your TV is turned on. It may

result in personal injury due to electric shock.

Remove the stand and cover the bottom hole with a cap and fasten with two screws.

➣

M4xL 16

English - 3

Viewing the Control Panel

8 8

5 6

The product colour and shape may vary depending on the model.

➣

Front Panel buttons

Touch each button to operate.

SOURCE

Toggles between all the available input sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2, HDMI3, DTV). In the on-screen menu, use this button as you use the ENTER button on the remote control.

Press to see an on-screen menu of your TV’s features.

– +

Press to decrease or increase the volume. In the onscreen menu, use the –

+ buttons as you use the

◄ and ► buttons on the remote control.

C/P.

Press to change channels. In the on-screen menu, use the C/P. buttons as you use the ▼ and ▲ buttons on the remote control. (Without the Remote Control, you can turn on the TV by using the Channel buttons.)

Power Indicator

Blinks and turns off when the power is on and lights up in stand-by mode.

(Power)

Press to turn the TV on and off.

Remote Control Sensor

Aim the remote control towards this spot on the TV.

Speakers

Side Panel buttons

English - 4

Viewing the Connection Panel

Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable.

PC IN [PC] / [AUDIO]

Connect to the video and audio output jack on your PC.

COMPONENT IN

- Connect component video cables (optional) to component connector (“P

R”, “PB”, “Y”) on the rear of your set and the

other ends to corresponding component video out connectors on the DTV or DVD.

- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector (“P

R”, “PB”, “Y”) on your set.

- The P

R, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y,

Cb and Cr.

- Connect RCA audio cables (optional) to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD.

HDMI IN 1, HDMI IN 2, HDMI IN 3

- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)

- No additional Audio connection is needed for an HDMI to HDMI connection.

- When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.

➣

0!@#

[Side Panel Jacks]

The product colour and shape may vary depending on the model.

➣

Power Input

English - 5

What is HDMI?

- “High Denition Multimedia interface” allows the transmission of high denition digital video data and multiple channels

of digital audio.

- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in siz

e, has the HDCP (High Bandwidth

Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.

The TV may not output sound and pictures may be displayed with abnormal colour when DVD players/Cable Boxes/ Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the back of the TV. If this happens, contact the company that provided the DVD player/Cable

Box/Satellite receiver to conrm the HDMI version, then request a rmware update. HDMI cables that are not 1.3 may cause annoying icker or no screen display.

DVI IN(HDMI

) [R-AUDIO-L]

- DVI audio outputs for external devices.

Supported modes for HDMI/DVI and Component.

480i 480p 576i 576p 720p 1080i 1080p HDMI/DVI 50Hz X X X O O O O HDMI/DVI 60Hz X O X X O O O

Component O O O O O O O

ANT IN

To view television channels correctly, a signal must be received by the set from one of the following sources:

- An outdoor aerial / A cable television network / A satellite network

SERVICE

- Connector for SERVICE only.

- Connect this to the jack on the optional wall mount bracket. This will allow y

ou to adjust the TV viewing angle using

your remote control.

COMMON INTERFACE Slot

- When not inserting “CI CARD” in some channels, “Scrambled Signal” is displayed on the screen.

- The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your serv

ice provider.

- When the channel information conguration has nished, the message “Updating Completed” is displayed, indicating

that the channel list is now updated.

You must obtain a CI CARD from a local cable service provider

. Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it.

Insert the CI-Card in the direction marked on it. The place of the COMMON INTERFACE Slot may be different depending on its

model.

WISELINK

Connect a USB mass storage device to view photo les (JPEG) and play audio les (MP3).

S-VIDEO or VIDEO / R-AUDIO-L

- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

- Connect RCA audio cables to “R-AUDIO-L” on your set and the other ends to

corresponding audio out connectors on

the A/V device.

HEADPHONES JACK

Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from the built-in speakers will be disabled.

AUDIO OUT [R-AUDIO-L]

Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to corresponding

audio in connectors on the Amplier or DVD Home Theatre.

➣

English - 6

DIGITAL AUDIO OUT (OPTICAL)

- Connects a set of external headphones for private listening. When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV outputs 2 channel

audio only. If you want to hear 5.1 channel audio, connect the Optical jack on the DVD player or Cable/Satellite Box

directly to an Amplier or Home Theater, not the TV.

EXT 1, EXT 2

Connector

Input Output

Video Audio (L/R) RGB Video + Audio (L/R) EXT 1 O O O Only TV or DTV output is available. EXT 2 O O Output you can choose.

- Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

KENSINGTON LOCK (depending on the model)

- The Kensington Lock (optional) is a device used to physically x the system when used in a public place.

- If you want to use a locking device, contact the dealer where you purchased the TV.

- The location of the Kensington Lock may be different depending on its model.

➣

English - 7

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV.

Television Standby button.

Selects the TV mode

directly.

Number buttons for direct

channel access

One/Two-digit channel

selection

+: Volume increase

-: Volume decrease

Temporary sound switch-

off

Electronic Program Guide

(EPG) display

Use to quickly select

frequently used functions.

Use to see information on

the current broadcast

Colour buttons: Use these

buttons in the Channel list and WISELINK, etc.

