Samsung 34A11, 29A20, 32A20, 34A20 User Manual

COLOR TELEVISION

CS29A10/29A11/29A20/29Z6/29Z7 WS32A10/32A11/32A20/32Z6/32Z7 CS34A10/34A11/34A20/34Z6/34Z7

Owner’s Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference.

ON-SCREEN MENUS

PICTURE IN PICTURE

TELETEXT

WISE LINK

(OPTION)

Contents

◆ CONNECTING AND PREPARING YOUR TELEVISION

■ View of Your Television (depending on the model) ....................................... 5

■ Infrared Remote Control (depending on the model) ...................................... 7

■ Inserting the Batteries in the Remote Control................................................ 9

■ Connecting to an Aerial or Cable Television Network ................................... 9

■ Switching Your Television On and Off........................................................... 10

■ Placing Your Television in Standby Mode..................................................... 10

■ Becoming Familiar with the Remote Control ................................................. 11

■ Plug & Play Feature....................................................................................... 12

■ Viewing the Demonstration............................................................................ 13

■ Choosing Your Language.............................................................................. 13

◆ SETTING THE CHANNELS

■ Storing Channels Automatically..................................................................... 14

■ Sorting the Stored Channels ......................................................................... 15

■ Storing Channels Manually............................................................................ 16

■ Skipping Unwanted Channels ....................................................................... 18

■ Assigning Names to Channels ...................................................................... 19

■ Fine Tuning Channel Reception.................................................................... 20

◆ USING YOUR TELEVISION

■ Using the LNA (Low Noise Amplifier) feature (depending on the model) ...... 21

■ Changing the Picture Standard ..................................................................... 21

■ Adjusting the Picture Settings (depending on the model).............................. 22

■ Selecting the Color Tone ............................................................................... 23

■ Selecting the Picture Size (depending on the model).................................... 23

■ Extra Picture Settings (depending on the model).......................................... 24

■ Setting the Blue Screen................................................................................. 25

■ Using the Tilt Control Feature........................................................................ 25

■ Freezing the Current Picture ......................................................................... 26

■ Changing the Sound Standard ...................................................................... 26

■ Adjusting the Sound Settings ........................................................................ 27

■ Extra Sound Settings (depending on the model)........................................... 28

■ Selecting the Melody ..................................................................................... 29

■ Selecting the Sound Mode (depending on the model) .................................. 30

■ Setting and Displaying the Current Time....................................................... 31

■ Setting the Sleep Timer ................................................................................. 32

■ Switching the Television On and Off Automatically ....................................... 33

■ Setting the Preferred Volume Level/Channel ................................................ 34

■ Viewing an External Signal Source/Edit Name (depending on the model).... 35

■ Viewing the Picture In Picture (PIP) (depending on the model) .................... 36

English - 3

Contents (continued)

◆ USING THE WISE LINK (DEPENDING ON THE MODEL)

■ Using Wise Link (depending on the model)................................................... 38

■ Switching to WISE LINK Mode (depending on the model)............................ 40

■

Selecting Image (JPEG) Files/Music (MP3) Files (depending on the model)

■ Picture (JPEG) Playback (depending on the model) ..................................... 42

■ Rotating the Picture (JPEG) (depending on the model) ................................ 43

■ Picture Zoom (JPEG) (depending on the model) .......................................... 43

■ Music File (MP3) Playback (depending on the model) .................................. 44

■ Playback All JPEG/MP3 Files (depending on the model).............................. 45

■ WISE LINK Menu Setup (depending on the model)...................................... 46

◆ USING THE TELETEXT FEATURE

■ Teletext Feature ............................................................................................ 48

■ Displaying the Teletext Information ............................................................... 48

■ Selecting a Page by Number......................................................................... 49

■ Using FLOF to Select a Page........................................................................ 50

■ Storing Teletext Pages .................................................................................. 50

◆ ADDITIONAL INFORMATION ON CONNECTIONS

■ Connecting to the External Input/Outputs...................................................... 51

■ Connecting to the DVD Player (depending on the model)............................. 52

■ Connecting to the Audio Output .................................................................... 53

■ Connecting to the Active Sub Woofer Speaker(depending on the model) .... 53

■ Connecting to the RCA Input......................................................................... 54

