Samsung 460MPX, 400MPX User Manual

LCD MONITOR

quick start guide

400MP 460MP 400MPX 460MPX

ii

Introduction

Package Contents

Note

Please make sure the following items are included with your LCD Display.

If any items are missing,

Contact a local dealer to buy optional items.

This stand is not for the Floor Standing Type.

Unpacking

Manuals

contact your dealer.

Note

LCD Display

Quick Setup Guide Warranty Card

(Not available in all loca-

Cables

D-Sub Cable Power Cord

Others

User's Guide

tions)

Introduction

Others

Remote Control Batteries (AAA X 2)

(Not available in all loca-

BNC to RCA Adaptor Jack

Sold separately

DVI Cable Wall Mount KIT LAN Cable

HDD Cover

tions)

(Applicable to the MPn mod-

el only)

TV tuner box NetWork Box

(Applicable to the MP model

only)

BNC Cable

Note

• You can purchase and connect a separate network box or TV tuner box. For information on how
to use these, refer to their respective user manuals.

• You can only connect one external box.

Semi Stand KIT

Your LCD Display
Front

Introduction

MENU button [MENU]

Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu
or return to the previous menu.

Navigate buttons (Up-Down buttons)

Moves from one menu item to another vertically or adjusts selected menu values.

Adjust buttons (Left-Right buttons) / Volume buttons

Moves from one menu item to another horizontally or adjusts selected menu val­ues. When OSD is not on the screen, push the button to adjust volume.

ENTER button [ENTER]

Activates a highlighted menu item.

SOURCE button [SOURCE]

Switches from PC mode to Video mode. Changing the source is only allowed for
external devices that are connected to the LCD Display at the time.

→ [DVI] → [AV] → [HDMI] → [MagicInfo] → [TV] → [BNC]→ [Com-

[PC]
ponent]

Note

•

The TV menu is available when a TV tuner box is installed.

• The MagicInfo menu is available when a network box is installed in the MPn
or MP model.

D.MENU

Opens the on-screen D.MENU.

Note

•

This is available when a TV tuner box is installed.

Power button [ ]

Rear

Introduction

Use this button for turning the LCD Display on and off.

Power indicator

Shows PowerSaver mode by blinking green

Note

See

PowerSaver described in the manual for further information regarding power
saving functions. For energy conservation, turn your LCD Display OFF when it
is not needed or when leaving it unattended for long periods.

Remote Control Sensor

Aim the remote control towards this spot on the LCD Display.

Note

For detailed information concerning cable connections, refer to Connecting Cables under Setup. The
LCD Display 's configuration at the back may vary slightly depending on the LCD Display model.

POWER S/W ON [

Switches the LCD Display On/Off.

POWER IN

The power cord plugs into the LCD Display and
the wall plug.

│

] / OFF [O]

Introduction

RS232C OUT/IN (RS232C Serial PORT)

MDC(Multiple Display Control) Program Port

DVI / PC / HDMI IN [DVI/PC/HDMI AUDIO
IN] (PC/DVI/HDMI Audio Connection Terminal
(Input))

DVI / PC / HDMI IN [HDMI]

Connect the HDMI terminal at the back of your
LCD Display to the HDMI terminal of your dig­ital output device using a HDMI cable.

DVI / PC / HDMI IN [RGB](PC Video Con­nection Terminal)

Using a D-Sub Cable (15 pin D-Sub) - PC mode
(Analog PC)

DVI / PC / HDMI IN [DVI] (PC Video Con­nection Terminal)

Using a DVI Cable (DVI-D to DVI-D) - DVI
mode (Digital PC)

DC OUT [5V/1.5A]

Connect this to the POWER connector of a TV

tuner box or network box.

AV IN [VIDEO] (VIDEO Connection Termi­nal)

Connect the [ VIDEO ] terminal of your monitor
to the video output terminal of the external device
using a VIDEO cable.

AV AUDIO IN [L-AUDIO-R](LCD Display
Audio Connection Terminal (Input))

AV AUDIO OUT [L-AUDIO-R] (LCD Dis­play Audio Connection Terminal (Output))

Introduction

BNC/COMPONENT OUT[R/PR, G/Y, B/PB,
H, V]

(BNC/Component Connection Terminal (Out­put))

BNC (Analog PC) Connection: connecting the R,
G, B, H, V ports.

Component Connection: connecting the PR, Y,
PB ports.

BNC/COMPONENT IN[R/PR, G/Y, B/PB, H,
V]

(BNC/Component Connection Terminal (Input))

RGB OUT

(Applicable to the MPn model only)

LAN (LAN Connection Terminal)

(Applicable to the MPn model only)

USB(USB Connection Terminal)

Keyboard / Mouse, Mass Storage Device Com­patible.

(Applicable to the MPn model only)

Note

The number of LCD Displays that can be con­nected to loopout may differ depending on the
cables, signal source etc. With cables where there
is no degradation or signal source, up to ten LCD
Displays can be connected.

