Samsung 9513D User Manual

T55D.book Page 1 Wednesday, July 29, 1998 11:40 PM

These user’s setup instructions cover typical user environments. The on-screen messages may differ depending on the level of your hardware and software. In some cases you may need to vary the setup procedures.

For more information, refer to your computer or operating system manuals or consult your system administrator or dealer.

Ces instructions de configuration d’exploitation s’appliquent aux environnements d’utilisation types. Les messages affichés à l’écran peuvent varier en fonction du niveau de votre matériel et de vos logiciels informatiques. Dans certains cas, vous pouvez être amenés à changer de procédures de configuration.

Pour de plus amples informations à ce sujet, veuillez vous reporter aux manuels de votre ordinateur et de votre système d’exploitation, ou consultez l’administrateur de votre système ou votre revendeur.

Diese Anweisungen für die Einstellung durch den Benutzer gelten für typische Betriebsumgebungen. Die Bildschirmmeldungen können je nach Art der verwendeten Hardware und Software auch anders lauten. In einigen Fällen müssen die Einstellungsschritte unter Umständen abgeändert werden.

Weitere Informationen finden Sie im Computer- oder Betriebssystemhandbuch, oder wenden Sie sich an Ihren Systemadministrator oder Fachhändler.

En estas instrucciones de configuración se describen entornos de usuarios típicos. Los mensajes en pantalla, pueden diferir según sea el nivel del hardware y del software. En algunos casos, necesitará seguir otros procedimientos para la configuración.

Para obtener más información, puede consultar los manuales del ordenador o del sistema operativo o ponerse en contacto con el administrador del sistema o con el distribuidor.

Queste istruzioni di configurazione per l’utente coprono gli ambienti operativi comuni. I messaggi che appaiono sul video possono differire a seconda dell’hardware e del software utilizzati. In alcuni casi potrebbe essere necessario variare le procedure di configurazione.

Per ulteriori informazioni, fare riferimento ai manuali del computer o del sistema operativo, o consultare il proprio amministratore di sistema o il concessionario.

T55D.book Page 2 Wednesday, July 29, 1998 11:40 PM

T55D.book Page c Wednesday, July 29, 1998 11:40 PM

DANGER

To avoid shock hazard:

• Do not remove the covers.

• Do not operate this product unless the stand is attached.

• Do not connect or disconnect this product during an electrical storm.

• The power cord plug must be connected to a properly wired and grounded power outlet.

• Any equipment to which this product will be attached must also be connected to properly wired and grounded power outlets.

• To isolate the monitor from the electrical supply, you must remove the plug from the power outlet. The power outlet should be easily accessible.

DANGER

Pour éviter les risques d’électrocution :

• Ne retirez pas les capots du moniteur.

• N’utilisez pas ce produit si le socle n’est pas fixé.

• Ne connectez, ni ne déconnectez ce produit pendant un orage.

• Le câble d’alimentation doit être connecté à une prise électrique correctement mise à la terre et en bon état de marche.

• Tout équipement auquel ce produit est relié doit être également connecté à une prise correctement mise à la terre et en bon état de marche.

• Pour isoler le moniteur de la source d’alimentation électrique, vous devez le débrancher de la prise électrique. Cette prise doit être facile d’accès

GEFAHRENHINWEIS

Um die Gefahr eines elektrischen Schlags zu vermeiden, folgendes beachten:

• Unter keinen Umständen die Abdeckungen abnehmen.

• Das Produkt nicht in Betrieb nehmen, wenn der Sockel nicht montiert ist.

• Das Gerät nicht während eines Gewitters an eine Steckdose anschließen oder von ihr trennen.

• Das Netzkabel ist an eine ordnungsgemäß verdrahtete und geerdete Steckdose anzuschließen.

• Jedes Gerät, mit dem dieses Produkt verbunden wird, muß ebenfalls an eine ordnungsgemäß verdrahtete und geerdete Steckdose angeschlossen werden.

• Um den Monitor von der Stromversorgung zu trennen, muß der Stecker aus der Steckdose gezogen werden. Die Steckdose sollte leicht zugänglich sein.

T55D.book Page d Wednesday, July 29, 1998 11:40 PM

GEVAAR

Ga als volgt te werk om het gevaar van een elektrische schok te voorkomen:

• Verwijder in geen enkel geval de kap.

• Stel dit produkt alleen in werking als de voet is bevestigd.

• Sluit dit apparaat niet aan op, of verbreek de aansluiting van dit apparaat niet van een contactdoos tijdens onweer.

• Het netsnoer moet worden aangesloten op een geaarde contactdoos met correcte bedrading.