■ Connecting to the S-Video Input.................................................................... 54

■ Connecting to the PC Input (depending on the model) ................................. 55

■ Viewing Pictures From External Sources (depending on the model) ............ 56

........... 41

◆ RECOMMENDATIONS FOR USE

■ Automatic Degaussing to Remove Color Patches......................................... 56

■ Troubleshooting: Before Contacting Service Personnel................................ 57

Symbols

Press Important Note

English - 4

☛

➢

View of Your Television (depending on the model)

4567

10 9 8

67 2 31

The actual configuration on your TV may be different, depending on

➢

your model.

Control Panels

1) Standby Indicator

2) Remote Control Sensor

3) Power On/Off

4) Channel Selection

W.LINK Mode

8) MOVE :

9) :

☛

Used to move between items.

Used to execute the selected item.

You can use the Volume button on the remote control to control the volume while in Wise Link mode. (You cannot control the volume on the front control panel of TV.)

5) Volume Adjustment

6) Menu Display

7) Input Source Selection

10) :

11) Memory Card Slot :

Used to move to the previous page.

memory card into the slot.

Insert the

English - 5

View of Your Television (depending on the model) (continued)

Connection Panels

Side of the TV (depending on the model)

Audio Input (R, L)

Video Input

S-Video Input

PC Video Input

Rear of the TV (depending on the model)

MONITOR OUT (VIDEO / L-AUDIO-R) Outputs for external devices.

AV-1 INPUT (VCR) -VIDEO/AUDIO(L/R) AV 2 INPUT(VCR) -VIDEO/AUDIO(L/R)

Inputs or outputs for external devices, such as VCR, DVD, video game device, or video disc players.

ˇ COMPONENT 1 INPUT (DVD)/

COMPONENT 2 INPUT (DVD)

VIDEO (Y/PB/PR) and AUDIO (L/R) inputs for Component.

Available format for Component inputs ;

➢

480i, 480p, 576i, 576p, 1080i - 50Hz

¨ VHF/UHF (75Ω)

75Ω Coaxial connector for Aerial/Cable Network.

ˆ SCART- EXT 1(RGB)/EXT 2(AV)

Inputs or outputs for external devices, such as VCR, DVD, video game device, or video disc players.

MONITOR AUDIO OUT

Audio Output for external devices.

∏

SUB-WOOFER SPEAKER OUT

Connect for active subwoofer speaker.

English - 6

Infrared Remote Control (depending on the model)

TELEVISION STAND-BY

PICTURE SIZE SELECTION

SOUND MODE SELECTION

DIRECT CHANNEL SELECTION

ONE/TWO-DIGIT

CHANNEL SELECTION

VOLUME INCREASE

TEMPORARY SOUND SWITCH-OFF

VOLUME DECREASE

MENU DISPLAY

MOVE TO THE REQUIRED

ADJUST AN OPTION VALUE

MENU OPTION/

RESPECTIVELY

SOUND MENU DISPLAY

TURBO SOUND

AUTOMATIC SWITCH-OFF

SWITCH REPEATEDLY BETWEEN THE LAST TWO CHANNELS DISPLAYED

NEXT CHANNEL

EXTERNAL INPUT SELECTION

PREVIOUS CHANNEL

INFORMATION DISPLAY SETUP MENU DISPLAY(W.LINK)

(depending on the model)

EXIT FROM ANY DISPLAY RETURN TO PREVIOUS MENU(W.LINK)

(depending on the model)

CHANGE CONFIRMATION

SOUND EFFECT SELECTION

PICTURE EFFECT SELECTION

STILL PICTURE

DNIe ON/OFF/DEMO

(depending on the model)

➢

W.LINK FUNCTION:

- ROTATE

- ZOOM

- REWIND

- STOP

- PLAY/PAUSE

- FASR FORWARD

- W.LINK: TOGGLES BETWEEN WISE LINK AND TV MODE.

The performance of the remote control may be affected by bright light.