Press to select the optional

display and sound modes for sports, cinema and games.

Use these buttons in the

DMA, WISELINK and Anynet+. ( : This remote can be used to control recording on Samsung recorders with the Anynet+ feature)

Available source selection

Previous channel

P : Next channel

P : Previous channel

Displays the main on-

screen menu

This function enables you

to view and play photo

and music les from an

external device.

(

Returns to the previous

)

Control the cursor in the

Exit the on-screen menu

Use this when connecting

a SAMSUNG DMA (Digital Media Adapter) device through an HDMI interface and switching to DMA mode. (The DMA button is optional.) For more information on the operating procedures, refer to the user manual of the DMA. This button is available when “Anynet+(HDMI-CEC)” is “On” (see page 70)

Picture size selection

Digital subtitle display

It display “Channel List” on

the screen.

Teletext Functions

Exit from the teletext

display

Teletext store

Teletext size selection

Teletext reveal

Fastext topic selection

Alternately select Teletext,

Double, or Mix.

Teletext mode selection

(LIST/FLOF)

Teletext sub page

P : Teletext next page

: Teletext previous

page

Teletext index

(

Teletext hold

Teletext cancel

The performance of the remote control may be affected by bright light.

➣

English - 8

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the gure.

2. Install two AAA size batteries.

Make sure to match the “+” and “–” ends of the batteries with the diagram insid

e the

compartment.

3. Replace the cover

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.

If the remote control doesn’t work, check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage or is the power cord unplugged?

5. Is there a special uorescent light or neon sign nearby?

➣

Switching On and Off

The mains lead is attached to the rear of your set.

1. Plug the mains lead into an appropriate socket. The standby indicator lights up on your set.

2. Press the

button on your set.

You also can press the POWER

button or the TV/DTV button on the remote control to turn the TV on.

The programme that you were watching last is reselected automatically.

Press the numeric button (0~9) or channel up/down (

/ ) button on the remote control or C/P. button on

your set.

When you switch the set on for the very rst time, you will be asked to choose language in which the menus are to

be displayed.

To switch your set off, press the POWER

button again.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1. Press the POWER

button on the remote control.

The screen is turned off and a red standby indicator appears on your set.

To switch your set back on, simply press the POWER

, numeric buttons (0~9), TV/DTV button or channel up/down

( / ) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial.

➣

English - 9

Viewing the Menus

1. With the power on, press the MENU button.

The main menu appears on the screen. The menu’s left side has icons: Picture, Sound, Channel, Setup, Input, Application.

2. Press the ▲ or ▼ button to select one of the icons.

Then press the ENTER

button to access the icon’s sub-menu.

3. Press the EXIT

button to exit.

The on-screen menus disappear from the screen after about one minute.

➣

Using the TOOLS Button

You can use the TOOLS button to select your frequently used functions quickly and easily. The “Tools” menu changes depending on which external input mode you are viewing.

1. Press the T

OOLS button.

The “Tools” menu will appear.

2. Press the ▲ or ▼ button to select a menu.

Press the ▲/▼/◄/►/ENTER

buttons to display, change, or use the selected items. For a more detailed description of each function, refer to the corresponding page.

Anynet+ (HDMI-CEC): see page 70 Picture Size: see page 29 Picture Mode: see page 27 Sound Mode: see page 33 Sleep Timer: see page 37 SRS TS XT: see page 33 Energy Saving: see page 44 Dual l ll: see page 35 PIP: see page 32 Auto Adjustment: see page 49

•

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently.

1. Press the POWER

button on the remote control. The message “Valitse calikkokieli, myymälädemo, kanavat ja kellonaika.” is displayed.

2. Press the ENTER

button, then “Select the OSD Language” menu is

automatically displayed. Press the ENTER button.

3. Select the appropriate language by pressing the ▲ or ▼ button. Press the

ENTER

button to conrm your choice.

Mode

Standard

Backlight : 7 Contrast : 95 Brightness : 45 Sharpness : 50 Colour : 50

Tint (G/R) : G50/R50

Detailed Settings

Picture

Tools

Anynet+ (HDMI-CEC) Picture Size : Auto Wide Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual l ll : Mono

Exit

EnterMove

Plug & Play

Valitse calikkokieli, myymälädemo, kanavat ja kellonaika.

Hyväksy

Plug & Play

Select the OSD Language

Menu Language : English ►

Hyväksy

English - 10

4. Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the

ENTER button.

We recommend setting the TV to “Home Use” mode for the best picture in your home environment.

“Store Demo” mode is only intended for use in retail environments. If the unit is accidentally set to “Store Demo” mode and you want to return

to “Home Use” (Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

5. Press the ENTER

button. Select the appropriate country by pressing the

▲ or ▼ button. Press the ENTER button to conrm your choice.

6. Press the ▲ or ▼ button to select the channel source to memorize. Press

the

ENTER button to select “Start”. The settings differ according to the

selected country. For nore details, refer to pages 11~14.

Digital & Analogue: “Digital” and “Analogue” channels. Digital: “Digital” channels. Analogue: “Analogue” channels.

The channel search will start and end automatically. Press the ENTER

button at any time to interrupt the memorization

process. After all the available channels are stored, the message “Set the Clock

Mode.” is displayed.

