Samsung HT-F4530, 51CH, HTF4500, HTF5500 User Manual

HT-F4500 HT-F4530

5.1CH Blu-ray™

Home Entertainment System

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Safety Information

Warning

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lighting flash and arrowhead within the triangle are warning signs alerting you to dangerous voltage inside the product.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

Note to CATV system installer

This reminder is provided to call the CATV system installer’s attention to Section 820~40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

CLASS 1 LASER product

This product is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

The exclamation point within the triangle is a warning sign alerting you to important instructions accompanying the product.

DANGER :

• VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. (FDA 21 CFR)

CAUTION :

• CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO THE BEAM (IEC 60825-1)

• THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LÁSER CLASE 1

2 English

Precautions

Important Safety Instructions

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with a dry cloth.

Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions. Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus (including AV receivers) that produce heat.

Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on

10.

or pinched particularly at plugs, convenience receptacles, and the point where it exits the apparatus.

Only use attachments/accessories specified by the

11.

manufacturer. Use only with the cart, stand,

12.

tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

Unplug this apparatus during lightning storms or

13.

when unused for long periods of time. Refer all servicing to qualified service personnel.

14.

Servicing is required when the apparatus has been damaged in any way, such as when the powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Disc Storage & Management

• Holding Discs

- Fingerprints or scratches on a disc may reduce sound and picture quality or cause skipping.

- Avoid touching the surface of a disc where data has been recorded.

- Hold the disc by the edges so that fingerprints will not get on the surface.

- Do not stick paper or tape on the disc.

• Cleaning Discs

- If you get fingerprints or dirt on a disc, clean it with a mild detergent diluted in water and wipe with a soft cloth.

- When cleaning, wipe gently from the inside to the outside of the disc.

- Disc Storage

Do not keep in direct sunlight. Keep in a cool ventilated area. Keep in a clean protection jacket and store

vertically.

Handling Cautions

• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases, on the apparatus.

• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.

• Do not touch the power plug with a wet hand. It can cause an electric shock.

• Do not plug multiple electric devices into the same wall socket. Overloading a socket can cause it to overheat, resulting in a fire.

• Before connecting other components to this product, be sure to turn them off.

• If you move your product suddenly from a cold place to a warm place, condensation may occur on the operating parts and lens and cause abnormal disc playback. If this occurs, unplug the product, wait for two hours, and then connect the plug to the power outlet. Then, insert the disc, and try to play back again.

• If the product makes an abnormal noise or produces a burning smell or smoke, turn off the power switch immediately and disconnect the power plug from the wall outlet. Then, contact the nearest customer service center for technical assistance. Do not use the product. Using the product as it is may cause a fire or an electric shock.

01 Safety Information

English 3

Safety Information

• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.

License

Manufactured under license from Dolby Laboratories.

Dolby, Pro Logic, and the double-D symbol are

trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent Nos:

5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered trademarks & DTS-HD Master Audio | Essential is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

The terms HDMI and HDMI High-Definition Multimedia

Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

DLNA®, the DLNA Logo and DLNA CERTIFIED® are

trademarks, service marks, or certification marks of the Digital Living Network Alliance.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

Blu-ray Disc™, Blu-ray™, and the logos are trademarks of Blu-ray Disc Association.

This product uses Cinavia technology to limit the use of unauthorized copies of some commerciallyproduced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA.” This product incorporates proprietary technology under license from Verance Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010 Verance Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited.

- Open Source License Notice In the case of using open source software, Open

Source Licenses are available on the product menu.

Using the 3D Function

IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and understand the following safety information before using the 3D function.

• Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea, and headaches. If you experience any such symptom, stop viewing 3D TV, remove the 3D Active Glasses, and rest.

• Watching 3D images for an extended period of time may cause eye strain. If you feel eye strain, stop viewing 3D TV, remove your 3D Active Glasses, and rest.

• A responsible adult should frequently check on children who are using the 3D function. If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest.

• Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, protective goggles, etc.)

• Do not use the 3D function or 3D Active Glasses while walking or moving around. Using the 3D function or 3D Active Glasses while moving around may cause you to bump into objects, trip, and/or fall, and cause serious injury.

4 English

• If you want to enjoy 3D content, connect a 3D device (3D compliant AV receiver or TV) to the product’s HDMI OUT port using a high-speed HDMI cable. Put on 3D glasses before playing the 3D content.

• The product outputs 3D signals only through HDMI cable connected to the HDMI OUT port.

• As the video resolution in 3D play mode is fixed according to the resolution of the original 3D video, you can not change the resolution to your preference.

• Some functions such as BD Wise, screen size adjustment, and resolution adjustment may not operate properly in 3D play mode.

• You must use a high-speed HDMI cable for proper output of the 3D signal.

• Stay at least three times the width of the screen from the TV when watching 3D images. For example, if you have a 46 inch screen, stay 138 inches (11.5 feet) from the screen.

- Place the 3D video screen at eye level for the best 3D picture.

• When the product is connected to some 3D devices, the 3D effect may not function properly.

• This product does not convert 2D content into 3D.

• “Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of the Blu-ray Disc Association.

Copyright

may be reproduced or copied without the prior written permission of Samsung Electronics Co.,Ltd.

