COLOUR
TELEVISION
14F2/14F3/14H4/14H5/14S1/14S4/14V5/3366
15K2/15K5/15K8/15K9
20F3/20H4/20H5/20S1/20S4/20S5/20V5/5038
21A3/21A6/21A7/21A8/21B6/21D8/21F3/21F5/
21H4/21H5/21K2/21K3/21K5/21K9/21S1/21S4/21V5
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ENG
REMOTE CONTROL
ON-SCREEN MENUS
TELETEXT FUNCTION
(depending on the model)
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 1
2
ENG
Safety Instructions
The following illustrations represent the precautions to be taken when using and moving your television.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS
Caution
CAUTION: TO PREVENT ELECTRICAL SHOCK, DO
NOT REMOVE REAR COVER, NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
CAUTION
Do NOT expose the television to
extreme temperature conditions
(below 5°C and above 35°C) or to
extreme humidity conditions (less
than 10% and more than 75%).
Do NOT expose the television to
direct sunlight.
Do NOT expose the television to
any liquids.
If the television is broken, do not
try to repair it yourself. Contact
qualified service personnel.
During a storm conditions
(especially when there is lightning)
unplug the television from the
mains socket and aerial.
If the remote control is not used for
a long period of time, remove the
batteries and store it in a cool, dry
place.
Mode System
CS PAL-B/G, D/K, I, SECAM-B/G,D/K, I,
NTSC4.43 (NTSC3.58; option)
CB PAL-B/G
CD PAL-D/K
WARNING: TO PREVENT DAMAGE WHICH MAY
RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
☛
The main voltage is indicated on the rear of
the TV set and the frequency is 50 or 60Hz.
The lightning flash and arrow head
within the triangle is a warning sign
alerting you of “dangerous voltage”
inside the product.
The exclamation point within the
triangle is a warning sign alerting
you of important instructions
accompanying the product.
!
➢
Please use a soft and dry cloth (not containing volatile matter) when you clean the TV.
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 2
10%
H
5°
75%
35°
H
3
ENG
Contents
◆ PREPARING YOUR TELEVISION
■
Safety Instructions ......................................................................................... 2
■
Caution .......................................................................................................... 2
■
Front Panel Controls...................................................................................... 4
■
Using the Buttons on the Front Panel............................................................ 4
■
Connection Panels ........................................................................................ 5
■
Infrared Remote Control (All Functions Except Teletext) .............................. 6
■
Infrared Remote Control (Teletext Functions) ............................................... 7
■
Inserting the Batteries in the Remote Control................................................ 8
■
Connecting the Aerial (or Cable Television Network).................................... 8
■
Switching Your Television On and Off........................................................... 9
■
Placing Your Television in Standby mode..................................................... 9
■
Plug & Play Feature....................................................................................... 10
■
Choosing Your Language.............................................................................. 11
◆ SETTING UP THE CHANNELS
■
Storing the Channels Automatically............................................................... 12
■
Selecting a Channel Numbered Ten or Over ................................................ 12
■
Storing the Channels Manually...................................................................... 13
■
Skipping Unwanted Channels ....................................................................... 14
■
Fine tuning Channel Reception ..................................................................... 15
■
Sorting the Stored Channels ......................................................................... 16
◆ USING THE TELEVISION
■
Changing the Picture Standard ..................................................................... 17
■
Selecting the Picture Format ......................................................................... 17
■
Adjusting the Picture Settings ....................................................................... 18
■
Changing the Sound Standard ...................................................................... 19
■
Adjusting the Sound Settings ........................................................................ 20
■
Adjusting the Volume..................................................................................... 20
■
Extra Sound Settings
(Auto Volume/Melody/Pseudo Stereo/Turbo Sound) .................................... 21
■
Selecting the Sound Mode ............................................................................ 22
■
Switching the Sound Off Temporarily ............................................................ 22
■
Setting the Sleep Timer ................................................................................. 23
■
Setting and Displaying the Current Time....................................................... 23
■
Switching the Television On and Off Automatically ....................................... 24
■
Activating the Child Lock ............................................................................... 25
■
Extra Function Settings (Blue Screen/Low Noise AMP)................................ 26
◆ USING THE TELETEXT FUNCTION (depending on the model)
■
Teletext Decoder ........................................................................................... 27
■
Displaying Teletext Information ..................................................................... 27
■
Selecting a Specific Teletext Page................................................................ 28
■
Using FLOF to Select a Teletext Page.......................................................... 28
■
Storing Teletext Pages .................................................................................. 29
◆ INFORMATION ON CONNECTIONS AND RECOMMENDATIONS FOR USE
■
Viewing Picture From External Sources ........................................................ 29
■
Connecting to the Audio/Video Input/Outputs ............................................... 30
■
Automatic Degaussing to Remove Color Patches......................................... 31
■
Troubleshooting: Before Contacting Service Personnel................................ 31
☛
➢
Symbols
Press Important Note
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 3
4
ENG
Front Panel Controls (depending on the model)
➣
Buttons and markings are subject to change.
