Samsung 453, 457, 452 User Manual
LCD TV
Installation manual
452/453/457
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model Serial No.
LC452_453_457-hotel.indd 1 2010-04-12 오후 8:37:19
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
Instruction
This TV is provided with interactive functionality through a set-back box (SBB/STB) connected to the TV, and with other TVs in a computer controlled
system for hotels and other hospitality businesses.
Interactive : When the TV is powered-up initially, it sends a command to identify the SBB/STB; if identified, theTV switches to ONLINE mode and full
control is through the SBB/STB.
If the TV is in ONLINE mode, it stops receiving IR(Samsung remote) commands and acts according to interface protocol.
Stand-Alone: If SBB/STB is not identified, the TV should be switched to STAND-ALONE mode with restricted operation.
Operational Modes
When this TV (in Hotel mode) is operated with a SBB/STB, it is in one of two states
• ONLINE or STAND-ALONE. In the STAND-ALONE state, the TV will act as a Hotel TV, but without active communication. This is to prevent guests
from trying to cheat the system by disconnecting the SBB/STB.
Power
ON
Hotel Mode On
Hotel Mode Off
Hotel TV
SBB/STB Onlineif one
success within 10
attempts
Normal TV
SBB/STB
Online-10
consecutive
fails
Stand-alone
Mode
SBB/STB
StatusAttempt
every 2secs
Online Mode
Poll Rate 20/sec
To set the details for Stand-alone or interactive mode, refer to pages 22-25(Setting the hotel option data : Stand-alone mode and Interactive mode)
• Some operations may be restricted to prevents guests from "cheating" the TV system.
• No main menu(Interactive mode) or Channel Menu, Plug & Play in Main Menu(Stand-Alone mode)
• Limited Volume and Panel key lock or unlock
Still image warning
Avoid displaying still images (like jpeg picture files) or still image element (like TV Program logo, panorama or 4:3 image format, stock or news bar at screen
bottom etc.) on the screen. Constant displaying of still picture can cause uneven wear of screen phosphor, which will affect image quality. To reduce risk of
this effect, please follow below recommendations:
• Avoid displaying the same TV channel for long periods.
• Always try do display any image on full screen, use TV set picture format menu for best possible match.
• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.
• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
✎
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
x
The appearance may differ depending on the product.
✎
Installation with a stand. Installation with a wall-mount.
10 cm
10 cm10 cm
LC452_453_457-hotel.indd 2 2010-04-12 오후 8:37:20
10 cm
10 cm10 cm
10 cm
Contents
y Accessories .............................................................................................................................................................. 4
y Install the Stand ........................................................................................................................................................4
y How to Adjust the Stand (19inch model only) ............................................................................................................ 5
y How to Adjust the Angle of the TV (19inch model only) ............................................................................................. 5
y Installing VESA Compliant Mounting Devices (19inch model only) ............................................................................. 6
y Using the Decoration Covers (19inch model only) ..................................................................................................... 6
y Installing the LCD TV Stand (19inch model only) ...................................................................................................... 7
y Viewing the Connection Panel ................................................................................................................................... 8
y Viewing the Control Panel ....................................................................................................................................... 12
y Viewing the Remote Control .................................................................................................................................... 13
y Connecting the Bathroom Speakers ....................................................................................................................... 17
y Installing the Wall Mount ......................................................................................................................................... 35
y Securing the TV to the Wall .................................................................................................................................... 36
y Assembling the Cables ........................................................................................................................................... 36
y Anti-theft Kensington Lock ...................................................................................................................................... 37
y Specifications ......................................................................................................................................................... 37
ENGLISH
English
LC452_453_457-hotel.indd 3 2010-04-12 오후 8:37:20
3
Accessories
✎
Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
✎
The items’ colour and shapes may vary depending on the models.
y Remote Control & Batteries (AAA x 2)
y Owner’s Instructions
y Warranty Card / Safety Guide / Registration Cards (Not available in all locations)
Blanking Bracket
✎
The stand and stand screw may not be included depending on the model.
✎
The Data Cable may not be included depending on the SI Vendor.