7. Press the ENTER

button to select the “Clock Mode”.

Press the ▲ or ▼ button to select “Manual”, then Press the ENTER button.

If you select “Auto”, The message “Enjoy your viewing” is displayed. If you have received a digital signal, the time will be set automatically.

8. Select the “Day”, “Month”, “Year”, “Hour”, or “Minute” by pressing the ◄ or ►

button. Set the “Day”, “Month”, “Y

ear”, “Hour”, or “Minute” by pressing the

▲ or ▼ button.

You can also set the “Month”, “Day”, “Year”, “Hour” and “Minute” by pressing the number buttons on the remote control.

9. The message “Enjoy your viewing” is displayed.

When you have nished, press the ENTER button.

If you want to reset this feature...

1. Press the MENU

button to display the menu.

Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.

2. Press the ENTER

button again to select “Plug & Play”.

3. Enter your 4 digit PIN number.

The default PIN number of a new TV set is

“0-0-0-0”.

If you want to change PIN number, refer to 40 page. For further details on setting up options, refer to the pages 9~10. The “Plug & Play” feature is only available in the TV mode.

➣

Plug & Play

Select ‘Home Use’ when installing this TV in your home.

Home Use

Store Demo

EnterMove

Plug & Play

Auto Store is completed.

Digital Channels : 45 Analogue Channels : 32

Skip

Enter

Plug & Play

If you enter PIN, ‘Plug & Play’ will be started. All channel settings and user preferences will be lost.

Return

0~9

Enter PIN

Plug & Play

Auto Store in progress.

Channel 69 Digital Channels: 29 Analogue Channels: 0

Stop

20%

Skip

Enter

Plug & Play

Set the Clock Mode.

Clock Mode : Auto

Auto

Manual

EnterMove Skip

Plug & Play

Enjoy your viewing

Setup

Plug & Play

  ►

Language : English Time Child Lock

: On Change PIN Parental Lock Subtitle

Teletext Language

: ----

Plug & Play

Day

Month

20 08

Year

Hour

Minute

Enter

Adjust

Move

Skip

Set current date and time

Plug & Play

Select the channel source to memorize.

Digital & Analogue Digital Analogue

Start

Skip

Enter

Move

Start Start

Plug & Play

Select Country.

Country : Finland ►

Enter

English - 11

Channel Control

Setting the Country

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.

2. Press the ▲ or ▼ button to select “Country”, then press the ENTER

button.

3. Press the ▲ or ▼ button to select “Analogue Channel” or “Digital Channel”,

then press the ENTER

button.

If a channel is locked using the “Child Lock” function, the PIN input window appears (refer to page 39). Enter your 4 digit PIN number.

Select the appropriate country by pressing the ▲ or ▼ button.

Press the ENTER

button to conrm your choice.

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.

1. Press the MENU

button to display the menu.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.

2. Press the ▲ or ▼ button to select “Auto Store”, then press the ENTER

button.

If a channel is locked using the “Child Lock” function, the PIN input window appears (refer to page 39). Enter your 4 digit PIN number.

Press the ▲ or ▼ button to select the channel source to memorize.

Digital & Analogue: “Digital” and “Analogue” channels. Digital: “Digital” channels. Analogue: “Analogue” channels.

Scans for all channels with active broadcast stations and stores them in the TV’s memory.

➣

Channel

Country

 ►

Auto Store Manual Store Full Guide Mini Guide Default

Guide

: Mini Guide Channel List Channel Mode : Added

Ch.

Channel

Country

Auto Store

 ►

Manual Store Full Guide Mini Guide Default

Guide

: Mini Guide Channel List Channel Mode : Added

Ch.

Fine Tune

Auto Store

Select the Antenna source to memorize.

Digital & Analogue Digital Analogue

Start

Enter

Move

Start Start

Return

Analogue

4. Press the ENTER

button to select “Start”.

If you want to stop Auto Store, press the ENTER

button.

The “Stop Auto Store?” message will be displayed. Select “Yes” by pressing the ◄or ►button, then press the ENTER button.

Digital & Analogue / Digital

4. The update procedures differ depending on the selected “Country”. Update the channel list by selecting an appropriate option.

When the “Country” was set to “Finland”

Press the ▲ or ▼ button to select “Auto”, “Cable” or “Aerial”. Press the

ENTER

button.

Press the ENTER button to select “Start”.

- Cable: Scans cable channels.

- Aerial: Scans aerial channels.

This product cannot scan both cable and aerial channels at the same time.

When it has nished, the number of scanned services will be displayed.

The existing favourite channel list will not be deleted when the channel list is updated.

When the “Country” was set to “Sweden”, or “Denmark”

Press the ▲ or ▼ button to select “Cable” or “Aerial”. Press the ENTER button.

When selecting “Cable”:

- Frequency: Displays the frequency for the channel. (Dif

fers in each

country)

- Modulation: Displays available modulation values.

- Symbol Rate: Displays available symbol rates.

Network ID: Displays the network identication code.

Press the red button to start the scan for digital services. When it has

nished, channels are updated in the channel list.

When selecting “Aerial”:

Press the

ENTER

button to select “Start”.