Introduction

Kensington Lock

The Kensington Lock is a device used to physi­cally fix the system when using it in a public
place. The locking device has to be purchased
separately. The appearance and locking method
may differ from the illustration depending on the
manufacturer. Refer to the manual provided with
the Kensington Lock for proper use. The locking
device has to be purchased separately.

Note

The location of the Kensington Lock may be dif­ferent depending on its model.

Using the Anti-Theft Kensington Lock

1. Insert the locking device into the Kensington

slot on the Monitor and turn it in the

Note

See Connecting Cables

Remote Control

Note

The performance of the remote control may be affected by a TV or other electronic device operating
near the LCD Display , causing a malfunction due to interference with the frequency.

locking direction .

2.

Connect the Kensington Lock cable.

3. Fix the Kensington Lock to a desk or a heavy

stationary object.

for further information regarding cable connections.

Introduction

POWER

OFF

Number Buttons

DEL button

+ VOL -

MUTE

TV/DTV

MENU

INFO

COLOR BUTTONS

TTX/MIX

STILL

AUTO

S.MODE

MDC

LOCK

SOURCE

ENTER/PRE-CH

CH/P

D.MENU

GUIDE

RETURN

Up-Down Left-Right buttons

EXIT

SRS

MagicInfo

P.MODE

POWER

1.

2. Off

3. Number Buttons

DUAL/MTS

PIP
SWAP

Turns the product On.

Turns the product Off.

Press to change the channel.

4. DEL button

Introduction

The "-" button operates only for DTV. It is used to select MMS
(multi-channel) for a DTV.

5. + VOL -

MUTE

6.

7. TV/DTV

8.

MENU

9.

10.

11.COLOR BUTTONS Press to add or delete channels and to store channels to the favorite

12. TTX/MIX

INFO

Adjusts the audio volume.

Pauses (mutes) the audio output temporarily. This is displayed on
the lower left corner of the screen. The audio resumes if MUTE
or - VOL + is pressed in the Mute mode.

Selects the TV and DTV mode directly.

Opens the on-screen menu and exits from the menu or closes the
adjustment menu.

Activates a highlighted menu item.

Current picture information is displayed on the upper left corner
of the screen.

channel list in the “Channel List” menu.

TV channels provide written information services via teletext.

- Teletext Buttons

For more information > TTX / MIX

13.STILL Press the button once to freeze the screen. Press it again to un­freeze.

14.AUTO Adjusts the screen display automatically in PC mode. By changing

the resolution in the control panel, auto function is performed.

15. S.MODE When pressing this button, the current mode is displayed at the
bottom centre of the screen. The LCD Display has a built-in high
fidelity stereo amplifier. Then press the button again to circle

through available preconfigured modes. ( Standard
Movie → Speech → Custom )

16.MDC MDC Quick Launch Button.

17.LOCK Activates or deactivates all function keys on both the remote con­trol and the LCD Display except for the Power and LOCK buttons.

SOURCE

18.

19. ENTER/PRE-CH

CH/P In TV mode, selects TV channels.

20.

Press the button to change the input signal SOURCE.

Changing the SOURCE is only allowed for external devices that
are connected to the monitor at the time.

This button is used to return to the immediately previous channel.

→ Music →

21.D.MENU

22.GUIDE Electronic Program Guide (EPG) display.

23.

RETURN

DTV menu display

Returns to the previous menu.

Introduction

24. Up-Down Left-Right but-

tons

25. EXIT

26.

27.MagicInfo

28. P.MODE When you press this button, current picture mode is displayed on

SRS

Moves from one menu item to another horizontally, vertically or
adjusts selected menu values.

Exits from the menu screen.

Selects SRS TruSurround XT mode.

MagicInfo Quick Launch Button.

the lower center of the screen.

AV / HDMI / TV : P.MODE

The LCD Display has four automatic picture settings that are pre­set at the factory. Then push button again to circle through avail-

able preconfigured modes. ( Dynamic → Standard → Movie →
Custom )

PC / DVI / MagicInfo: M/B (MagicBright)

MagicBright is a feature providing the optimum viewing envi-

ronment depending on the contents of the image you are watching.
Then push button again to circle through available preconfigured

modes. (Entertain → Internet → Text → Custom )

29.

DUAL/MTS

30. PIP Every time you press the button, a PIP screen appears.

31.SWAP Swaps the contents of the PIP and main image. The image in the

DUAL-

STEREO/MONO, DUAL l / DUAL ll and MONO/NICAM
MONO/NICAM STEREO can be operated depending on the
broadcasting type by using the DUAL button on the remote control
while watching TV.

MTS-

You can select MTS (Multichannel Television Stereo) mode.

Audio Type MTS/S_Mode Default

FM Stereo Mono Mono Manual Change

Stereo Mono ↔ Stereo

SAP Mono ↔ SAP Mono

- This fuction does not work for this LCD Display.

PIP window will appear on the main screen, and the main screen
image will appear in the PIP window.

Mechanical Layout(400MP(N))
Mechanical Layout

- This fuction does not work for this LCD Display.

Introduction