Contents

SAFETY INFORMATION

2 Warning 3 Precautions 3 Disc Storage & Management 3 Handling Cautions 4 License 4 Using the 3D Function 5 Copyright

GETTING STARTED

6 Disk and Format Compatibility 7 Logos of Discs the product can play 9 Accessories 10 Front Panel 10 Rear Panel 11 Remote Control

CONNECTIONS

12 Connecting the Speakers 14 Connecting to a Network Router 15 Connecting to TV/External Devices

SETTINGS

16 The Initial Settings Procedure 17 The Home Screen 17 Accessing the Settings Screen 18 Settings Menu Functions 20 Networks and the Internet 21 Upgrading Software 22 Setting Up DLNA

MEDIA PLAY

23 Playing Files on a USB Device 23 Playing a Disc with User Recorded Content 24 Playing a Commercial Video Disc 24 Controlling Video Playback 25 Playing a Pre-Recorded Commercial Audio Disc 26 Controlling Music Playback 26 Controlling Photo Playback 27 Listening to Radio 27 Using the TV SOUND Button on the Remote

Control

NETWORK SERVICES

28 Using BD-LIVE™ 28 Using DLNA

APPENDIX

29 Additional Information 32 Troubleshooting 35 Specifications

01 Safety Information

English 5

Getting Started

Disk and Format Compatibility

Disc Types and Contents Your Product Can Play

Media Disc Type Details

Blu-ray Disc

3D Blu-ray Disc

VIDEO

MUSIC

PHOTO

| NOTES |

The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.



If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.



Your product will not play content that has been recorded on a DVD-R at a bitrate that exceeds 10 Mbps.



Your product will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds 30



Mbps. Playback may not work for some types of discs, or when you use specific operations, such as angle change



and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary. When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.



DVD-VIDEO, DVD-RW,

DVD-R, DVD+RW,

DVD+R

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

Disc Types Your Product Cannot Play

BD-ROM or BD-RE/-R disc recorded in the BD-RE format.

DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R discs that have been recorded and finalized, or a USB storage media containing MKV, MP4 contents.

Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB storage media containing MP3 or WMA contents.

Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB storage media containing JPEG contents.

• HD DVD

• DVD-ROM/PD/MV-Disc, etc

| NOTES |

This product may not respond to all operating commands because some Blu-ray Disc, DVD, and CD discs allow



specific or limited operation and provide only certain features during playback. Please note that this is not a defect in the product. Samsung cannot guarantee that this product will play every disc bearing the Blu-ray Disc, DVD or CD logo because



disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software and/or the manufacture of discs. Please contact the SAMSUNG Customer Care Center at 1-800-726-7864 if you have questions or encounter



difficulty when playing Blu-ray Disc, DVD, or CD discs in this product. Also, refer to rest of this user manual for additional information on playback restrictions. Some commercial discs and DVD discs purchased outside your region may not play on this product.



6 English

• DVD-RAM

• Super Audio CD (except CD layer)

• DVD-RW(VR mode)

• CVD/CD-ROM/CDV/ CD-G/CD-I/LD (CD-Gs play audio only, not graphics.)

• 3.9 GB DVD-R Disc for Authoring.

Region Code

Both products and discs are coded by region. These regional codes must match for a disc to play. If the codes do not match, the disc will not play. The Region Number for this product is displayed on the rear panel of the product.

Disc Type

Blu-ray Disc

DVD-VIDEO

| NOTES |

If the Region number of a Blu-ray Disc/DVDs does not



correspond to the Region number of this product, the product cannot play the disc.

Region

Code

North America, Central

America, South America,

Korea, Japan, Taiwan, Hong

Kong and South East Asia.

Europe, Greenland, French

territories, Middle East, Africa,

Australia and New Zealand.

India, China, Russia, Central

and South Asia.

The U.S., U.S. territories and

Europe, Japan, the Middle

East, Egypt, Africa, Greenland

Taiwan, Korea, the Philippines,

Indonesia, Hong Kong

Mexico, South America,

Central America, Australia,

New Zealand, Pacific Islands,

Russia, Eastern Europe, India,

North Korea, Mongolia

Area

Canada

Caribbean

China

Logos of Discs the product can play

Blu-ray Disc BD-LIVE

Dolby DTS

3D Blu-ray Disc Java

NTSC broadcast system in U.S.A, Canada, Korea,

Japan

Supported Formats

Music File Support

File

Extension

*.mp3

*.wma

Container

MP3

WMA

Audio

Codec

WMA

Support Range

MP3 -

* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48

* Bitrates - All bitrates from 5kbps to 384kbps

02 Getting Started

English 7

Getting Started

Picture File Support

File Extension Type Resolution

*.jpg

*.jpeg

*.jpe

*.png

Video File Support

File Extension Container Video Codec Audio Codec Resolution

*.avi

*.mkv

*.wmv

*.mp4

*.mpg

*.mpeg

AVI

MKV

WMV

(wmv9)

MP4

Limitations

- Even when a file is encoded by a supported codec listed above, the file might not be played if its content has a problem.

- Normal playback is not guaranteed if the file’s container information is wrong or the file itself is corrupted.

- Files having a higher bitrate/frame rate than standard may stutter during sound/video playback.

- The Seek (skip) function is not available if the file’s index table is damaged.

Video decoder

- Supports up to H.264 Level 4.1 and AVCHD

- Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4

- MPEG4 SP, ASP : Below 1280 x 720 : 60 frames max Above 1280 x 720 : 30 frames max

- Does not support GMC 2 or higher

Audio decoder

- Supports WMA 7, 8, 9 and STD

- Does not support WMA sampling rate of 22050Hz mono.

- AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96) Max bitrate: 320kbps

AVCHD (Advanced Video Codec High Definition)

• This product can play back AVCHD format discs. These discs are normally recorded and used in camcorders.