When the “Country” was set to “Norway”

Press the ENTER

button to select “Start”.

➣



➣



English - 12

Auto Store

14 3000k Hz

Frequency

QA M 64

Modulation

68 75 kS/ s

Symbol Rate

99 9

Network ID

Enter

Adjust

Move

Skip

Auto Store

Auto Store in progress.

Digital Channels: 29 154MHz Analogue Channels: 0

Stop

20%

Enter

Return

Auto Store

Select the Antenna source to memorize.

Cable Aerial

Start

Enter

Move

Start

Return

Auto Store

Auto Store in progress.

172MHz

Analogue Channels: 0

Stop

20%

Enter

Return

Storing Channels Manually

You can store television channels, including those received via cable networks. When storing channels manually, you can choose:

Whether or not to store each of the channels found. The programme number of each stored channel which you wish to identify.

Press the MENU

button to display the menu.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.

2. Press the ▲ or ▼ button to select “Manual Store”, then press the ENTER

button.

Digital Channel

3. Press the ▲ or ▼ button to select “Digital Channel”, then press the

ENTER

button.

If a channel is locked using the “Child Lock” function, the PIN input window appears (refer to page 39). Enter your 4 digit PIN number.

4. The update procedures differ depending on the selected “Country”. Update the channel list by selecting the appropriate option.

When the “Country” was set to “Finland”

Press the ▲ or ▼ button to select “Cable” or “Aerial”, then press the

ENTER

button.

When selecting “Cable”:

- Frequency: Displays the frequency for the channel. (Differs in each

country)

- Modulation: Displays available modulation values.

- Symbol Rate: Displays available symbol rates. Press the

ENTER

button to start the scan for digital services.

When it has nished, channels are updated in the channel list.

When selecting “Aerial”:

- Channel: Channel “21” to “69” in sequence are displayed (depending on the

country)

- Frequency: The frequency available in the Channel group is displayed.

- Bandwidth: The available bandwidths are 8 MHz. Press the

ENTER

button to start the scan for digital services.

When it has nished, channels are updated in the channel list.

When the “Country” was set to “Sweden”, “Denmark”, or “Norway”

- Channel: Channel “21” to “69” in sequence are displayed (depending on the

country)

Frequency: The frequency available in the Channel group is displayed.

- Bandwidth: The available bandwidths are 8 MHz. Press the

ENTER

button to start the scan for digital services.

When it has nished, channels are updated in the channel list.

5. When it has nished, the number of scanned services will be displayed.

Press the EXIT

button to exit.

•

➣



English - 13

Manual Store

Move

Adjust

ReturnSearch

17 7000k Hz

Frequency

QAM 16

Modulation

4000 kS/s

Symbol Rate

Channel

Country Auto Store

Manual Store  ►

Full Guide Mini Guide Default Guide

: Mini Guide Channel List Channel Mode : Added

Ch. Fine Tune

Signal Information

Manual Store

Move

Adjust

ReturnSearch

Channel

554000 KHz

Frequency

8MHz

Bandwidth

Manual Store

Move

Adjust

ReturnSearch

Channel

554000 KHz

Frequency

8MHz

Bandwidth

Manual Store

Select the Antenna source to memorize.

Cable Air

Start

Enter

Move

Start

Return

English - 14

Analogue Channel

3. Press the ▲ or ▼ button to select “Analogue Channel”, then press the

ENTER

button.

If a channel is locked using the “Child Lock” function, the PIN input window appears (refer to page 39).

4. Press the ◄ or ► button to select the required item below

Press the ▲ or ▼ button to adjust to the setting satised.

Press the EXIT button to exit.

Programme (Programme number to be assigned to a channel)

Press the ▲ or ▼ button until you nd the correct number.

You can also select the channel number directly by pressing the numeric buttons (0~9).

Colour System: Auto/PAL/SECAM/NTSC

4.43

Press the ▲ or ▼ button to select the required colour standard.

Sound System: BG/DK/I/L

Press the ▲ or ▼ button to select the required sound standard.

Channel (When you know the number of the channel to be stored)

Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel). Press the ► button, then press the ▲ or ▼ button to select the required

number.

You can also select the channel number directly by pressing the numeric buttons (0~9).

If there is abnormal sound or no sound, reselect the sound standard required.

Search (When you do not know the channel numbers)

Press the ▲ or ▼ button to start the search. The tuner scans the frequency range until the rst channel or the channel

that you selected is received on the screen.

Store (When you store the channel and associated programme number)

Set to OK by pressing the ENTER

button.

Channel mode

- P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to P99.

You

can select a channel by entering the position number in this mode.

- C (Air channel mode):

You can select a channel by entering the assigned

number to each air broadcasting station in this mode.

- S (Cable channel mode):

You can select a channel by entering the assigned

number for each cable channel in this mode.

➣



➣



➣



➣

Channel

Country Auto Store

ManualStore  ►

Full Guide Mini Guide Default Guide

: Mini Guide Channel List Channel Mode : Added

Ch. Fine Tune Signal Information

Digital Channel

Analogue Channel

Manual Store

Programme

Au to

Colour SystemBGSound System

Move

Adjust

Return

Channel

62 MHz

Store

English - 15

Viewing the EPG (Electronic Programme Guide) Information

The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information becomes available.

