Samsung ASH091VE, ASH071VE, AQ07A1VE, UQ12A1VE, SH-07YABX User Manual

...

OWNER’S INSTRUCTIONS MANUAL DE INSTRUCCIONES ISTRUZIONI PER L’USO MANUAL DE INSTRUÇÕES MANUEL D’UTILISATION GEBRAUCHSANWEISUNG

Split-type Room Air Conditioner (Cool and Heat)

Aire acondicionado doméstico sistema Split (Refrigeración y Calefacción)

Condizionatore d’aria per ambienti ad unità Separate

(Raffreddamento e Riscaldamento)

Aparelho de ar condicionado tipo Split (Refrigeração e Aquecimento)

Climatiseur de type Séparé (Refroidissement et Chauffage)

Geteilte raumklimaanlage

(Kühlen und Wärmen)

ASH070VE/D ASH090VE/D ASH120VE/D

ASH071VE/D ASH091VE/D ASH121VE/D

AQL09D1(D2)VE AQL12D1(D2)VE

AQL09A1(A2)VE AQL12A1(A2)VE

SH09LA1(A2) SH12LA1(A2)

Indoor Unit

AQ07A1(A2)VE AQ09A1(A2)VE/B AQ12A1(A2)VE/B

SH09ZV SH12ZV

SH07YA0 SH09YA0 SH12YA0

SH07YAA(B) SH09YAA(B) SH12YAA(B)

ENGLISH

ESPAÑOL

ITALIANO

PORTUGUÉS

FRANÇAIS

DEUTSCH

ESIPFD

DB68-00181A(8)

Safety Precautions

The following safety precautions must be taken when using your air conditioner.

1 Make sure that the indoor unit is correctly ventilated at all times; do NOT place clothing or other materials

over it.

2 NEVER spill liquid of any kind into the indoor unit. Should this happen, switch off the breaker used for your

air conditioner and contact your installation specialist.

3 Do NOT insert anything between the air flow blades, as the inner fan may be damaged and you may be hurt.

Keep children away from the indoor unit.

4 Do NOT place any obstacles in front of the outdoor unit.

5 If the remote control will not be used for a long time, remove the batteries.

6 Users of this product are cautioned not to attempt repair of this product at their own discretion.

Instead, they are requested to directly contact a designated service center or the outlet at which the product was purchased.

7 If the supply cord is damaged, it must be replaced by a special cord or assembly available from the

manufacturer or its service agent.

8 This device must be installed according to the national electrical rules.

9 Before throwing out the device, it is necessary to pull back the battery cells and get rid of them safely.

10 The following is applicable only to the low-temperature air-conditioner.

Applicable model: AQL09D1(D2)VE, AQL12D1(D2)VE, AQL09A1(A2)VE, AQL12A1(A2)VE

SH09LA1(A2), SH12LA1(A2). In particular, when the outdoor temperature falls below 0°C, in order to protect the compressor, the plug that is connected to the main power source should be unplugged and replaced by the attached heater plug, which will assure the product’s protection. However, in areas where the outdoor temperature does not fall below 0°C, use of the heater is not necessary.

Therefore, use of the heater should be determined by the prevailing environmental conditions.

E-2

The manufacturer do not take the responsibility of the accident happened because the air conditioner is not fixed firmly or installed securely, during installing or using the product. In case you have difficulty in installation, you must ask for an installation specialist help. The accident will be happened in case of installing improperly.

CCCCAAAAUUUUTTTTIIIIOOOONN

◆ PREPARING YOUR

AIR CONDITIONER

■ Safety Precautions........................................................................................ 2

■ View of the Indoor Unit.................................................................................. 4

■ View of the Outdoor Unit............................................................................... 4

■ Remote Control - Buttons and Display.......................................................... 5

■ Getting Started.............................................................................................. 6

■ Installing the Remote Control Holder on the Wall ......................................... 7

■ Inserting the Remote Control Batteries......................................................... 7

■ Setting the Time............................................................................................ 8

◆

OPERATING YOUR AIR CONDITIONER

■ Selecting the Automatic Operating Mode...................................................... 9

■ Cooling Your Room ....................................................................................... 10

■ Heating Your Room....................................................................................... 11

■ Changing the Room Temperature Quickly.................................................... 12

■ Removing Excess Humidity........................................................................... 13

■ Airing Your Room .......................................................................................... 14

■ Adjusting the Air Flow Direction Vertically ..................................................... 15

■ Adjusting the Air Flow Direction Horizontally................................................ 15

◆

PROGRAMMING YOUR AIR CONDITIONER

■ Switching the Unit On and Off Automatically (On/Off Timer)........................ 16

■ Setting the Sleep Timer................................................................................. 17

■ Setting the Quick Timer................................................................................. 18

■ Cancelling the On/Off Timer.......................................................................... 19

■ Cancelling the Sleep Timer........................................................................... 19

■ Cancelling the Quick Timer........................................................................... 19

◆

ECOMMENDATIONS FOR USE

■ Operating Recommendations........................................................................ 20

■ Temperature and Humidity Ranges............................................................... 21

■ Cleaning Your Air Conditioner....................................................................... 21

■ Solving Common Problems........................................................................... 22

■ Operating Your Air Conditioner Without the Remote Control........................ 23

■ Installing a Filter (Option).............................................................................. 24

◆

TECHNICAL SPECIFICATIONS

E-3

ENGLISH

View of the Indoor Unit

ON/OFF switch (operation without

remote control)

Air Filter (under the grille)

TIMER indicator

- YELLOW

OPERATION indicator

- Operation : GREEN

- Deice : RED

TURBO indicator

- RED

FAN indicator

- GREEN

Air flow blades (outlet)

Remote control sensor

Air Inlet

View of the Outdoor Unit

E-4

❄ The design and shape are subject to change according to the model.