• The AVCHD format is a high definition digital video camera format.

• The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the conventional image compressing format.

• Some AVCHD discs use the “x.v.Color” format. This product can play back AVCHD discs that use “x.v.Color” format.

JPEG

PNG

MP4v3

H.264 BP/MP/HP

VC-1 AP

H.264 BP/MP/HP

VC-1 AP VC-1 SM

MP4 (mp4v)

H.264 BP/MP/HP

MPEG1 MPEG2

H.264 BP/MP/HP

15360x8640

MP3, Dolby Digital, DTS,

WMA, PCM

MP3, Dolby Digital, DTS

WMA

AAC

MP1, 2

Dolby Digital, DTS

1920x1080

8 English

• “x.v.Color” is a trademark of Sony Corporation.

• “AVCHD” and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd. and Sony Corporation.

| NOTES |

Some AVCHD format discs may not play, depending on the recording conditions.



AVCHD format discs need to be finalized.



“x.v.Color” offers a wider color range than normal DVD camcorder discs.



Some MKV and MP4 format discs may not play, depending on their video resolution and frame rate.



Notes on the USB connection

• Your product supports USB storage media, MP3 players, digital cameras, and USB card readers.

• The product does not support folder or file names longer than 128 characters.

• Some USB/External HDD/digital camera devices may not be compatible with the product.

• Your product supports the FAT 16, FAT 32, and NTFS files systems.

• Connect USB devices directly to the product’s USB port. Connecting through a USB cable may cause compatibility problems.

• Inserting more than one memory device into a multi-card reader may cause the reader to operate improperly.

• The product does not support the PTP protocol.

• Do not disconnect a USB device during a “loading” process.

• The bigger the image resolution, the longer the image takes to display.

• This product cannot play MP3 files with DRM (Digital Rights Management) downloaded from commercial sites.

• Your product only supports video that is under 30fps (frame rate).

• You must remove the USB storage device safely (by performing the “Safely Remove USB” function) to prevent possible damage to the USB memory. Press the HOME button to move to the home menu, press the YELLOW (C) button, and then press the E button.

• SAMSUNG is not responsible for any data file damage or data loss.

Accessories

Check for the supplied accessories below.

02 Getting Started

FUNCTION

MUTE

VOLUME

123 4

56 89

DISC MENU TITLE MENU

POPUP

SUBTITLE HOME REPEAT

INFO

TOOLS

RETURN

EXIT

TUNER

MO/ST

MEMORY

ABCD

TUNING

DSP/EQTV SOUND

DOWN

Power Cable User Manual FM Antenna Remote Control /Batteries (AAA size)

 Figures and illustrations in this User Manual are provided for reference only and may differ from actual

product appearance.

An administration fee may be charged if either

a. an engineer is called out at your request and there is no defect in the product (i.e. where you have failed

to read this user manual)

b. you bring the unit to a repair center and there is no defect in the product (i.e. where you have failed to

read this user manual).

 The amount of such administration charge will be advised to you before any work or home visit is carried

out.

English 9

Getting Started

5V 500mA

HDMI OUT

LAN

POWER

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT

SURROUND

FRONT

SURROUND

SPEAKER IMPEDANCE : 3

AUX

FM ANT

OPTICAL

DIGITAL

AUDIO IN

Front Panel

PLAY/PAUSE ENTER

STOP OPEN/CLOSE

FUNCTION

VOLUME CONTROL

DISC TRAY

DISPLAY

USB HOST

POWER

REMOTE CONTROL

SENSOR

| NOTES |

To upgrade the product's software through the USB Host jack, you must use a USB memory stick.



When the product displays the Blu-ray Disc menu, you cannot start the movie by pressing the 6 button on the



product or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the

button.

If you use the Internet service or play the USB device contents on the TV, you cannot select the BD/DVD mode with



the FUNCTION button. Stop the playing contents on the TV first to select the BD/DVD mode.

Rear Panel

COOLING FAN

CONNECTORS

* Connecting the FM Antenna

Connect the FM antenna supplied to the FM ANTENNA Jack.

Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or

other rigid surface.

AUX IN *FM ANT HDMI OUT

EXTERNAL DIGITAL AUDIO

LANPOWER CORD SPEAKER OUTPUT

IN (OPTICAL)

| NOTES |

Ensure a minimum of 4 inches of clear space on all sides of the home theater to ensure adequate ventilation.



Do not obstruct the cooling fan or ventilation holes. This product does not receive AM broadcasts.



10 English

Remote Control

Tour of the Remote Control

02 Getting Started

Turn the product on and off.

Adjust the volume.

Press numeric buttons to operate

options.

Press to view the disc menu.

Press to skip backwards or forwards.

Press to play a disc.

Press to stop a disc.

Selects the disc subtitle language.

Press to move to the Home screen.

Press to use the Tools menu.

Select on-screen menu items and

change menu value.

Return to the previous menu.

These buttons are used both for

menus on the product and also

several Blu-ray Disc functions.

Audio signal can output to home

theater speaker or TV speaker.

(See page 27)

Select the desired DSP/EQ audio

mode.

FUNCTION

VOLUME

1 4 7

DISC MENU TITLE MENU

SUBTITLE HOME REPEAT

TOOLS

RETURN

ABCD

DSP/EQTV SOUND

MUTE

3 56 89

POPUP

INFO

EXIT

TUNER

MO/ST

MEMORY

TUNING

DOWN

Press to select Blu-ray's mode. (BD/DVD, D. IN, AUX, etc.).

To open and close the disc tray.