Install the Stand
y Cleaning Cloth
y Power Cord / Data Cable
✎
Preset: Place the Guide Stand and Cover Neck onto
the stand and fasten it using the screws.
1. Attach your LCD TV to the stand.
✎
Two or more people should carry the TV.
✎
Make sure to distinguish between the front and
back of the stand when assembling them.
✎
To make sure the TV is installed on the stand at
a proper level, do not apply excess downward
pressure to the upper left of right sides of the
TV.
2. Fasten two screws at position
screw at position 2.
✎
Stand the product up and fasten the screws. If
you fasten the screws with the LCD TV placed
down, it may lean to one side.
✎
The stand is installed for models with the
screen size of 37 inch and above.
1
and then fasten two
English
4
LC452_453_457-hotel.indd 4 2010-04-12 오후 8:37:21
How to Adjust the Stand (19inch model only)
1. Place the front of the TV onto a soft cloth or
cushion on a table as in Figure 1.
✎
Align the TV bottom along the table edge.
1
2
2. Press on the center of the TV back. Adjust the
stand as in Figure
✎
pressing the button on the back of the stand.
3. Place the TV on the table so that the TV sits safely
on the table.
2
while
How to Adjust the Angle of the TV (19inch model only)
✎
When you adjust the stand, press the button on the
back of the stand.
1
Angle adjustment
when using the TV
on its stand.
1. Figure
2. Figure 2 shows the adjustment angle (14°~80°)
1
when you use the LCD on its stand. Excessive
tilting can turn the LCD TV over which may cause
damage.
when you convert the LCD from stand-based use
to wall-mount.
shows the adjustment angle (-2°~14°)
2
Angle adjustment when
converting from Stand to Wall
mount (1→3, 3→1)
3. Figure 3 shows the adjustment angle (0°~10°)
when you mount the LCD TV to a wall.
✎
You will hear a "Click" sound when changing
the angle from 1 to 2 or 3 to 2.
3
Angle adjustment
when LCD TV is
wall-mounted
English
LC452_453_457-hotel.indd 5 2010-04-12 오후 8:37:22
5
Installing VESA Compliant Mounting Devices (19inch model only)
Button
1
Mounting pad
(Sold separately)
2
1. Place the TV face down on a soft cloth or cushion
on a table.
2. Adjust the stand, pressing the button on the back
of the stand.
3. Align the mounting interface pad (not supplied) with
the holes in the stand bottom and secure it with the
four screws that come with the arm-type base, wall
mount hanger or other bases (not supplied).
Using the Decoration Covers (19inch model only)
1. When installing the TV on the wall without using the
stand, insert decoration covers into the holes as
described in the picture 1.
6
English
1
2
2. After inserting the decoration covers, fasten them
with 4 screws as described in the picture
2
.
LC452_453_457-hotel.indd 6 2010-04-12 오후 8:37:23
Installing the LCD TV Stand (19inch model only)
If any items are missing, contact your dealer.
✎
When installing the stand, use the provided components and parts.
ⓐ Screws: 3EA ⓑ Screws: 4EA
Stand
1
3
Back
1. Insert the Cover Neck into the groove of the stand. Assemble the LCD TV stand by aligning the triangle
figures indicated by the arrow marks.
2. Place the Guide Stand onto the stand which is assembled in step 1 and fasten it using the three
3. Connect your LCD TV and the stand.
4. Fasten two
ⓑ
screws at position 1 and then fasten two 1 screws at position
Cover Neck Guide Stand
2
Front
4
Position
Front
Position
Screws
Back
2
1
ⓐ
screws.
.
2
Caution
LC452_453_457-hotel.indd 7 2010-04-12 오후 8:37:24
✎
Make sure to distinguish between the front and back of each component when assembling them.
✎
Make sure that at least two persons lift and move the LCD TV.
✎
Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down,
it may lean to one side.