1. Press the MENU

button to display the menu.

2. Press the ▲ or ▼ button to select “Channel”, then press the ENTER

button.

3. Press the ▲ or ▼ button to select “Full Guide” or “Mini Guide” then press the

ENTER

button.

Mini Guide

The information of each program is displayed by each line on the current channel Mini Guide screen from the current program onwards according to the program starting time order.

Full Guide

Displays the programme information as time ordered One hour segments. Two hours of programme information is displayed which may be scrolled forwards or backwards in time.

To... Then...

Watch a programme in the EPG list

Select a programme by pressing the

▲, ▼, ◄, ► button.

Exit the guide Press the blue button

If the next program is selected, it is scheduled with the clock icon displayed. If the ENTER

button is pressed again, press the

◄, ► button to select Cancel Schedules, the scheduling is

canceled with the clock icon gone.

➣

View programme information

Select a programme of your choice by

pressing the ▲, ▼, ◄, ► button.

Then press the INFO button when the programme of your choice is highlighted.

The programme title is on the upper part of the screen center.

•

Please click on INFO button for the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality Information (HD/SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief summary of the highlighted programme are included on the detailed information. “...” will be appeared if the summary is long.

➣

Toggle between the “Mini Guide” or “Full Guide”

Press the red button repeatedly.

In Full Guide

Scrolls backwards quickly (24 hours).

Scrolls forwards quickly (24 hours).

•

Press the green button repeatedly.

Press the yellow button repeatedly.

•

In Mini Guide

Display next page quickly.

Display previous page quickly.

•

Press the green button.

Press the yellow button.

•

You can also display the guide menu simply by pressing the GUIDE button.

(To congure the “Default Guide”, refer to the descriptions on page 16.)



Channel

Auto Store Manual Store

Full Guide

Mini Guide Default Guide : Mini Guide Channel List Channel Mode

: Added Ch. Fine Tune

Signal Information

LNA : Off

Channel

Manual Store Full Guide

Mini Guide

Default Guide : Mini Guide Channel List Channel Mode

: Added Ch.

Fine Tune

Signal Information LNA : Off

Full Guide

DTV Cable 900 f tn 2:10 Tue 1 Jun

Freshmen On Campus 2:00 - 2:30

No Detailed Information

Today 2:00 - 3:00 3:00 - 4:00

Mint Extra Loaded Fresh 40 with Dynamite MC The Distillery Smash Hits! Sunday

900 f tn 901 ITV Play 902 Kerrang! 903 Kiss 903 oneword 903 Smash Hits!

▼

Street Hypn..

Kisstory No Information

No Information

Freshmen O..

Watch

Information



Mini Guide +24 Hours Exit

Mini Guide DTV Cable 900 f tn

Street Hypnosis Booze Britain

2:00 2:30 5:00

▼

Freshmen On Campus

Watch

Information



Full Guide Next Page Exit

English - 16

Setting the Default Guide

You can decide whether to display either the “Mini Guide” or the “Full Guide” when the GUIDE button on the remote control is pressed.

1. Press the MENU

button to display the menu.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.

2. Press the ▲ or ▼ button to select “Default Guide”, then press the ENTER

button.

3. Select “Mini Guide” or “Full Guide” using the ▲ or ▼ button, and press the

ENTER button.

4. Press the EXIT button to exit.

You can select these options by simply pressing the GUIDE button on the remote control.

Channel

Full Guide Mini Guide

Default Guide : Mini Guide ►

Channel List Channel Mode : Added Ch. Fine Tune

Signal Information

LNA : Off

Channel

Full Guide Mini Guide

DefaultGuide :MiniGuide ►

Channel List Channel Mode : Added Ch. Fine Tune Signal Information LNA : Off

Mini Guide

Full Guide

English - 17

Managing Channels

Using this menu, you can Add/Delete or set Favourite channels and use the program guide for digital broadcasts.

Viewing All Channels

Show all currently available channels.

To use the Channel List function, operate the “Auto Store” rst.

1. Press the MENU

button.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button.

2. Press the ◄ button to select “Added Channels”.

3. Press the ▲ or ▼ button to select “All Channels”.

Shows all currently available channels.

Press the ENTER

button.

4. Press the ▲ or ▼ button to select a channel to view, then press the

ENTER button. You can watch the selected channel.

Press the CH LIST button on the remote control to bring up the channel lists.

Using the Colour buttons on the Remote with the Channel List

Red (Channel Type): Toggle between your “TV”, “Radio”, “Data/Other” and

“All”.

Green (Zoom): Enlarges or shrinks a channel number. Yellow (Select): Selects multiple channel lists. TOOLS (Option): Displays the “Delete”(or “Add”), “Add to Favourite”(or

“Delete from Favourite”), “Lock”, “Timer Viewing”, “Edit Channel Name”, “Sort”, “Select All”, “Deselect All” or “Auto Store” menu. (The Options menus may differ depending on the situation.)

•

A gray-coloured channel indicates the channel has been deleted. The “Add” menu only appears for deleted channels.