Cut off the sound temporarily.

Use to enter the Popup menu/ Title menu.

Press to search backwards or forwards.

Press to pause a disc.

Allows you to repeat a title, chapter, track or disc.

Use to display the playback information when playing a Blu-ray/DVD disc.

Press to exit the menu.

Use to set a preset radio frequency.

Select MONO or STEREO for radio broadcasts.

Search for active FM stations and to change channels.

Installing batteries in the Remote Control

Make sure to match the “+” and “–” ends of the batteries with the



diagram inside the compartment. Assuming typical TV usage, the batteries last for about one year.



The remote control can be used up to approximately 23 feet



(7 meters) from the product in a straight line.

Battery size: AAA

English 11

Connections

This section describes various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

Connecting the Speakers

Position of the product

Place it on a stand or cabinet shelf, or under the TV stand.

Subwoofer

Front (L)

Surround (L)

Front Speakers

Center

Front (R)

Product

Place these speakers in front of your listening position, facing inwards (about 45°) toward you. Place the front speakers so that their tweeters will be at the same height as your ear. Align the front face of the front speakers with the front face of the center speaker or place them slightly in front of the center speakers.

Surround (R)

Selecting the Listening Position

The listening position should be located about 2.5 to 3 times the size of the TV's screen from the TV. For example, if you have a 46 inch screen, locate the listening position 115 to 138 inches (9.6 to11.5 feet) from the screen.

Center Speaker

Surround Speakers

Subwoofer

It is best to install the Center Speaker at the same height as the front speakers. You can also install it directly over or under the TV.

Place these speakers to the side of your listening position. If there isn't enough room, place these speakers so they face each other. Position them about 2 to 3 feet (60 to 90cm) above your ear, facing slightly downward.

* Unlike the front and center speakers, the surround speakers are used mainly for sound

effects. Sound will not come from them all the time.

The position of the subwoofer is not so critical. Place it anywhere you like.

Speaker Components

HT-F4500

(L) (R)

FRONT

12 English

(L) (R)

SURROUND

CENTER SUBWOOFER

SPEAKER CABLE

HT-F4530

03 Connections

(L) (R)

SPEAKER CABLE

FRONT

STAND BASE

Installing the Speakers on the Tallboy Stand

* HT-F4530 only - Front Speakers

Turn the Stand Base upside-down and connect it to the Stand.

Use the driver to combine the screws on the 3 marked holes.

Straighten a supplied speaker wire to the gravity direction and

put in the hole on the center of Stand Base. Connect the upper Speaker to the assembled Stand.

Insert a screw clockwise into the hole on the rear of the speaker

using a screwdriver. And then connect a speaker cable.

This is the appearance after the speaker is installed.

Follow this steps to install other speaker.

CENTER

(L) (R)

SURROUND

Stand Base

Stand

3 4

5 6

SCREW (5x20): 8EA

SUBWOOFERSTAND

Speaker

Stand

Connecting The Speakers

Match each speaker cable bundle to the correct speaker by matching the color

coded plug on each bundle to the colored sticker on the bottom of each speaker. To attach speaker wire to each speaker:

a. Press down the red tab on the back of the speaker, insert the red wire, and then

release the tab.

b. Press down the black tab on the back of the speaker, insert the black wire, and

then release the tab.

Connect the speaker wire plugs from each speaker to the back of the product by

matching the colors of the speaker plugs to the colors of the speaker jacks.

Black

Red

English 13

Connections

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT

SURROUND

FRONT

SURROUND

SPEAKER IMPEDANCE : 3

AUX IN

FM ANT

OPTICAL

DIGITAL AUDIO IN

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT

SURROUND

FRONT

SURROUND

SPEAKER IMPEDANCE : 3

HDMI OUT

LAN

POWER

AUX IN

FM ANT

OPTICAL

DIGITAL AUDIO IN

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT

SURROUND

FRONT

SURROUND

SPEAKER IMPEDANCE : 3

In case of HT-F4500

Surround Speaker (R)

Front Speaker (R)

Surround Speaker (L)

Front Speaker (L)

Center Speaker

Subwoofer

Refer to page 13 for the speakers of HT-F4530.

| CAUTION |

If you want to install the speakers on the wall, fasten screws or nails (not provided) firmly to the wall wherever you



want to hang a speaker, and then, using the hole in the rear of each speaker, carefully hang each speaker on a screw or nail. Do not let children play with or near the speakers. They could get hurt if a speaker falls.



When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.



Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien



substances into the duct (hole) of the subwoofer speaker. Do not hang the subwoofer on the wall through the duct (hole).



| NOTES |

If you place a speaker near your TV set, the screen color may be distorted because of the magnetic field.



Connecting to a Network Router

Broadband modem

Broadband service

Broadband modem (with integrated router)

| NOTES |

Your router or your Internet Service Provider's policies may prevent the product from accessing Samsung's software



update server. If this occurs, contact your Internet Service Provider (ISP) for more information. DSL users, please use a router to make a network connection.



To use the DLNA function, you must connect a PC to the network as shown in the figure. The connection can be



Broadband service

Router

wired or wireless.

14 English

Connecting to TV/External Devices

HDMI OUT

LAN

POWER

AUX

FM ANT

OPTICAL

DIGITAL AUDIO IN

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT

SURROUND

FRONT

SURROUND

SPEAKER IMPEDANCE : 3

HDMI OUT

LAN

AUX

FM ANT

OPTICAL

DIGITAL AUDIO IN

OPTICAL OUT

HDMI IN

03 Connections

Method 1 Method 2

Red

External Devices

White

Connecting to a TV

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV. If the TV supports ARC, you can hear the audio from your TV through the home theater with only this cable connected. See page 19 in this manual and the section on ARC in your TV's user's manual for details.