(depending on the model)

English - 7

Infrared Remote Control (depending on the model) (continued)

TELETEXT DISPLAY/ MIX BOTH TELETEXT INFORMATION

TELETEXT SIZE SELECTION

AND THE NORMAL BROADCAST

TELETEXT SUB-PAGE

TELETEXT PAGE HOLD

SUB PICTURE(PIP)

NEXT CHANNEL

PIP ON/OFF

PROGRAMME

SELECTION BY NAME

SUB PICTURE(PIP)

LOCATION SELECTION

TELETEXT STORE

TELETEXT NEXT PAGE

TELETEXT MODE SELECTION (LIST/FLOF)

TELETEXT PREVIOUS PAGE

TELETEXT REVEAL

EXIT FROM ANY DISPLAY

SUB PICTURE(PIP) SIZE SELECTION

SUB PICTURE(PIP) PREVIOUS CHANNEL

FASTEXT TOPIC SELECTION

SUB PICTURE(PIP)

SOURCE SELECTION

English - 8

INTERCHANGE THE MAIN AND SUB PICTURE (PIP)

Inserting the Batteries in the Remote Control

You must insert or replace the batteries in the remote control when you:

◆ Purchase the television

◆ Find that the remote control is no longer operating

correctly

1 Remove the cover on the rear of the remote control by pressing

the symbol ( ) downwards, then pulling firmly to remove it.

2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking

care to respect the polarities:

◆-on the battery against -on the remote control

◆+on the battery against +on the remote control

3 Replace the cover by aligning it with the base of the remote

control and pressing it back into place.

Do not mix battery types, i.e. alkaline and manganese.

➢

Connecting to an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:

◆ An outdoor aerial

◆ A cable television network

◆ A satellite network

1 In the first three cases, connect the aerial or network input cable to

the 75Ω coaxial socket on the rear of the television.

2 If you are using an indoor aerial, you may need to turn it when

tuning your television until you obtain a picture that is both sharp and clear. For further details, refer to:

◆ “Storing Channels Automatically ” on page 14

◆ “Storing Channels Manually” on page 16

Rear of the TV

Cable Television

Network

English - 9

Switching Your Television On and Off

The mains lead is attached to the rear of your television.

1 Plug the mains lead into an appropriate socket.

The main voltage is indicated on the rear of the television

➢

and the frequency is 50 or 60Hz.

2 Press the “ ” button (On/Off) on the front of the television.

Result

: The Standby indicator on the front of the television

lights up.

3 Press the POWER () button on the remote control to switch the

television on.

Result

: The programme that you were watching last is re-

selected automatically.

If you have not yet stored any channels, No clear picture

➢

appears. Refer to “Storing Channels Automatically” on page 14 or “Storing Channels Manually” on page 16.

4 To switch your television off, press the “ ” button (On/Off) again.

Placing Your Television in Standby Mode

Your television can be placed in Standby mode, in order to reduce:

◆ Power consumption

◆ Wear of the cathode ray tube

The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1 Press the POWER () button on the remote control.

Result

: The screen is turned off and the Standby indicator on

the front of the television lights up in red.

2 To switch the television back on, simply press the POWER ()

button again.

You can also switch on by pressing the P or button.

➢

Do not leave your television in Standby mode for long

☛

periods of time (when you are away on holiday, for example). Turn your television off by pressing the “ ” button (On/Off) on the front of the television. It is best to unplug the set from the mains and aerial.

English - 10

Becoming Familiar with the Remote Control

The remote control is used mainly to:

◆ Change channels and adjust the volume

◆ Set up the television using the on-screen menu system

The following table presents the most frequently used buttons and their functions.

Button Viewing Function Menu Function

Used to display the next stored channel.

Used to display the previous stored channel.

to Used to display the corresponding channels.

-/--

PRE-CH Press the PRE-CH

MUTE Used to switch the sound off temporarily.

Used to select a channel numbered ten or over. Press this button, and the “ Enter the two-digit channel number.

()

last channel viewed. To quickly switch between two channels that are far apart,

tune to one channel, then use the number button to select second channel. Then, use the PRE-CH quickly alternate between them.

Used to increase the volume.

Used to decrease the volume.

To turn the sound back on, press this button again, or

➢

press the or button.