• Ook alle apparatuur waarop dit produkt wordt aangesloten moet zijn aangesloten op een contactdoos met correcte bedrading.

• Om het beeldscherm te ontkoppelen van de netvoeding, dient u de stekker uit de contactdoos te trekken. De contactdoos dient goed toegankelijk te zijn.

PELIGRO

Para evitar riesgos de descargas eléctricas:

• No retire bajo ningún concepto las cubiertas.

• No maneje el monitor sin antes acoplar el soporte.

• No conecte ni desconecte el equipo de una toma de alimentación durante una tormenta eléctrica.

• El cable de alimentación debe estar conectado a un enchufe debidamente cableado y con toma de tierra.

• Cualquier equipo al que se vaya a conectar este producto también debe estar conectado a tomas de alimentación cableadas y conectadas a tierra correctamente.

• Para aislar el monitor del suministro eléctrico, debe retirar el enchufe de la toma de alimentación. Esta toma deberá ser de fácil acceso.

PERICOLO

Per evitare il rischio di scariche elettriche:

• Non rimuovere nessuna parte del telaio.

• Non accendere il prodotto se il piedistallo non è stato montato.

• Non collegare o scollegare il prodotto nel corso di un temporale.

• La spina del cavo di alimentazione deve essere collegata ad una presa di corrente con messa a terra, installata in maniera appropriata.

• Le apparecchiature a cui il prodotto viene attaccato devono essere collegate a prese di corrente con messa a terra, installate in maniera appropriata.

• Per isolare il monitor dalla corrente elettrica, staccare la spina dalla presa di alimentazione, che deve essere facilmente accessibile.

T55D.book Page e Wednesday, July 29, 1998 11:40 PM

PERIGO

Para evitar o perigo de choques eléctricos:

• Não retire as coberturas.

• Não utilize este produto antes de montar a base.

• Não ligue nem desligue este produto durante uma tempestade eléctrica.

• O cabo de alimentação deve ser ligado a uma tomada eléctrica devidamente ligada à terra.

• Qualquer equipamento ligado a este produto deve estar ligado a tomadas eléctricas devidamente ligadas à terra.

• Para isolar o monitor da fonte de alimentação, retire a ficha do cabo de alimentação da tomada eléctrica. A tomada eléctrica deve ser de fácil acesso.

FARE

Sådan undgår du elektrisk stød:

• Kabinettet må under ingen omstændigheder fjernes.

• Undgå at anvende dette produkt, uden at vippe/drejefoden er monteret.

• Undgå at tilslutte eller frakoble dette produkt i tordenvejr.

• Netledningen skal være tilsluttet en korrekt jordet stikkontakt med korrekt ledningsføring.

• Alt udstyr, som tilsluttes dette produkt, skal også være tilsluttet korrekt jordede stikkontakter med korrekt ledningsføring.

• For at isolere skærmen fra strømforsyningen, skal stikket tages ud af stikkontakten. Stikkontakten bør være let tilgængelig.

FARE

Slik unngår du fare for elektrisk støt:

• Ikke ta av dekslene.

• Ikke bruk produktet dersom sokkelen ikke er montert.

• Ikke koble produktet til eller fra under tordenvær.

• Pluggen på strømledningen må kobles til korrekt montert og jordet strømuttak.

• Utstyr som dette produktet eventuelt blir koblet til, må også kobles til korrekt montert og jordet strømuttak.

• For å isolere skjermen fra strømkilden må du ta ut pluggen fra strømuttaket. Strømuttaket bør være lett tilgjengelig.

T55D.book Page f Wednesday, July 29, 1998 11:40 PM

Varning - livsfara

För att undvika risk för elektriska stötar måste du tänka på följande:

• Ta inte bort några skyddskåpor.

• Använd inte den här produkten innan du har satt fast stativet.

• Anslut inte produkten till ett eluttag under åskväder. Koppla inte heller ur produkten från ett eluttag under åskväder.

• Strömkabeln måste anslutas till ett felfritt och jordat uttag.

• All utrustning som den här produkten kopplas till måste också anslutas till felfria och jordade uttag.

• För att bryta strömmen till bildskärmen måste du dra ut kontakten. Vägguttaget bör vara lätt att komma åt.

VAARA

Sähköiskun vaaran välttämiseksi:

• Älä avaa laitteen kansia missään tilanteessa.

• Älä käytä laitetta, ellei jalustaa ole kiinnitetty.

• Älä kytke laitetta pistorasiaan tai irrota sitä pistorasiasta ukonilman aikana.

• Virtajohto on kytkettävä asianmukaisesti johdotettuun ja maadoitettuun pistorasiaan.