Connecting to External Devices

To select the correct mode for an external device after you have connected the device, press the FUNCTION button. Each time you press the button, the mode changes in this order : BD/DVD  D. IN  AUX  FM Two methods of connecting external devices to your home theater are explained below.

Method 1 AUX IN : Connecting an External Analog Component

Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on the external analog component.  Select the AUX mode.

• Be sure to match the colors on the cable plugs to the colors on the input and output jacks.

Method 2 OPTICAL : Connecting an External Digital Audio Component

Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers (SetTop-Boxes).

Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device using a digital optical cable.

Select the D. IN mode.



| NOTES |

To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.



This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.



This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.



English 15

Settings

The Initial Settings Procedure

• The Home menu will not appear if you do not configure the initial settings.

• The OSD (On Screen Display) may change in this product after you upgrade the software version.

• The access steps may differ depending on the menu you selected.

Turn on your TV after connecting the product, and

then turn on the product. When you turn on the product for the first time, the product automatically displays the Initial Settings Language screen.

Press the ▲▼ buttons to select the desired

language, and then press the E button. Press the E button to start function setup.

Initial Settings

TV Aspect and Network will be set.

Each setting may be changed later under "Settings".

The Network - Wired screen appears.

5 .

- If you have a network with dynamic IP addresses

- and most people do - select Auto, press the

button, and then go to Step 6.

- If you have a network with static IP addresses,

we suggest you select Skip by pressing the BLUE (D) button, and then go to "Configuring Your Network Connection" on page 20 after you have completed the initial setup. "Configuring Your Network Connection" provides a full explanation of how to configure your network connection manually.

- If you have no network, select Skip by pressing the BLUE (D) button. The Initial Settings Complete screen appears, and then the Home screen appears.

| NOTES |

If you skip network setup here or the setup does



not work correctly, you can go to "Configuring Your Network Connection" on page 20 to set up the product's network connection later.

Start

a Previous

The TV Aspect screen appears. Press the ▲▼

" Select

buttons to select a TV Aspect ratio, and then press the E button. You have four choices: 16:9 Original - For widescreen TVs. Displays widescreen pictures in their original 16:9 format and 4:3 pictures (the old, standard format) in 4:3 pillar box format with black bars on the left and right. 16:9 Full - For widescreen TVs. Displays widescreen pictures in their original 16:9 format and expands 4:3 pictures to fill the 16:9 screen. 4:3 Letter Box - For older, standard screen, analog TVs. Displays 4:3 pictures in full screen and 16:9 pictures in letter box format that retains the 16:9 aspect ratio but puts black bars above and below the picture. 4:3 Pan-Scan - For older, standard screen, analog TVs. Displays 4:3 pictures in full screen and 16:9 pictures in Pan-Scan format that fills the screen, but cuts off the left and right sides of the picture and enlarges the middle vertically.

Initial Settings I Network - Wired

Choose the method to configure Internet Protocol (IP).

Please make sure that the Ethernet cable is connected.

Auto : Configure IP automatically.

Manual

Auto

a Previous d Skip

The product verifies the network connection and

< Move "

then connects to the network. When it is done, press the E button. The Initial Settings Complete screen appears, and then the Home screen appears.

Initial Settings I Network - Wired

MAC Address (d0:66:7b:dc:28:fc)



IP Address, Subnet Mask, Gateway, DNS Server



Gateway Ping



Internet Service Test



Your network is operating properly. If you still have a network problem, contact your network service provider.



" Select

Select

16 English

| NOTES |

TOOLS

RETURN

EXIT

INFO

SUBTITLE HOME REPEAT

If you want to display the Initial Setting screen again



and make changes, select the Reset option. (See page 20) If you use an HDMI cable to connect the product to



an Anynet+ (HDMI-CEC)-compliant Samsung TV and

1.) You have set the Anynet+ (HDMI-CEC) feature to ON in both the TV and the product and 2.) You have set the TV to a language supported by the product, the product will select that language as the preferred language automatically.

To select an option on the Home screen, move the

cursor using the

buttons until it highlights

▲▼◄►

the option of your choice, and then press the E button.

| NOTES |

To play or view video, photo, music files located on



your PC, you must connect your home theater and PC to a home network and you must download, install, and configure the DLNA software on your PC. (See page 22.)

04 Settings

The Home Screen

Videos

No Disc a Change Device

Photos Music Settings

App 1 App 2 App 3 App 4

d View Devices "

Enter

Selects Photos.

Selects Videos.

Selects Music.

Selects Settings.

Selects applications.

Displays the buttons you can use on the remote to access functions.

Accessing the Settings Screen

Select Settings on the Home screen, and then

press the E button. The Settings screen appears.

Settings

Display 3D Settings

Audio TV Aspect Ratio : 16:9 Original

Network BD Wise : Off

System Resolution : Auto

Language Movie Frame (24 Fs) : Off

Security HDMI Color Format : Auto

General HDMI Deep Color : Off

Support Progressive Mode : Auto

To access the menus, sub-menus, and options

on the Settings screen, please refer to the remote control illustration below.

| NOTES |

If you leave the product in the stop mode for more



than 5 minutes without using it, a screen saver will appears on your TV. If the product is left in the screen saver mode for more than 20 minutes, the power automatically turns off.