A channel marked with the “♥” mark means the channel has been set as a Favourite. The “Delete from Favourite” menu only appears for channels with the “♥” mark.

➣

824 UKTV Gold 825 UKTV style

1 C --

2 C

A 3 ♥ C

A 4 C

A 5 C

A 6 C

A 7 C

A 8 C

All Channels

All



Channel Type Zoom Select

Option

Channel

Mini Guide Default Guide : Mini Guide

Channel List

Channel Mode : Added Ch. Fine Tune

Signal Information

LNA :

Off

824 UKTV Gold 825 UKTV style

1 C --

2 C

A 3 ♥ C

A 4 C

A 5 C

A 6 C

A 7 C

A 8 C

Added Channels

All



Channel Type Zoom Select

Option

English - 18

Erasing and Adding Channels

You can delete or add a channel to display the channels you want.

1. Press the MENU

button.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the

ENTER button.

2. Press the ◄ button to select “Added Channels”.

Press the ▲ or ▼ button to select “All Channels”.

Shows all currently available channels.

Press the ENTER

button.

4. Press the ▲ or ▼ button to select a channel to delete, then press the

TOOLS button.

Press the ENTER

button to select “Delete”.

All deleted channels will be shown on “All Channels” menu.

6. Press the EXIT button to exit.

You can also delete a channel to the “Added Channels” menu in the same manner.

To Add (Restore) a channel back to the Added Channel List, follow steps

1-3 above, press the ▲ or ▼ button to select a channel to add, the press

the TOOLS button. Press the ENTER

button to select Add.

Press the CH LIST button on the remote control to bring up the channel lists.

➣

Setting Your Favourite Channels

You can set channels you watch frequently as favourites.

1. Press the MENU

button.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the

ENTER button.

2. Press the ◄ button to select “Added Channels”.

Press the ▲ or ▼ button to select “All Channels”.

Shows all currently available channels.

Press the ENTER

button.

4. Press the ▲ or ▼ button to select a channel as a favourite channel.

Adding multiple channels to Favourites

Press the ▲ or ▼ button to select the desired channel in the channel

list.

Then press the yellow button. Repeat the above operation to select

multiple channels. The

mark appears to the left of the selected

channels.

5. Press the TOOLS button.

Press the ▲ or ▼ button to select “Add to Favourite”, then press the

ENTER

button. The “♥” symbol will be displayed and the channel will be

set as a favourite.

7. To cancel your favourite channel selection, press the T

OOLS button when a

favourite channel is selected.

Press the ▲ or ▼ button to select “Delete from Favourite”, then press the

ENTER

button.

The channel is deleted from “Favourites” and the “♥” mark also disappears.

Press the

EXIT button to exit.

You can also Add or Delete a channel from Favourites in the “Added Channels” menu in the same manner.

All favourite channels will be shown on “Favourite” menu.

Press the CH LIST button on the remote control to bring up the channel lists.

➣

Channel

Mini Guide Default Guide : Mini Guide

Channel List

Channel Mode : Added Ch. Fine Tune

Signal Information

LNA :

Off

Channel

Mini Guide Default Guide : Mini Guide

Channel List

Channel Mode : Added Ch. Fine Tune

Signal Information

LNA :

Off

824 UKTV Gold 825 UKTV style

1 C --

2 C

A 3 C

A 4 C

A 5 C

A 6 C

A 7 C

A 8 C

All Channels

All



Channel Type Zoom Select

Option

Delete Add to Favourite Lock Timer Viewing Edit Channel Name Sort

▼

824 UKTV Gold 825 UKTV style

1 C --

2 C

A 3 ♥ C

A 4 C

A 5 C

A 6 C

A 7 C

A 8 C

All Channels

All



Channel Type Zoom Select

Option

Delete Add to Favourite Lock Timer Viewing Edit Channel Name Sort

▼

English - 19

Locking and Unlocking Channels

This function is available only when the “Child Lock” is set to “on”. (see page 39)

1. Press the MENU

button.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button.

2. Press the ◄ button to select “Added Channels”.

Press the ▲ or ▼ button to select “All Channels”.

Shows all currently available channels.

Press the ENTER

button.

When the “Country” was set to “Sweden”, or “Denmark”

Locking channels

4. Press the ▲ or ▼ button to select the channels you want to lock, then

press the T

OOLS button.

5. Press the ▲ or ▼ button to select “Lock”, then press the ENTER

button.

6. Enter your 4 digit PIN number. The “

” symbol will be displayed and the channel will be locked. The default PIN number of a new TV set is “0-0-0-0”. If you want to change PIN number, refer to 40 page.

Press the EXIT button to exit.

Unlocking channels

4. Press the ▲ or ▼ button to select the channels you want to Unlock, then

press the T

OOLS button.

5. Press the ▲ or ▼ button to select “Unlock”, then press the ENTER

button.

6. Enter your 4 digit PIN number. The channel is unlocked and the “

” mark also disappears. The default PIN number of a new TV set is “0-0-0-0”. If you want to change PIN number, refer to 40 page.

Press the EXIT button to exit.