• Kaikki muutkin laitteet, joihin tämä tuote on liitetty, on kytkettävä asianmukaisesti johdotettuihin pistorasioihin.

• Kun haluat erottaa näyttimen sähköverkosta, sinun pitää irrottaa sen verkkojohto pistorasiasta. Pistorasian pitäisi olla mahdollisimman lähellä näytintä ja vaivattomasti käsillä.

Greek

Hungarian

Text is being formatted by an outside vendor. We will give you the file when we get it. We will have both Greek and Hungarian in time for printing.

T55D.book Page 1 Wednesday, July 29, 1998 11:40 PM

Contents

Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Your IBM Digital TFT Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Workplace Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Working Practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Unpacking the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Connecting your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Switching on your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Adjusting the Monitor Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Caring for your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Graphics Card Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Software Setup - DOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Software Setup - Windows 95/98 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Software Setup - Windows NT 4.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Software Setup - OS/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

ENGLISH

Adjusting Your LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

User controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Further Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Further Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Compliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I

T55D.book Page 2 Wednesday, July 29, 1998 11:40 PM

Federal Communications Commission (FCC) Statement . . . . . . . . . . . . . . . . . .I

Industry Canada Compliance Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I

NOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .I

Power Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .III

Statement of Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .III

T55D.book Page 2 Wednesday, July 29, 1998 11:40 PM

Your IBM Digital TFT Monitor

To provide the best performance your Digital TFT Monitor uses a digital video card which was shipped in the monitor package Accessories box. You may also use your own digital video card.

Workplace Preparation

Setup

This section gives advice

on what you should consider before you set up your monitor.

Working Practices

This section gives

advice on how you can work comfortably and reduce fatigue.

Height

The monitor should be positioned so that the top of the screen is slightly below your eye level when you sit at your workstation.

Orientation

Choose a position that gives the least reflection from lights and windows, usually at a right angle to any windows. The monitor should be positioned directly in front of you so that you do not have to twist your body to use it. Tilt the monitor to a comfortable viewing angle.

Rest

Take regular breaks. Vary your posture, stand up and stretch occasionally as prolonged use of computer workstations can be tiring.

Back

You should sit back in your chair and use the backrest.

Hands

Use a light touch on the keyboard, keeping your hands and fingers relaxed. Allow a space in front of the keyboard to rest your wrists when not typing. Consider using a wristpad.

Eyesight

Working with monitors, in common with any prolonged close work, can be visually demanding. Look away from the screen periodically and have your eyesight checked regularly.

T55D.book Page 3 Wednesday, July 29, 1998 11:40 PM

Screen settings

Set the screen brightness and contrast to a comfortable level. You may have to adjust this as the lighting changes during the day. Many application programs let you select color combinations which can help you to view in comfort.

Unpacking the Monitor

1. Put the box on a flat, solid surface.

Use caution when

removing the foam cushions from the monitor. The power adapter block has been stored in a recess in the RIGHT foam cushion and is connected to the monitor. Make sure the cable is not pulled while removing the foam cushions.

The Accessories box

contains the graphics card among others. For installation, see Graphics Card Installation on page 6.

2. Open the carton box and remove the Accessories boxes.

3. Firmly grasp the two foam cushions and pull the monitor out of the

4. Remove the power adapter block which has been stored in the Right

5. Support the monitor while you carefully remove each foam cushion.

ENGLISH

carton box. (Refer to Fig. 1)

foam cushion.

(Refer to Fig. 2)

Fig. 1 Fig. 2

Power Adapter

Do not support the monitor

within the screen area. The Liquid Crystal Display is glass and can be damaged by rough handling or excessive pressure.

Accessories boxes

6. Remove the polyethelene bag from the monitor.

7. Remove the clear information film from the monitor face and perform setup.

T55D.book Page 4 Wednesday, July 29, 1998 11:40 PM

Connecting your Monitor

Be sure to read the

‘Safety Information’ at the front of this User Guide before carrying out this procedure.

You must install the video

card into the computer before connecting the signal cable to it. See Hardware Installation on page 7 for installation.

The AC adapter and P&D

signal cable are connected to your monitor If you wish to change these or to fit a different stand, see Further Help on page 22.

1. Turn off your PC and all attached devices.

2. Connect the P&D adapter at the end of the signal cable to the P&D port located on the back of the video card.

3. Connect the power cord to the power adapter first, then insert the plug into a properly grounded electrical outlet.

4. Turn on the monitor and then the computer.

5. Install the video card software by following the instructions in the Software Installation section on page 9.

Switching on your Monitor

Switch on the power source and your computer. To turn on the monitor, push and release the power switch . To switch it off, push and release the power switch again.

+ 23 hidden pages