Buttons on the Remote Control Used for the Settings Menu

►

HOME Button : Press to move to the Home

screen.

English 17

Settings

RETURN (') Button : Return to the previous

menu.

(Enter) / DIRECTION Button :

• Press item.

• Press the E button to activate the currently selected item or confirm a setting.

EXIT Button : Press to exit the current menu.

| NOTES |

The E button on the product's front panel can be



used for same purpose as the E button on the remote control.

Detailed Function Information

Each Settings function, menu item, and individual option is explained in detail on-screen. To view an explanation, use the

▲▼◄►

item, or option. The explanation will usually appear on the bottom of the screen. A short description of each Settings function starts on this page. Additional information on some of the functions is also in the Appendix of this manual.

to move the cursor or select an

▲▼◄►

buttons to select the function, menu

Settings Menu Functions

Display

Set up the 3D related functions.



3D Blu-ray Playback Mode: Select whether to play a Bluray Disc with 3D contents in 3D Mode. If you move to the Home or

3D Settings

TV Aspect

Ratio

Smart Hub Home menu while in 3D mode, the product will switch to 2D automatically.

 Screen Size: Enter the size of the

TV attached to the product. The product will automatically adjust the 3D output to the screen size of the TV.

Lets you adjust the output of the product to the screen size of your TV. See page 16, Step 4 for a description of the screen size options.

BD Wise

Resolution

Movie Frame

(24 Fs)

HDMI Color

Format

HDMI Deep

Color

Progressive

Mode

Speaker Settings

BD Wise is Samsung’s latest interconnectivity feature. When you connect a Samsung product and a Samsung TV with BD Wise to each other via HDMI, and BD Wise is on in both the product and TV, the product outputs video at the video resolution and frame rate of the Blu-ray/DVD Disc.

Lets you set the output resolution of the HDMI video signal to

BD Wise, Auto, 1080p, 1080i, 720p, 480p. The number indicates

the number of lines of video per frame. The i and p indicate interlaced and progressive scan, respectively. The more lines, the higher quality.

Setting the Movie Frame (24 Fs) feature to Auto lets the product adjust its HDMI output to 24 frames per second automatically for improved picture quality if attached to a 24Fs compatible TV.

• You can enjoy the Movie Frame (24 Fs) feature only on a TV supporting this frame rate.

• Movie Frame is only available when the product is in the HDMI 1080i or 1080p output resolution modes.

Lets you set the color space format for the HDMI output to match the capabilities of the connected device (TV, monitor, etc).

Lets you set the product to output video from the HDMI OUT jack with deep color. Deep color provides more accurate color reproduction with greater color depth.

Lets you improve picture quality when viewing DVDs.

Audio

Lets you adjust the following speaker settings and turn the test tone on and off so you can test the speakers.

18 English

Speaker

Selection

Audio Return

Channel

Digital Output

Dynamic

Range Control

Level: Lets you adjust the relative

loudness of each speaker from 6db to -6db. For example, if you like deep bass, you can increase the loudness of the subwoofer by 6db.

Distance: Lets you adjust the

relative distance of each speaker from the listening position up to 30 feet. The farther the distance, the louder the speaker will be.

Test Tone: Lets you run the test

tone function so you can test your adjustments. Setting Test Tone to On turns the Test Tone on. Setting it to Off turns it off.

Lets you select which speakers you want active, either the TV's speakers or the home theater's speakers.

Lets you direct the sound from the TV to the home theater speakers. Requires an HDMI connection and an Audio Return Channel (ARC) compatible TV.

• When Audio Return Channel is set to Auto, the home theater automatically selects either ARC or optical input as the audio source, depending on your connections. If Audio Return Channel is active, optical input does not work.

Lets you set the Digital Output to match the capabilities of the AV receiver you’ve connected to the product. For more details, please refer to the digital output selection table. (See page 31)

Lets you apply dynamic range control to Dolby Digital, Dolby Digital Plus, and Dolby TrueHD audio.



Auto: Automatically controls the dynamic range of Dolby TrueHD audio, based on information in the Dolby TrueHD soundtrack. Also turns dynamic range control off for Dolby Digital and Dolby Digital Plus.

 Off: Leaves the dynamic range

uncompressed, letting you hear the original sound.

 On: Turns dynamic range control on

for all three Dolby formats. Quieter sounds are made louder and the volume of loud sounds is reduced.

Audio Sync

Downmixing

Mode

Wired Network Settings

Network Test

Network

Status

BD-Live

Internet

Connection

Initial Settings

Anynet+

(HDMI-CEC)

BD Data

Management

When the product is attached to a digital TV, lets you adjust the audio delay so that the audio syncs with the video. You can set the delay between 0 and 300 milliseconds.

Lets you select the multi-channel downmix method that is compatible with your stereo system. You can choose to have the product downmix to normal stereo or to surround compatible stereo.

Network

For more information about Network Settings and network functions, see "Networks and the Internet" starting on page 20.

Lets you test the Internet Protocol setup to see if it is working correctly.

Lets you check whether a connection to the network and the Internet have been established.

Lets you allow or prohibit an Internet connection for the BD-Live service.

System

Lets you re-run the Initial Settings procedure. See page 16 for details.

Anynet+ is a convenient function that offers linked operations with other Samsung products that have the Anynet+ feature and lets you control those products with one Samsung TV remote. To operate this function, you must connect this product to an Anynet+ Samsung TV using a HDMI cable.

Lets you manage the contents you downloaded through a Blu-ray disc that supports the BD-Live service. You can view the information about the USB device you are using for BD Live data storage including the storage space. You can also delete BD Live data and change the device.