➣



➣

Channel

Mini Guide Default Guide : Mini Guide

Channel List

Channel Mode : Added Ch. Fine Tune

Signal Information

LNA :

Off

824 UKTV Gold 825 UKTV style

1 C --

2 C

A 3 C

A 4 C

A 5 C

A 6 C

A 7 C

A 8 C

All Channels

All



Channel Type Zoom Select

Option

Delete Add to Favourite Lock Timer Viewing Edit Channel Name Sort

▼

824 UKTV Gold 825 UKTV style

1 C --

2 C

A 3 C

A 4 C

A 5 C

A 6 C

A 7 C

A 8 C

All Channels

All



Channel Type Zoom Select

Option

Delete Add to Favourite Unlock Timer Viewing Edit Channel Name Sort

▼

English - 20

When the “Country” was set to “Norway”

Locking channels

4. Press the ▲ or ▼ button to select the channels you want to lock, then

press the T

OOLS button.

5. Press the ▲ or ▼ button to select “Child Lock Setting”, then press the

ENTER

button.

6. Press the ▲ or ▼ button to select “User” or “Always”, then press the

ENTER

button.

User: Locks the channel with the “Child Lock” function for the user-

congured period of time only. Select “User” and set the required time using the ▲, ▼, or the number buttons.

Always: Locks the channel all the time with the “Child Lock” function.

•

7. Press the EXIT button to exit.

Unlocking channels

4. Press the ▲ or ▼ button to select the channels you want to Unlock, then

press the T

OOLS button.

5. Press the ▲ or ▼ button to select “Child Lock Setting”, then press the

ENTER

button.

6. Enter your 4 digit PIN number. The channel is unlocked and the “

” mark also disappears. The default PIN number of a new TV set is “0-0-0-0”. If you want to change PIN number, refer to 40 page.

Press the ▲ or ▼ button to select “Off”, then press the ENTER button.

8. Press the EXIT

button to exit.



➣

824 UKTV Gold 825 UKTV style

1 C --

2 C

A 3 C

A 4 C

A 5 C

A 6 C

A 7 C

A 8 C

All Channels

All



Channel Type Zoom Select

Option

Delete Add to Favourite Child Lock Setting Timer Viewing Edit Channel Name Sort

▼

Child Lock Setting

Mode : User

00 00

On Time Off Time

0000

ReturnEnter

Adjust

Move

English - 21

Reserving a Program (Timer Viewing)

If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel

List; even when you are watching another channel. To reserve a program, set the current time rst. See pages 36~37.

Press the MENU

button.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button.

2. Press the ▲ or ▼ button to select a channel, then press the T

OOLS button.

3. Press the ▲ or ▼ button to select “Timer V

iewing”, then press the

ENTER button. The Reserve a Program (Timer Viewing) screen appears.

4. Press the ▲/▼/◄/► buttons to reserve a program and then press the

ENTER

button. Reserving a program has been completed.

Press the EXIT button to exit.

You can also reserve a program in the “All Channels” or “Favourite” menus using the same procedures.

For information on how to conrm a viewing reservation, refer to page 22. Only memorized channels can be reserved.

You can set the channel, month, day, year, hour and minute directly by pressing the number buttons on the remote control.

Press the CH LIST button on the remote control to bring up the channel lists.

Digital Program Guide and Viewing Reservation

When a digital channel is selected, and you press the ► button, the Program

Guide for the channel appears. You can reserve a program according to the procedures described above.

: A program currently being broadcast. : A reserved program

➣

Timer Viewing

DT V

Antenna

80 0

Channel

On ce

01 - 01 - 200 8

Date

ReturnEnter

Adjust

Move

10 :00

Start Time

Repeat

Channel

Mini Guide Default Guide : Mini Guide

Channel List

Channel Mode : Added Ch. Fine Tune

Signal Information

LNA :

Off

1/1/2008

1:59 LA ROSE DES ....

2:59 WS MUSIC

3:21

Gralness de stars

824 825

908

2 C

3 ♥ C

4 C

5 C

6 C

7 C

8 C

All



Channel Type Zoom

Option Watch

Added Channels

All



Channel Type Zoom Select

Option

824 UKTV Gold 825 UKTV style

1 C --

2 C

A 3 ♥ C

A 4 C

A 5 C

A 6 C

A 7 C

A 8 C

Added Channels

Delete Add to Favourite Lock Timer Viewing Edit Channel Name Sort

▼

English - 22

ConrmingaViewingReservation

You can view, modify or delete a reservation.

1. Press the MENU

button.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the

ENTER button.

2. Press the ◄ button to select “Added Channels”.

3. Press the ▲ or ▼ button to select “Programmed”.

Shows all current reserved programs.

Press the ENTER

button.

Modifying a viewing reservation

To select a reservation item to be modied, press the ▲ or ▼ button and

then press the

TOOLS button.

5. Press the ENTER

button to select “Change Info”.

6. Press the ▲/▼/◄/► buttons to change a reservation setting and then

press the ENTER

button. The reservation modication is applied.

Canceling a reservation

4. To select a reservation item to be canceled, press the ▲ or ▼ button, and

then press the

TOOLS button.

5. Press the ▲ or ▼ button to select “Cancel Schedules”, then press the

ENTER

button.

6. Press the ◄ or ► button to select “OK”, then press the ENTER

button.