MENU DISPLAY
VOLUME ADJUSTMENT
CHANNEL SELECTION
POWER
STAND-BY INDICATOR
REMOTE CONTROL SENSOR
Using the Buttons on the Front Panel
If your remote control no longer works or you have lost it, you can
use the controls on the front panel of the television to:
◆ Switch on the television when it is in Standby mode and
select channels
( ▼ CH ▲ )
◆ Access the main menu ( MENU )
◆ Adjust the volume ( -VOL + )
Buttons on the front panel have the same function as corresponding
buttons on the remote control.
MENU DISPLAY
VOLUME ADJUSTMENT
CHANNEL SELECTION
STAND-BY
INDICATOR
REMOTE CONTROL SENSOR
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 4
5
ENG
Connection Panels
➢
The actual configuration on your TV may be different, depending on
your model.
Rear of TV
A) SCART AUDIO/VIDEO INPUT/OUTPUT CONNECTOR
B) 75Ω COAXIAL CONNECTOR FOR AERIAL/CABLE NETWORK
C) RCA AUDIO/VIDEO INPUT/OUTPUT CONNECTORS
OUTPUT
INPUT
VIDEO AUDIO
OUTPUT
INPUT
VIDEO AUDIO
RCA AUDIO/VIDEO INPUT
CONNECTORS
Front (or Side) of TV
➢
Connecting earphones ( ) /headphones ( )
◆ You can connect a set of earphones/headphones to your television if you wish to watch a
television programme without disturbing the other people in the room.
◆ Prolonged use of earphones/headphones at a high volume may damage your hearing.
INPUT
MONITOR
-OUT
VIDEO AUDIO
INPUT
MONITOR
-OUT
VIDEO
(
MONO
)
L-AUDIO-R
B
A
C
C
B
C
B
C
B
B
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 5
6
ENG
Infrared Remote Control (All Functions Except Teletext)
➣
Operation of remote control may be affected by bright artificial light near to the TV set.
POWER
SOUND MENU DISPLAY
(OPTION)
ONE/TWO-DIGIT CHANNEL
SELECTION
TURBO SOUND ON/OFF
(OPTION)
TEMPORARY SOUND SWITCH-
OFF
VOLUME DECREASE
PREVIOUS CHANNEL
DIRECT CHANNEL SELECTION
TUNER/CABLE NETWORK
SELECTION
EXTERNAL INPUT SELECTION
ON-SCREEN DISPLAY
AUTOMATIC SWITCH-OFF
PICTURE SIZE
NEXT CHANNEL
VOLUME INCREASE
PICTURE STANDARD (OPTION)
SOUND STANDARD (OPTION)
SOUND MODE SELECTION
(OPTION)
MENU DISPLAY
➣
Buttons and markings are subject to change.
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 6
7
ENG
Infrared Remote Control (Teletext Functions)
TELETEXT HOLD
FASTEXT TOPIC SELECTION
TELETEXT NEXT PAGE
TELETEXT PREVIOUS PAGE
TELETEXT DISPLAY/MIX
LIST/FLOF MODE SELECTION
TELETEXT REVEAL
TELETEXT STORE
PICTURE SIZE
TELETEXT SUB-PAGE
PROGRAMME SELECTION
BY NAME
➣
Buttons and markings are subject to change.
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 7
?
1
1
8
ENG
You must insert or replace the batteries in the remote control when
you :
◆ Purchase the television.
◆ Find that the remote control is no longer operating
correctly.
1 Remove the cover of the remote control by pressing the symbol
( ) and pulling the cover in the direction of the arrow.
2 Insert batteries, taking care to respect the polarities:
◆ + on the battery with + on the remote control
◆-on the battery with -on the remote control
3 Replace the cover by pushing it in the direction of the arrow.
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
Plug the aerial or cable network input cable to the 75Ω coaxial socket
on the rear of the television.
Inserting the Batteries in the Remote Control
Connecting the Aerial (or Cable Television Network)
Cable
Television
Network
Rear of TV
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 8
S
S
E
R
P
PRESS
S
S
E
R
P
75Ω
9
ENG
The mains lead is attached to the rear of the television.
1 Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the TV set and
the frequency is 50 or 60Hz.
2 Press the “” (ON/OFF) button on the front of the television.
Result
: The Standby indicator lights up on the front panel.
3 Press the POWER button on the remote control to switch the
television on.
Result
: The programme that you were watching last is re-
selected automatically.
4 To switch your television off, press the “” (ON/OFF) button
again on the front of the television.