04 Settings

English 19

Settings

Language

You can select the language you prefer for the OnScreen Menu, disc menu, etc.

• The selected language will only appear if it is supported on the disc.

Security

The default PIN is 0000. Enter the default PIN to access the security function if you haven't created your own PIN.

Prevents playback of Blu-ray Discs

BD Parental

Rating

with a rating equal to or above a specific age ratings unless the PIN is entered.

DVD Parental

Rating

Change PIN

Prevents playback of DVDs with a rating above a specific numerical rating unless the PIN is entered.

Changes the 4-digit PIN used to access security functions.

General

Time Zone

You can specify the time zone that is applicable to your area.

Support

Software Upgrade

Contact

Samsung

Terms of

Service

Agreement

For more information about the Software Upgrade function, see "Upgrading Software" on page 21.

Provides contact information for assistance with your product.

View the general disclaimer regarding third party contents and services.

All settings will revert to the default

Reset

except for the network settings. The default security password is 0000.

Networks and the Internet

When you connect this product to a network, you can use network based applications and functions such as BD-LIVE and upgrade the product's software through the network connection.

Configuring Your Network Connection

If you skipped network setup during the Initial Setup, follow the instructions below to configure the home theater's network connection.

Before you begin, contact your ISP to find out if your IP address is static or dynamic. If it is dynamic, we recommend you use the automatic procedure below. If it is static, you must use the manual procedure that follows.

• Before you begin, confirm that the product is connected to your router with a network cable.



Automatic

To start the configuration process, follow these steps:

In the Home menu, select Settings, and then press

the E button. Select Network, and then press the E button.

Select Wired Network Settings, and then press

the E button. The Wired Network Settings screen appears.

Press the ► button on the Internet Protocol Setup

menu. Use

button to select Auto, and then press the

▲▼

button.

Settings

Display

Audio

Network

System

Language

Security

General

Support

The Network function acquires and fills in the values

for IP Address, Subnet Mask, etc., automatically. After the Network function has acquired the network

values, press the RETURN (') button. Select Network Test, and then press E. The

home theater validates the network connection. When it is done, press the RETURN (') button.



Manual

If you have a static IP address or the Automatic procedure does not work, you’ll need to set the Network Settings values manually. You can get the Network Settings from your Internet Service Provider (ISP).

Wired Network Settings

Internet Protocol Setup : Auto

IP Address : 0 0 0 0

Subnet Mask :

Gateway :

DNS : Auto

DNS Server : 0 0 0 0

> Move "

0 0 0

Select '



Return

20 English

Settings

Display

Audio

Network

System

Language

Security

General

Support

Follow the first four steps in the Automatic

Wired Network Settings

Internet Protocol Setup : Manual 

IP Address :

Subnet Mask :

Gateway :

DNS : Manual

DNS Server :

> Move "

0 0 0

255

255 255 0

0 0 0

Select '

Return

procedure, but select Manual instead of Auto in Step 4.

Press the ▼ button to go to the first entry field (IP

Address). Use the number buttons on your remote to enter

numbers. When done with each field, use the ► button to

move successively to the next field. You can also use the other arrow buttons to move up, down, and back.

Enter the IP Address, Subnet Mask, and Gateway

values. Press the ▼ button to go to DNS.

Press the ▼ button to go to the first DNS entry field.

Enter the numbers as above. Press the RETURN (') button on your remote.

Select Network Test, and then press E. When the

test is completed, press the RETURN (') button to exit to the previous screen.

Select Network Status, and then press E.

10.

The Network Status screen appears.

11.

The product verifies the network connection and then connects to the network. When it is done, highlight OK, and then press E.

Upgrading Software

The Software Upgrade menu allows you to upgrade the product’s software for performance improvements or additional services.

• Never turn the product off or back on manually during the update process.

In the Home menu, select Settings, and then press

the E button. Select Support, and then press the E button.

Select Software Upgrade, and then press the E

button.

Select one of the following methods:

• By Online

• By USB

• Auto Upgrade Notification Press the E button.

Directions for each method begin below.

| NOTES |

The update is complete when the product turns off



after restarting. Press the POWER button to turn on the updated product for your use. Never turn the product on or off manually during the update process. Samsung Electronics takes no legal responsibility for



product malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade. If you want to cancel the upgrade while the upgrade



software is downloading, press the E button.

By Online

Your product must be connected to the Internet to use the By Online function. Remove all discs before you begin.

Select By Online, and then press the E button.

The Connecting to Server message appears. If an update is available, a popup message appears

asking if you want to upgrade. If you select Yes , the product turns off automatically, turns on, and then begins the upgrade.

| IMPORTANT |

Never turn the home theater on or off manually during



a software upgrade.

The update progress popup appears. When

the update is completed, the product turns off automatically again.

Press the POWER button to turn on the product.

| NOTES |

The update is complete when the product turns off



after restarting. Press the POWER button to turn on the updated product for your use. Never turn the product off or on manually during the



update process. Samsung Electronics takes no legal responsibility for



a product malfunction caused by an unstable internet connection or consumer negligence during software upgrade.

By USB

Visit www.samsung.com.

Click SUPPORT on the top right of the page.

04 Settings

English 21

Settings

Enter the product's model number into the search

field. As you enter the model number, a drop down will display products that match the model number.

Left click your product's model number in the drop

down list. On the page that appears, scroll down to and then

click Firmware Manuals & Downloads. Click Firmware in the center of the page.