The viewing reservation has been canceled.

Press the EXIT button to exit.

Programmed Option

Change Info: Select to change a viewing reservation. Cancel Schedules: Select to cancel a viewing reservation. Information: Select to view a viewing reservation. Select All: Select all reserved programs.

•

Press the CH LIST button on the remote control to bring up the channel lists.

➣

Programmed

1/1/2008

13:59 5 TV1 Quincy, M.E

18:59 2 TV3 The Equalizer 20:59 2 TV3 McMillan & Wife 21:59 2 TV3 M.Spillane’s mike Hammer

All



Channel Type Zoom Select

Option Information

Channel

Mini Guide Default Guide : Mini Guide

Channel List

Channel Mode : Added Ch. Fine Tune

Signal Information

LNA :

Off

Programmed

1/1/2008

13:59 5 TV1 Quincy, M.E

18:59 2 TV3 The Equalizer 20:59 2 TV3 McMillan & Wife 21:59 2 TV3 M.Spillane’s mike Hammer

Change Info

Cancel Schedules Information Select All

All



Channel Type Zoom Select

Option Information

English - 23

Edit Channel Name-Analogue

Channels can labeled so that their call letters appear whenever the channel is selected.

1. Press the MENU

button.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button.

2. Press the ▲ or ▼ button to select the channel to be assigned a new name,

then press the TOOLS button.

3. Press the ▲ or ▼ button to select “Edit Channel Name”, then press the

ENTER

button.

4. Press the ▲/▼/◄/► button to select a letter, then press the

ENTER

button.

Numeric buttons: You can enter numbers. Red button: You can switch between English and Characters. Green button: You can delete an already entered character. Yellow button: You can enter a blank space. Blue button: You can nish renaming a channel.

•

5. When you have nished, press the blue button to assign the new name.

Press the EXIT button to exit.

The names of digital broadcasting channels are automatically assigned and cannot be labelled.

➣

Sorting the Stored Channels-Analogue

This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store.

1. Press the MENU

button.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button.

2. Press the ▲ or ▼ button to select a channel, then press the T

OOLS button.

3. Press the ▲ or ▼ button to select “Sort”, then press the ENTER

button.

4. Press the ▲ or ▼ button to move to the position in which you would like to

change and then press the ENTER

button.

5. Repeat steps 2 to 4 for another channel to be sorted.

Press the EXIT

button to exit.

Channel

Mini Guide Default Guide : Mini Guide

Channel List

Channel Mode : Added Ch. Fine Tune

Signal Information

LNA :

Off

Sort

802 abc1 803 BBC Radio 1 804 BBC Radio 2 805 BBC Radio 3 806 BBC Radio 4 807 BBC World

▼

ReturnEnter

Move

Channel

Mini Guide Default Guide : Mini Guide

Channel List

Channel Mode : Added Ch. Fine Tune

Signal Information

LNA :

Off

803

Number

Character

Delete

Blank

Done

0~9

B C D E F G

I J K L M NH P Q R S T UO

W X Y ZV

Enter ReturnMove

Edit Channel Name

0~9



All



Channel Type Zoom Select

Option

824 UKTV Gold 825 UKTV style

1 C --

2 C

A 3 ♥ C

A 4 C

A 5 C

A 6 C

A 7 C

A 8 C

Added Channels

Delete Add to Favourite Lock Timer Viewing Edit Channel Name Sort

▼

All



Channel Type Zoom Select

Option

824 UKTV Gold 825 UKTV style

1 C --

2 C

A 3 ♥ C

A 4 C

A 5 C

A 6 C

A 7 C

A 8 C

Added Channels

▲

Add to Favourite Lock Timer Viewing Edit Channel Name Sort Select All

▼

English - 24

Selecting and Deselecting All Channels

1. Press the MENU

button.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button.

2. Press the ▲ or ▼ button to select the channel, then press the T

OOLS

button.

3. Press the ▲ or ▼ button to select “Select All” or “Deselect

All”, then press

the ENTER button. You can only select “Deselect All” when there is a selected channel. You can select(or Deselect) all channel in the channel list. The

mark appears to the left of the selected channels.

Storing Channels in Memory (Auto Store)

1. Press the MENU

button.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button.

2. Press the ▲ or ▼ button to select the channel to be assigned a new name,

then press the T

OOLS button.

3. Press the ▲ or ▼ button to select “Auto Store”, then press the ENTER

button. For further details on setting up options, refer to page 11~12. If a channel is locked using the “Child Lock” function, the PIN input window

appears (refer to page 39).

➣

All



Channel Type Zoom Select

Option

824 UKTV Gold 825 UKTV style

1 C --

2 C

A 3 ♥ C

A 4 C

A 5 C

A 6 C

A 7 C

A 8 C

Added Channels

Delete Add to Favourite Lock Deselect All Select All Auto Store

All



Channel Type Zoom Select

Option

824 UKTV Gold 825 UKTV style

1 C --

2 C

A 3 ♥ C

A 4 C

A 5 C

A 6 C

A 7 C

A 8 C

Added Channels

▲

Lock Timer Viewing Edit Channel Name Sort Select All Auto Store

+ 58 hidden pages