English
7
Viewing the Connection Panel
LE32C452C4HXXC
LE32C453C4HXXC
LA32C457C6HXZN
LA37C457C6HXZN
LA40C457C6HXZN
LE32C457C6HXXC
LE37C457C6HXXC
LE40C457C6HXXC
Power Input
3
21
ANT IN
#
1 32 4 765
ANT IN
(12Vdc/1.5A)
5Vdc/2.5A
74 6
HDMI IN3
4
8
9
0!@$%
HDMI IN3
4
8
9
LE26C452C4HXXC
LE26C453C4HXXC
LA26C457C6HXZN
English
8
Power Input
Power Input
#
$%
1 32 4 76
ANT IN
#
0!@
HDMI IN3
4
8
0!@$%
9
LC452_453_457-hotel.indd 8 2010-04-12 오후 8:37:25
LE26C457C6HXXC
3
2
1
4 7
ANT IN
5Vdc/2.5A
(12Vdc/1.5A)
65
HDMI IN3
4
8
9
Power Input
0!@$%
LE19C452C4HXXC
LE19C453C4HXXC
$ 8
#
4 6 7
LE22C452C4HXXC
LE22C453C4HXXC
LE22C457C6HXXC
AV IN
9
3
Power Input
@#
✎
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
✎
When connecting an external device, match the color of the connection terminal to the cable.
0
1 VARIABLE AUDIO OUT: Used for the audio output to the Bathroom speaker. Connect the Bathroom Wall Box and the
Variable port (RCA). (Not available for 19/22 inch model.)
2 VOL-CTRL: Used to control the volume of the Bathroom speaker. Connect the Bathroom Wall Box and the VOL-CTRL
port.
3 ANT IN: To view television channels correctly, a signal must be received by the set from one of the following sources. An
outdoor antenna / A cable television network / A satellite network.
✎
For Norway: Utstyr som er koplet til beskyttelsesjord via nettplugg oq/eller via annet jordtilkoplet utstyr-og er tilkoplet
et kabel-TV nett, kan forårsake brannfare. For å unngå dette skal det ved tilkopling av utstyret til kabel-TV nettet
installeres en galvanisk isolator mellom utstyret og kabel-TV nettet.
✎
For Sweden: Utrustning som är kopplad till skyddsjord via jordat vägguttag och/eller via annan utrustning och
samtidigt är kopplad till kabel-TV nät kan i vissa fall medfőra risk főr brand. For att undvika detta skall vid anslutning
av utrustningen till kabel-TV nät galvanisk isolator finnas mellan utrustningen och kabel-TV nätet.
4 HDMI IN 1(DVI), 2, 3: Connects to the HDMI jack of a device with an HDMI output.
✎
No sound connection is needed for an HDMI to HDMI connection.
✎
Use the HDMI IN 1 jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter
(DVI to HDMI) for video connection and the PC/DVI AUDIO IN jacks for audio.
5 5V DC/2.5A (12V DC/1.5A): Used to supply power for the SBB or STB. (Available for B457 26/32/37 inch model only.)
6 PC/DVI AUDIO IN: connect to the audio output jack on your PC
English
LC452_453_457-hotel.indd 9 2010-04-12 오후 8:37:26
9
7 PC IN: Connect to the video output jack on your PC.
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The resolutions in the table are recommended.