Click the ZIP icon in the File column on the right

side of the page. Click Send in the first pop-up that appears. Click

OK in the second pop-up to download and save the

firmware file to your PC. Unzip the zip archive to your computer. You should

have a single folder with the same name as the zip file.

Copy the folder to a USB flash drive.

10.

Make sure no disc is inserted in the product, and

11.

then insert the USB flash drive into the USB port of the product.

In the product’s menu, go to Settings > Support >

12.

Software Upgrade. Select By USB.

13.

| NOTES |

There should be no disc in the product when you



upgrade the software using the USB Host jack. Never turn the product off or on manually during the



update process. When the software upgrade is done, check the



software details in the Software Upgrade menu.

Auto Upgrade Notification

If your product is connected to the network and you set Auto Upgrade Notification on, the product will notify you if a new software version is available with a pop-up message.

Turn on the product.

In the Software Upgrade menu, set Auto Upgrade

Notification to On.

If there is a new software version available, the product will notify you with a pop-up message.

To upgrade the firmware, select Ye s. The product

turns off automatically, turns on, and then begins the upgrade.

The update progress popup will appear. When

the update is complete, the product will turn off automatically again.

Press the POWER button to turn on the product.

| NOTES |

The update is complete when the product turns off



a product malfunction caused by an unstable Internet connection or consumer negligence during software upgrade.

Setting Up DLNA

DLNA enables you to play music, video and photo files located in your PC using this product. To use DLNA, you must connect the product to your PC via the network (See page 14) and install the SAMSUNG PC Share Manager on the PC.

To Download the DLNA Software

To use DLNA with your PC, you must install DLNA software on your PC. You can download the PC software and get detailed instructions for using DLNA from the Samsung.com website.

Go to www.samsung.com.

Click SUPPORT at the top of the page.

Enter the product's model number into the search

field. As you enter the model number, a drop down will display products that match the model number.

Left click your product's model number in the drop

down list. On the page that appears, scroll down to and then

click Firmware Manuals & Downloads. Click the Software tab.

On the software tab, click the EXE icon on the right

side of the DLNA line. In the first pop-up that appears, click Send. In the

second pop-up, click Save File. Find the DLNA install file on your disk, and then

double click the file. In the pop-up that appears, click Run, and then

10.

follow the directions that appear on your screen.

Download the DLNA Installation/Instruction manual from the same Software Tab by clicking the corresponding PDF file symbol in the File column on the right. The file, in PDF format, will download and open. Follow the directions to install and setup DLNA. You can view and/or save the file.

| NOTES |

To use DLNA with your smartphone, you need to



connect your set & smartphone to the same router.

22 English

Media Play

Playing Files on a USB Device

You can play multimedia files located on a connected USB device.

Move to the Home menu.

In Stop mode, connect the USB storage device to

the USB port on the front panel of the product. The message “Do you want to access the device?” is displayed.

Press the ◄► button to select Yes , then press the

button.

Press the RED (A) button.

Videos Photos Music

USB Flash Disk

CD a Change Device

Press the ▲▼ buttons to select USB Flash Memory

App 2 App 3 App 4

d View Devices "

or USB Flash Disc, and then press the E button. Press the ◄► buttons to select Videos, Photos or

Music, then press the E button.

If files appear on the screen go to Step 8. If file

folders appear on the screen, use the ▲▼◄► buttons to select a folder, press E, and then go to Step 8.

Use the ▲▼◄► buttons to select a file to play or

view, and then press the E button.

-1

. Press the BLUE (D) button.

App 1 App 2 App 3 App 4

USB Flash Disk

d Home "

5-1. Press the ◄► buttons to select USB Flash Memory

or USB Flash Disc, and then press the E button.

Settings

Enter

Settings

Enter USB Flash Disk

6-1. Press the ▲▼ buttons to select Videos, Photos or

Music, then press the E button.

-1

. If files appear on the screen go to Step 8-1. If file

folders appear on the screen, use the ▲▼◄► buttons to select a folder, press E, and then go to

-1

Step 8

-1

. Use the ▲▼◄► buttons to select a file to play or

view, and then press the E button.

| NOTES |

3D file playback is not supported.



To prevent possible damage to the USB memory,



you must remove the USB storage device safely using the “Safely Remove USB” function. Press the

HOME button to move to the Home menu, select the YELLOW (C) button, and then press the E button.

Playing a Disc with User Recorded Content

You can play multimedia files you have recorded on DVD or CD discs.

Turn on the home theater.

Open the disc tray, place a user recorded disc into the

disc tray with the disc’s label facing up, and then close the tray.

After the disc loads, press the RED (A) button.

Press the ▲▼◄► buttons to select CD or DVD,

and then press the E button. Press the ▲▼ buttons to select Videos, Photos or

Music, then press the E button.

If files appear on the screen, go to Step 7. If file

folders appear on the screen, use the ▲▼◄► buttons to select a folder, press E, and then go to Step 7.

Use the ▲▼◄► buttons to select a file to play or

view, and then press the E button.

-1

. After the disc loads, press the BLUE (D) button.

-1

. Press the ◄► buttons to select

then press the E button.

-1

. Press the ▲▼ buttons to select Videos, Photos or

Music, and then press the E button.

-1

. If files appear on the screen go to Step 7-1. If file

folders appear on the screen, use the ▲▼◄► buttons to select a folder, press E, and then go to Step 7-1.

-1

. Use the ▲▼◄► buttons to select a file to play or

view, and then press the E button.

CD or DVD

, and

05 Media Play

English 23

+ 53 hidden pages