Placing Your Television in Standby mode
Your television can be placed in Standby mode, in order to reduce:
◆ Power consumption
◆ Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
The television is placed automatically in Standby mode when you
turn it on.
1 Press the POWER button on the remote control.
Result:
The screen is turned off and the Standby indicator on
the front of the television lights up.
2 To switch the screen back on, simply press the POWER button
again on the remote control.
➣
Do not leave your television in standby mode for long
periods of time (when you are away on holiday, for example).
In this case, you should switch it off completely.
Switching Your Television On and Off
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 9
10
ENG
Plug & Play Feature
When the television is initially powered ON, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1 If the television is in Standby mode, press the POWER button
on the remote control.
Result: The message “Plug & Play” is displayed. It flickers for a
little while and then the “Language” menu is automatically
displayed.
2 Press the ▲ or ▼ button to select required language. Press the
MENU button to enter the language, and then the message “Ant.
Input Check” is displayed.
➣
If any language is not selected on the “Language” menu, the
“Language” menu will be displayed about 30 seconds later.
3 Make sure that the antenna is connected to the TV. And then press
the + or – button to store the channels (refer to “Storing the
Channels Automatically” on page 12).
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range.
4 When searching and storing is complete, the “Time” menu is
displayed.
5 Press the + or – button to move to the hour or minute. Set the hour
or minute by pressing the ▲ or ▼ button (refer to “Setting and
Displaying the Current Time” on page 23).
6 When you have finished, press the MENU button.
Result: The message “ENJOY YOUR WATCHING” is displayed,
and then the channel which has been stored will be
activated.
7 If you want to reset this feature...
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the “Function”, and then
press the + or – button.
3 Select the “Plug & Play” by pressing the ▲ or ▼ button, and
then press the
+ or – button.
Result:
The message “Plug & Play” is displayed.
ENJOY YOUR WATCHING
Time
Clock - - : - - AM
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 10
Plug & Play
Ant. Input Check
Auto Store Exit
P 1
471 MHz 48 %
Exit
Time
Clock 11 : 35
Move Exit
Enjoy Your Watching...
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Low Noise AMP : Off
Select Enter Exit
Function
11
ENG
Choosing Your Language
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the “Function”.
3 Press the + or – button to select the “Language”.
4 Select a particular language by pressing the ▲ or ▼ button
repeatedly.
5 When you have finished, press the TV button or, press the
MENU button repeatedly to return to normal viewing.
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 11
Picture
Mode Custom
Adjust
Size : Normal
Select Enter Exit
Function
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Low Noise AMP : Off
Select Enter Exit
Function
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Low Noise AMP : Off
Select Adjust Exit
12
ENG
Storing the Channels Automatically
Selecting a Channel Numbered Ten or Over
When using the numeric buttons to select a channel stored at
programme position ten or higher, follow the instructions below.
1 Press the
-/--
button.
Result:
The “--” symbol is displayed.
2 Enter the two-digit channel number.
Example
: To select channel 42, press 4, followed by 2.
You can scan the frequency ranges available on your television and
in your country and store all the channels found automatically.
The channels are stored in the order in which they appear in the
frequency bands. It is possible that the automatically allocated
numbers may not correspond to those by which you wish to
identify the channels. If this is the case, refer to “Sorting the Stored
Channels” on page 16.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the “Channel”.
3 Press the + or – button to select the “Auto Store”.
4 Press the + or – button again.
Result:
The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end automatically.
5 When searching and storing is complete, the “Sort” menu is
displayed.
To... Then...
Sort the stored channels Go to Step 4 of the “Sorting
into the desired numerical order the Stored Channels”
procedure on page 16.
Exit the channel store function Press the MENU button
without sorting the channels repeatedly until the menus
disappear.
➣
If sound does not work regularly after storing channels, select
the sound system which best corresponds in “Manual Store”
menu (refer to the opposite page).
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 12
Mode Custom
Adjust
Size : Normal
Picture
Select Enter Exit
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Channel
Select Enter Exit
P 1
471 MHz 48 %
Exit
Channel
Sort
From : P 1
To : P-Store : ?
Select Adjust Exit
13
ENG
When storing channels manually, you can choose:
◆ Whether or not to store each of the channels found.
◆ The number by which you wish to identify each stored
channel.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the “Channel” and press the + or
– button.
3 Press the ▲ or ▼ button to select the “Manual Store” and press the
+ or – button.
Result:
The “Manual Store” menu is displayed with the “Color
System” selected.
4 Press the + or – button repeatedly until the color is of the best
quality.
Result:
The “ Color System” is changed (depending on the
model).
AUTO ↔ PAL ↔ SECAM ↔ NTSC4.43 ↔ NTSC3.58
➣
NTSC4.43 is a “trick” playback mode used
by special VCR’s to play PAL-recorded
videos in NTSC mode.