UQL

✴✴✴

SH✴L

✴

SH✴YAA SH

✴

YAB

ASH

✴✴✴

SH✴YA0 SH

✴Z✴

Air Inlet Air Inlet Air Inlet

Connection Valve Connection Valve Connection Valve

Air OutletAir OutletAir Outlet

OPERATION

TIMER

FAN

TURBO

Remote control - Buttons and Display

E-5

Operating mode (AUTO, COOL, DRY, FAN, HEAT)

Turbo mode Sleep mode

Fan speed (AUTO, LOW, MEDIUM, HIGH)

Time/Timer settings

On/Off button

Turbo mode button Sleep timer button

Off Timer adjustment button

Fan speed adjustment button Timer on/off buttons

Time adjustment buttons

Timer setting/cancellation buttons

Remote control transmission indicator

Temperature adjustment buttons

Battery discharge indicator

Temperature settings

Air flow direction

Air flow swing button

Time setting Button

Mode selection button

(AUTO, COOL, DRY, FAN, HEAT)

ENGLISH

Getting Started

You have just purchased a split-type room air conditioner and it has been installed by your installation specialist.

Your Owner’s Instructions contain much valuable information on using your air conditioner. Please take the time to read them as they will help you take full advantage of the unit’s features.

The booklet is organized as follows.

◆ The following figures are shown on pages 4 and 5:

- Indoor and outdoor units

- Remote control (buttons and display) They will help you find the buttons and understand the symbols displayed.

◆ In the main part of the document, you will find a series of step-by-step

procedures for each function available.

The illustrations in the step-by-step procedures use three different symbols:

E-6

PRESS PUSH HOLD DOWN

Installing the Remote Control Holder on the Wall

The remote control is supplied with a plastic holder that can be fitted to the wall to hold the remote control when you are not using it. To attach the holder to the wall, proceed as follows.

1 With a pencil, mark the positions of the two holes on the wall where the

holder is to be installed.

2 Drill the two holes and insert plugs as required for the type of wall on

which the holder is being installed.

3 Screw the holder into position.

Result:

You can now slide the remote control in and out of the holder as required.

Inserting the Remote Control Batteries

You must insert or replace the remote control batteries when:

◆ You purchase the air conditioner

◆ The remote control does not work correctly

Use two LR03 1.5 V batteries. Do not use old batteries or different kinds of batteries together. Batteries may be completely discharged after 12 months, even if they have not actually been used.

1 Slide the remote control out of its holder. 2 Push the battery cover on the rear of the remote control with your

thumb in the direction of the arrow and remove it.

3 Insert the two batteries, taking care to respect the polarities:

◆ + on the battery with + on the remote control

◆ - on the battery with - on the remote control

4 Close the cover by sliding it back until it clicks into place.

NNNNoooottttee

E-7

ENGLISH

Setting the Time

E-8

Your air conditioner contains a clock used to start and stop the unit automatically at a given time.

You must set the time when you:

◆ Purchase the air conditioner

◆ Replace the batteries

NNNNoooottttee

ee Be sure to reset the time when you change clocks from

standard todaylight savings time and vice versa.

Setting the T

ime for the First Time

1 Insert the batteries.

◆ Push the battery cover on the rear of the remote control with your thumb and remove it.

Result

: The clock starts.

2 Using a small pointed tool (ball-point pen for example), Press the button.

Result

: The AM indication flashes.

3 To set the current time, press the or buttons under the cover on

the remote control.

To... Then...

Increase the time in one-minute intervals Press the (▲)button. Increase the time in ten-minute intervals Hold down the (▲)button. Decrease the time in one-minute intervals Press the (▼)button. Decrease the time in ten-minute intervals Hold down the (▼)button.

Result

: AM or PM is displayed to indicate whether the setting

corresponds to a time before or after midday.

4 When you are satisfied with your setting, confirm the time. To do so:

using a small pointed tool (ball-point pen for example), press the button. Result

: ◆ The AM or PM indication stops flashing.

◆ The clock starts.

Resetting the T

ime

If you have already set the time but wish to change it, proceed as follow.

1 Using a small pointed tool (ball-point pen for example), press the button

under the remote control flap. Result

: The AM or PM indication flashes.

2 Set the time, following the instructions in Step 3 in the procedure above. 3 When you are satisfied with your setting, confirm the time. To do so,

press the button, using a small pointed tool (ball-point pen for example).

Result

: ◆ The AM or PM indication stops flashing.

◆ The clock starts.

+ 18 hidden pages

Samsung ASH091VE, ASH071VE, AQ07A1VE, UQ12A1VE, SH-07YABX User Manual

Safety Precautions

Contents

View of the Indoor Unit

Remote control - Buttons and Display

Getting Started

Installing the Remote Control Holder on the Wall

Setting the Time