” symbol is displayed.

button. The TV will switch to the

()

button to

MENU Used to display the Used to return to the previous

EXIT

TV Used to switch the Used to exit from the menu

on-screen menu system. menu or normal viewing.

television on when it is system and return to normal in Standby mode. viewing directly

Used to:

◆ Display a submenu containing selections for the current menu option

◆ Increase/decrease a menu option value

Used to confirm your choice.

Used to exit from the menu system and return to normal viewing directly.

English - 11

Plug & Play Feature

Plug & Play

When the television is initially powered on, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock.

Plug & Play

Language

Time

Blue Screen : Off

Melody : 0n

Demonstration

Check antenna input.

œœ √√

Move Skip

Area

Search : -/+

Move

Clock -- : -- am

Sleep Timer : Off On Timer -- : -- am Off Off Timer -- : -- am Off On Timer Volume : 0 On Timer Channel : P 1

Move

œœ

English

œœ √√

Adjust Skip

Auto Store

œœ

ASIA/W.EUROPE

œœ √√

Adjust Skip

œœ √√

Adjust Skip

Setup

Time

1 If the television is in Standby mode, press the POWER () button

√√

on the remote control.

Result

: The message Plug & Play is displayed. It flickers for

a little while, then

Language menu is automatically

displayed.

2 Select the appropriate language by pressing the œ or √ button.

Press the

Result

➢

MENU () button to enter the language.

: The message Check antenna input. is displayed.

If any language is not selected on the Language menu, the Language menu will disappear about 30 seconds later.

3 Make sure that the antenna is connected to the TV.

Press the

Result

√√

4 Select your country by pressing the œ or √ button. To search the

channels, select press the search.

Result

➢

œ or √ button.

: The Auto Store menu is displayed with Area is

selected.

Search by pressing the ▲ or ▼ button, then

œ or √ button. Press the MENU () button to stop the

: The Time menu is displayed with Clock is selected.

Refer to “Storing Channels Automatically” on page 14.

5 Press the œ or √ button to move to the hour or minute. Set the

hour or minute by pressing the

Refer to “Setting and Displaying the Current Time” on page

➢

31.

▲ or ▼ button.

6 When you have finished, press the MENU () button.

Result

: The message Enjoy your watching. is displayed,

then the channel which has been stored will be activated.

Enjoy your watching.

Plug & Play

Language : English

Time

Blue Screen : Off

Melody : 0n

Demonstration

Move Enter Return

English - 12

Setup

7 If you want to reset this feature...

1 Press the MENU () button.

2 Press the ▲ or ▼ button to select Setup , then press the

√√

ENTER () button.

Result

: The

Plug & Play is selected.

3 Press the ENTER () button again.

Result

: This feature starts with the message

is displayed.

When you wish to exit from the Plug & Play, press

➢

the

EXIT () button on the remote control.

Plug & Play

Viewing the Demonstration

To become familiar with the various menus provided by your television, you can view the inbuilt demonstration.

1 Press the MENU () button.

Result

: The main menu is displayed.

2 Press the ▲ or ▼ button to select Setup.

Result

: The options available in the Setup group are

displayed.

3 Press the ENTER () button.

4 Press the ▲ or ▼ button to select Demonstration.

5 Press the ENTER () button.

Result

: Each of the menu options is displayed in turn.

When you wish to exit from the demonstration, press the

➢

EXIT () button on the remote control.

Choosing Your Language

When you start using your television for the first time, you must select the language which will be used for displaying menus and indications.

1 Press the MENU () button.

Result

: The main menu is displayed.

2 Press the ▲ or ▼ button to select Setup.

Result

: The options available in the Setup group are

displayed.

œœ

English

Setup

Plug & Play

Language : English

Time

Blue Screen : Off

Melody : 0n

Demonstration

Move Enter Return

Plug & Play

Language

Time

Blue Screen : Off

Melody : 0n

Demonstration

Move

œœ √√

Adjust Return

√√

3 Press the ENTER () button.

4 Press the ▲ or ▼ button to select Language.

5 Select the appropriate language by pressing the œ or √ button

repeatedly.

English - 13

Storing Channels Automatically

Auto Store

Manual Store

Add/Delete

Sort

Name

††

Move Enter Return

Area

Search : -/+

Move

œœ √√

Adjust Return

Channel

Auto Store

œœ

ASIA/W.EUROPE

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired

√√

√√ √√ √√ √√

programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.