✎
Optimal resolution is 1360 X 768 @ 60 Hz. (Only for 19" 22" 26" 32" models)
Mode Resolution
IBM
MAC
VESA CVT
VESA DMT
VESA GTF
✎
Optimal resolution is 1920 X 1080 @ 60 Hz. (Only for 37“ 40” models)
Mode Resolution
IBM
MAC
VESA CVT
VESA DMT
VESA GTF
VESA DMT / DTV CEA
640 x 350
720 x 400
640 x 480
832 x 624
720 x 576
1280 x 720
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 720
1360 x 768
1280 x 720 52.500 70.000 89.040 -/+
640 x 350
720 x 400
640 x 480
832 x 624
1152 x 870
720 x 576
1152 x 864
1280 x 720
1280 x 960
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 720
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
1280 x 720
1280 x 1024
1920 x 1080p 67.500 60.000 148.500 +/+
Horizontal Frequency
(KHz)
31.469
31.469
35.000
49.726
35.910
56.456
31.469
37.500
37.861
37.879
46.875
48.077
48.363
56.476
60.023
45.000
47.712
Horizontal Frequency
(KHz)
31.469
31.469
35.000
49.726
68.681
35.910
53.783
56.456
75.231
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
45.000
49.702
62.795
60.000
47.712
55.935
70.635
65.290
52.500
74.620
Vertical Frequency
(Hz)
70.086
70.087
66.667
74.551
59.950
74.777
59.940
75.000
72.809
60.317
75.000
72.188
60.004
70.069
75.029
60.000
60.015
Vertical Frequency
(Hz)
70.086
70.087
66.667
74.551
75.062
59.950
59.959
74.777
74.857
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
60.000
59.810
74.934
60.000
60.015
59.887
74.984
59.954
70.000
70.000
Pixel Clock Frequency
Pixel Clock
Frequency
(MHz)
25.175
28.322
30.240
57.284
32.750
95.750
25.175
31.500
31.500
40.000
49.500
50.000
65.000
75.000
78.750
74.250
85.500
(MHz)
25.175
28.322
30.240
57.284
100.000
32.750
81.750
95.750
130.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
74.250
83.500
106.500
108.000
85.500
106.500
136.750
146.250
89.040
128.943
Sync Polarity
(H / V)
+/-
-/+
-/-
-/-
-/+
-/+
-/-
-/-
-/+/+
+/+
+/+
-/-
-/+/+
+/+
+/+
Sync Polarity
(H / V)
+/-
-/+
-/-
-/-
-/-
-/+
-/+
-/+
-/+
-/-
-/-
-/+/+
+/+
+/+
-/-
-/+/+
+/+
+/+
+/+
+/+
-/+
-/+
+/+
+/+
-/+
-/+
-/+
-/+
-/-
English
10
LC452_453_457-hotel.indd 10 2010-04-12 오후 8:37:27
✎
When using an HDMI / DVI cable connection, you must use the HDMI (DVI) IN 1 jack.
✎
The interlace mode is not supported.
✎
The set might operate abnormally if a non-standard video format is selected.
✎
Separate and Composite modes are supported. SOG is not supported.
8 USB (HDD) / CLONING
– Connector for software upgrades and Media Play, etc.
– Service connection.
9 AV IN 1, 2
– Connect a VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
– Connect audio cables to [R-AUDIO-L] on your TV and the other ends to corresponding audio out jacks on the A/V device.
0 DATA
– Used to support data communication between the TV and the SBB.
– The TV jack type is RJ-12.
! RJP: This port is an RJP (Remote Jack Pack) communication port that enables connecting different devices to additional
module so as to improve device use convenience.
@ COMPONENT IN
– Connects Component video / audio.
– Connect component video cables (optional) to the component jacks ("PR", "PB", "Y") on the rear of your TV and the
other ends to corresponding component video out jacks on the DVD.
– If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD and connect
the DVD to the component jacks ("PR", "PB", "Y") on your TV.
– The PR, PB and Y jacks on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
– Connect RCA audio cables (optional) to [R - AUDIO - L] on the rear of the TV set and the other ends to corresponding
audio out jacks on the DVD.
# EXT
Connector
EXT 0 0 0 Only TV or DTV output is available
✎
Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
$ Headphones jack: Headphones may be connected to the headphone jack on your TV. While the headphones are
connected, the sound from the built-in speakers will be disabled.
% HP-ID: Enables to identify whether a headphone jack is inserted into the additionally created head phone box.
Video Audio (L/R) RGB Video + Audio (L/R)
Input Output
English
11
LC452_453_457-hotel.indd 11 2010-04-12 오후 8:37:27
Viewing the Control Panel
✎
The product colour and shape may vary depending on the model.
Speakers
Remote control sensor
Power Indicator
SOURCE
MENU Displays an on-screen menu, the OSD (on screen display), of your TV’s features.
y
z
P
Remote control sensor Aim the remote control towards this spot on the TV.
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
E
(Power)
Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTERE button on the remote control.
Adjusts the volume. In the OSD, use the
and ► buttons on the remote control.
Changes the channels. In the OSD, use the
▼ and ▲ buttons on the remote control.
Turns the TV on or off.
y
z
buttons as you would use the ◄
buttons as you would use the
English
12
LC452_453_457-hotel.indd 12 2010-04-12 오후 8:37:27
Loading...