Samsung AS12PHGD, AS09P8GD User Manual

DB98-21804A
SPLIT-TYPE ROOM AIR CONDITIONER
( Cool )
OWNER’S INSTRUCTIONS
E
Indoor unit
AS09P8GD
AS09P8GE
AS12PHGD AS12PHGE
US09P8GD
US09P8GE
US12PHGD US12PHGE
E-2

Safety Precautions

The following safety precautions must be taken when using your air conditioner.
Users of this product are cautioned not to attempt repair of this product at their own discretion. Instead, they are requested to directly contact a designated service center or the outlet at which the product was purchased.
Never spill any kind of liquid into the unit. Should this happen, unplug or main switch off the unit and contact an authorized service center.
Do not insert anything between the air outlet blades because the inner fan may be damaged and could cause injury. Keep children away from the unit.
Do not place any obstacles in front of the unit.
Do not spray liquid of any kind into the indoor unit. Should this happen,
switch off the breaker used for your air conditioner and contact your installation specialist.
Make sure that the unit is correctly ventilated at all times: Do not place clothing or other materials over it.
If the wireless remote control will not be used for a long time, remove the batteries. (If applicable)
When using a wireless remote control, the distance should not be more than 7 meters from the air conditioner. (If applicable)
WARNING
DURING OPERATION
Never store or ship the air conditioner upside down or sideways to avoid damage to the compressor.
The appliance is not intended for use by young children or infirm persons without supervision: Young children should be supervised to ensure that they do not play with the appliance.
Max current is measured according to IEC standard for safety and current is measured according to ISO standard for energy efficiency.
O
THERS
Before throwing out the device, it is necessary to pull back the battery cells and get rid of them safely for recycling reasons.
When you need to dispose of the unit, consult your dealer. If pipes are removed incorrectly, refrigerant may blow out and come into contact with your skin, causing injury. Releasing refrigerant into the atmosphere also damages the environments.
Please recycle or dispose of the packaging material for this product in an environmentally responsible manner.
D
ISPOSING OF THE UNIT
Risk of electric shock. Can cause injury or death. Disconnect all remote electric power supplies before servicing, installing or cleaning.
This must be done by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard.
Register your product at www.samsung.com/global/register
E-3

Contents

P
REPARING YOUR AIR CONDITIONER
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
View of the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Remote Control-Buttons and Display . . . . . . . . . . . . . . . . . . . . . . 6
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Inserting the Remote Control Batteries . . . . . . . . . . . . . . . . . . . . . 8
O
PERATING YOUR AIR CONDITIONER
Selecting the Automatic Operating Mode . . . . . . . . . . . . . . . . . . . 9
Cooling Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Changing the Room Temperature Quickly . . . . . . . . . . . . . . . . . . 11
Removing Excess Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Airing Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Selecting Energy Saving Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
■ Generating Anion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Adjusting the Air Flow Direction Vertically . . . . . . . . . . . . . . . . . . . 16
Adjusting the Air Flow Direction Horizontally . . . . . . . . . . . . . . . . 17
P
ROGRAMMING YOUR AIR CONDITIONER
Setting the On Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Setting the Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
R
ECOMMENDATIONS FOR USE
Operating Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Temperature and Humidity Ranges . . . . . . . . . . . . . . . . . . . . . . . . 22
Operating Your Air Conditioner Without the Remote Control . . . . . 22
Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Cleaning Your Air Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Cleaning Deodorizing, Bio-Green and Titanium filter (Option) . . . . 25

View of the Unit

E-4
If you want to turn on/off the Display during operation, press the button on the remote control.
The room temperature sensor senses air temperature around the sensor, and shows the temperature on the display.
NNNNoooottttee
ee
Indoor Unit
Air filter
(under the grille)
Air flow blades
(outlet)
Remote Control Sensor
On/Off switch
Timer indicator
Fan speed setting
Sleep Timer indicator
Operation indicator
Set temperature & room temperature
Anion indicator
Auto grille
Air Inlet
Room temperature sensor
The design and shape are subject to change according to the model.
E-5
Outdoor Unit
Air Inlet (Rear)
Air Outlet
Air Outlet
Connec
tion Valve
Connec
tion Valve
Outdoor Unit
US09P8GD US09P8GE
Air Inlet (Rear)
US12PHGD US12PHGE

Remote Control - Buttons and Display

E-6
Operating mode
( AUTO, COOL,
DRY, FAN)
Remote control
transmission indicator
Digital i On/Off button
Off Timer setting
Energy saving
Anion button
Sleep button
Energy saving button
Swing button
Timer Set/Cancel button
Temperature adjustment buttons
Temperature setting Air flow direction
Turbo mode
Sleep mode
On/Off button
Mode selection button
(AUTO, COOL, DRY, FAN)
Fan speed adjustment
button
Turbo button
On Timer button
Off Timer button
Fan speed
Anion indicator
On Timer setting
Battery discharge indicator
G
etting Started
You have just purchased a split type air conditioner and it has been installed by your installation specialist.
Your Owner’s Instructions contains valuable information on using your air conditioner. Please take the time to read it as it will help you take full advantage of the unit’s features.
The booklet is organized as follows.
The following figures are shown on pages from 4 to 6 :
- Indoor and outdoor units
- Remote control(buttons and display) They will help you find the buttons and understand the symbols displayed.
In the manual, you will find a series of step-by-step procedures for each
function available.
The illustrations in the step-by-step procedures use three different symbols:
PRESS PUSH HOLD DOWN
E-7

Inserting the Remote Control Batteries

Push the battery cover on the rear of the remote control with your thumb in the direction of the arrow and remove it.
Insert the two batteries, taking care to respect the polarities :
+ on the battery with + on the remote control.
- on the battery with - on the remote control.
1
2
Close the cover by sliding it back until it clicks into place.
3
Use two AAA, LR03 1.5V batteries.
Do not use old batteries or different kinds of batteries together.
Batteries may be completely discharged after 12 months, even
if they have not actually been used.
You must insert or replace the remote control batteries when :
You purchase the air conditioner
The remote control does not work correctly
NNNNoooottttee
ee
E-8

Selecting the Automatic Operating Mode

E-9
You can start the air conditioner in Automatic mode from your remote control. In the Automatic mode, the optimum temperature and the fan speed is selected automatically.
1
If the is not displayed at the top of the remote control, press the button on the remote control one or more times until it appears.
Result
: The indoor unit beeps each time you press the button.
The air conditioner runs in AUTO mode.
2
You can change modes at any time.
If necessary, press the (On/Off) button. Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected when the unit was last used.
The indoor unit beeps.
The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
Plugged in
Stopped
lt will start up normally after three minutes.
IMPORTANT
NNNNoooottttee
ee
3 Press the button.
Result
4
To adjust the temperature, press button once or more times to get the required temperature.The scope of the temperature adjust should between standard temperature +2°C and -2°C
:
The indoor unit beeps. The air conditioner runs in the Energy saving mode,It will run at
+2°C of the standard temperature. The outer air flow blade moves up and down. To stop the Energy saving mode, press the button again.
Loading...
+ 19 hidden pages