1 Press the MENU () button.

Result

: The main menu is displayed.

2 Press the ▲ or ▼ button to select Channel.

Result

: The options available in the Channel group are

displayed.

√√

3 Press the ENTER () button.

Result

: The Auto Store is selected.

4 Press the ENTER () button again.

Result

: The options available in the Auto Store group are

displayed with

Area is selected.

Area : ASIA/W.EUROPE

Move

P 1 C-- ----- 106 MHz

Move

œœ √√

Return

From

To : P--

Store : ?

œœ √√

Auto Store

œœ

-/+

Search Return

Sort

œœ

P 1

Adjust Return

5 Select your area by pressing the œ or √ button. The countries are

displayed in the following order:

ASIA/W.EUROPE-CIS/E.EUROPE-CHINA-HONGKONG/UK

√√

AUSTRALIA-NZL/INDONESIA-SOUTH AFRICA-AMERICA

6 Press the ▲ or ▼ button to select Search.

7 Press the œ or √ button to start the search.

Result

: The horizontal bar is displayed, then channels are

stored in an order which reflects their positions in the frequency range. Finally, the search will end automatically.

➢ To stop the search before it has finished, press the MENU

()button.

8 When searching and storing are complete, the Sort menu is

displayed.

√√

◆

To sort the stored channels into the desired numerical order, go to Step

6 of the “Sorting the Stored Channels” procedure

on page 15.

◆

To exit from the channel store function without sorting the channels, press the

MENU () button repeatedly until the

menus disappear.

9 When the channels have been stored, you can:

◆

Sort them in the order required (refer to page 15)

◆

Clear a channel (refer to page 18)

◆

Assign a name to the stored channels (refer to page 19)

◆

Fine tune channel reception if necessary (refer to page 20)

◆

Activate the Digital Noise Reduction feature (refer to page 24)

English - 14

Sorting the Stored Channels

This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using auto store. You can delete the channels you do not want to keep.

1 Press the MENU () button.

Result

: The main menu is displayed.

2 Press the ▲ or ▼ button to select Channel.

Result

: The options available in the Channel group are

displayed.

3 Press the ENTER () button.

4 Press the ▲ or ▼ button to select Sort.

5 Press the ENTER () button.

Result

: The options available in the Sort group are displayed

with

From is selected.

6 Select the channel number that you wish to change by pressing

the

œ or √ button repeatedly.

7 Press the ▲ or ▼ button to select To. Select the new channel

number which you wish to identify by pressing the repeatedly.

You can also select the channel number directly by pressing

➢

the numeric buttons (0~9).

œ or √ button

Auto Store

Manual Store

Add/Delete

Sort

Name

††

Move

œœ √√

Enter Return

From

To : P--

Store : ?

œœ √√

Adjust Return

From : P 1

Store : ?

Channel

œœ

P 1

œœ

P 3

√√ √√ √√

√√

Sort

√√

8 Press the ▲ or ▼ button to select Store. Select OK to confirm the

exchange of channel numbers by pressing the

Result

The selected channel is exchanged with the one previously stored to the chosen number.

œ or √ button.

9 For all the channels to move to the required channel numbers,

repeat steps button.

6 to 8 after selecting the From by pressing the ▲ or ▼

Move

œœ √√

Adjust Return

From : P 3

To : P 1

Store

œœ √√

Adjust Return

Sort

œœ

√√

English - 15

Storing Channels Manually

Auto Store

Manual Store

Add/Delete

Sort

Name

††

Move Enter Return

Programme

Color System : AUTO

Sound System : DK

Search : 0MHz

Channel : C--

Store : ?

Move

œœ √√

Adjust Return

Programme : P 1

Color System

Sound System : DK

Search : 0MHz

Channel : C--

Store : ?

œœ √√

Adjust Return

Programme : P 1

Color System : AUTO

Sound System

Search : 0MHz

Channel : C--

Store : ?

œœ √√

Adjust Return

Channel

Manual Store

œœ

P 1

Manual Store

œœ

AUTO

Manual Store

œœ

You can store up to 100 television channels, including those received via cable networks.

