Samsung 99-MWO-E0011-M SERVICE BULLETIN
SEC Code
Early
Mechanical Diagram ( )
SERVICE BULLETINELECTRONICS
Product : MICRO WAVE OVEN Bulletin No. : 99-MWO-E0011
Model : All models Bulletin Date : March,13, 1999
Buyer : All subsidiaries ECN Date : March, 13,1999
SUBJECT : How to paint the area where cavity coating is peeled off
Background : Damage to cavity is getting increased with its coating peeled off, especially
at the bottom of inside oven, front panel and/or inside door. On the other hand,
there is no service materials supplied for repair, which result in Return loss. So,
to minimize the return loss, we are ready to supply Touch-up paint for repair.
Cause :
Coating peeled off due to ; -
1) some salty food accumulated at the bottom, and
2) overweighted pressure of guide roller turning with heavy food on glass tray
3) arcing due to cooking wares touched to cavity wall
Solution :
Based on the below method
Step 1 : Scrub the area where Cavity coating is peeled off by arcing or
Step 2 : Apply Touch-up paint to the sanded area.
Step 3 : Use the oven after being dried at least for a day.
Application Date :
ITEM
Paint-touch up
SEC Code Description
- - DE02-00137A White (Powder) E
other reasons with a sand paper until any rust or paint chips
are removed completely. If necessary, any chisel will be available.
March, 1999
( * I.C : Interchangeability Code Type )
OLD (current) Parts NEW (changed) Parts
Description I.C
DE02-00137B Gray (Enamel) E
DE02-00137C
Blue (Enamel) E
*
Type A type B type C type D type E type F type
OLD
Status
(* I.C) NEW Late NEW Late NEW Late NEW Late
Applied to Reference ( ) Only Defected sets ( O ) Whole sets ( )
Attached with Schematic Diagram ( ) Component Lay-out ( ) Exploded View ( )
Lot affected
Published by J.K.Kim Checked by H.K.LIM Approved by T.Y.Song
(Part) (Time) (Part) (Time) (Part) (Time) (Part) (Time)
OLD Early OLD Early OLD Early Part Addition Part deletion
( ¡¿ ¡æ NEW) (OLD ¡æ ¡¿ )
None ( ) Others ( )
All
Serial No. (to ~ )
( Pages : 1 of 1 )
Loading...