√√

√√ √√ √√

When storing channels manually, you can choose:

◆ Whether or not to store each of the channels found

◆ The programme number of each stored channel which

you wish to identify

1 Press the MENU () button.

Result

: The main menu is displayed.

√√

2 Press the ▲ or ▼ button to select Channel.

Result

: The options available in the Channel group are

displayed.

3 Press the ENTER () button.

4 Press the ▲ or ▼ button to select Manual Store.

5 Press the ENTER () button.

Result

: The options available in the Manual Store group are

displayed with

√√

6 To assign a programme number to a channel, press the œ or √

Programme is selected.

button.

7 Press the ▲ or ▼ button to select Color System. Indicate the

broadcasting standard required by pressing the repeatedly.

Result

: The color standards are displayed in the following

order:

AUTO-PAL-SECAM-NT4.43-NT3.58

œ or √ button

8 Press the ▲ or ▼ button to select Sound System. Select the

√√

sound standard required by pressing the

Result

: The sound standards are displayed in the following

order:

BG-DK-I-M

œ or √ button repeatedly.

English - 16

Storing Channels Manually (continued)

9 If you know the number of the channel to be stored, see the

following steps.

◆

Press the ▲ or ▼ button to select Channel.

◆

Press the √ button.

◆

Press the ▲ or ▼ button to select C (Air channel) or S (Cable

channel).

◆

Press the √ button.

◆

Press the ▲ or ▼ button to select indicate the required

number.

You can also select the channel number directly by

➢

pressing the numeric buttons (0~9).

If no sound or abnormal sound, re-select the sound standard

➢

required.

10 If you do not know the channel numbers, select Search by

pressing the search.

Result

▲ or ▼ button. Press the œ or √ button to start the

: The tuner scans the frequency range until the first

channel or the channel that you selected is received on your screen.

11 To store the channel and associated programme number, select

Store by pressing the ▲ or ▼ button. Press the œ or √ button to select

OK.

12 Repeat Steps 9 to 11 for each channel to be stored.

Programme : P 1

Color System : AUTO

Sound System : DK

Search : 0MHz

Channel

Store : ?

Adjust

Programme : P 1

Color System : AUTO

Sound System : DK

Channel : C 1

Store : ?

Move

Programme : P 1

Color System : AUTO

Sound System : DK

Search : 46MHz

Channel : C 1

Store

Move

Manual Store

œœ √√

Move Return

Manual Store

œœ √√

Search Return

Manual Store

œœ √√

Adjust Return

œœ

C 1

46MHz

√√

Channel mode

☛

◆ P (Programme mode):

broadcasting stations in your area have been assigned to position numbers from P00 to max P99. You can select a channel by entering the position number in this mode.

◆ C (Real channel mode):

entering the assigned number to each air broadcasting station in this mode.

◆ S (Cable channel mode):

entering the assigned number for each cable channel in this mode.

When completing tuning, the

You can select a channel by

English - 17

Skipping Unwanted Channels

Auto Store

Manual Store

Add/Delete

Sort

Name

††

Move Enter Return

Channel

You can exclude the channels you chosen from the channels you scanned. When you scan through the stored channels, those you have chosen to skip are not displayed.

√√ √√

√√

√√ √√

All of the channels that you do not specifically choose to skip are displayed during scanning.

1 Press the MENU () button.

Result

: The main menu is displayed.

P 1

P 2 : Deleted

P 3 : Deleted

P 4 : Deleted

Move

P 1

P 2 : Deleted

P 3 : Deleted

P 4 : Deleted

Move

Add/Delete

œœ

Deleted

œœ √√

Adjust Return

Add/Delete

œœ

Added

œœ √√

Adjust Return

2 Press the ▲ or ▼ button to select Channel.

Result

√√

: The options available in the Channel group are

displayed.

3 Press the ENTER () button.

4 Press the ▲ or ▼ button to select Add/Delete.

5 Press the ENTER () button.

Result

The stored channels are displayed.

6 Press the ▲ or ▼ button to select the channel to add or erase.

√√

If necessary, select button.

Added or Deleted by pressing the œ or √

7 Repeat Step 6 for each channel to be added or erased.

English - 18

+ 42 hidden pages