5 Press the ▲ or ▼ button to select the “Sound System” and press
the + or – button repeatedly until the sound is of the best quality.
Result:
The “Sound System” is changed (depending on the
model).
B/G ↔ D/K ↔ I ↔ M
➣
If sound does not work regularly after storing
channels, select the sound system which best
corresponds.
6 To start the search, select the “Search” and then press the + or –
button.
Result:
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
your screen.
7 To assign a programme number to the channel, select the
“Prog.No.”. Press the + or – button until you find the correct
number.
8 To store the channel and associated programme number, select
the “Store” and press the + or – button.
Result:
“OK” is displayed.
9 Repeat Steps 6 to 8 for each channel to be stored.
10 When you have finished manual storage, press the TV button
or, press the MENU button repeatedly to return to normal viewing
Storing the Channels Manually
➞
➞
➞
➞
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : OK
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 13
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Select Enter Exit
Manual Store
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Select Adjust Exit
Manual Store
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Select Adjust Exit
Manual Store
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Select Adjust Exit
Manual Store
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Select Adjust Exit
Manual Store
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : OK
Select Adjust Exit
Channel
Channel
Channel
Channel
Channel
Channel
You can exclude the channels of your choice from the channel scan
operation. When you scan through the stored channels, those you
have chosen to skip are not displayed.
All channels that you do not specifically choose to skip are
displayed during scanning.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the “Channel” and press the + or
– button.
3 Press the ▲ or ▼ button to select the “Add/Erase” and press the +
or – button.
Result: The “Add/Erase” menu is displayed.
4 Press the ▲ or ▼ button to select the required channel.
5 To add or erase the desired channel by pressing the + or – button.
6 When you have finished adding and erasing channels, press the
TV button or, press the MENU button repeatedly to return to
normal viewing
14
ENG
Skipping Unwanted Channels
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 14
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Channel
Select Enter Exit
Add/Erase
P 0 : Added
P 1 : Added
P 2 : Added
P 3 : Added
Channel
Select Adjust Exit
Add/Erase
P 0 : Erased
P 1 : Added
P 2 : Added
P 3 : Added
Channel
Select Adjust Exit
15
ENG
If the reception is clear, you do not have to fine-tune the channel,
as this is done automatically during the search and store operation.
If however the signal is weak or distorted, you may have to finetune the channel manually.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the “Channel” and press the + or
– button.
3 Press the ▲ or ▼ button to select the “Fine Tune” and press the +
or – button.
Result: The “Fine Tune” menu is displayed with the “Tune”
selected.
4 To... Press the...
obtain a sharp and ◆ + or – button.
clear picture and Result: The horizontal bar’s
good sound quality cursor moves to the left
or right.
memorise adjusted ◆▲ or ▼ button to select the “Store”.
picture or sound ◆ + or – button.
Result:
“OK” is displayed.
erase adjusted ◆▲ or ▼ button to select the “Erase”.
picture or sound ◆ + or – button.
Result:
“OK” is displayed.
5 When you have finished, press the TV button or, press the
MENU button repeatedly to return to normal viewing.
Fine tuning Channel Reception
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 15
Channel
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Select Enter Exit
Channel
Fine Tune
Tune : -/+
Store : ?
Erase : ?
Select Adjust Exit
Fine Tune +1
Channel
Fine Tune
Tune : -/+
Store : OK
Erase : ?
Select Adjust Exit
Channel
Fine Tune
Tune : -/+
Store : ?
Erase : OK
Select Adjust Exit
You can exchange the numbers of two channels, in order to:
◆ Modify the numeric order in which the channels have
been automatically stored.
◆ Give easily remembered numbers to the channels that
you watch most often.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the “Channel” and press the + or
– button.
3 Press the ▲ or ▼ button to select the “Sort” and press the + or –
button.
Result:
The “Sort” menu is displayed with the “From” selected.
4 Press the + or – button until the channel number that you wish to
change is displayed.
Result:
The selected channel’s picture is displayed.
5 Press the ▲ or ▼ button to select the “To”.
6 Press the + or – button until the new number by which you wish to
identify the channel is displayed.
Result: The selected channel is exchanged with the one
previously stored to the chosen number.
Example: If you select “ P 1” for the “From” and “P 3” for the “To”:
◆ Channel 1 becomes channel 3.
◆ Channel 3 becomes channel 1.
7 To... Press the...
Confirm the exchange ◆▲ or ▼ button to select the “Store”.
of channel numbers ◆ + or – button.
Result: “OK” is displayed.
➣
You can exchange other
channel numbers by selecting
“From” and returning to step 4.
8 When you have finished sorting channels, press the TV button
or, press the MENU button repeatedly to return to normal viewing
16
ENG
Sorting the Stored Channels
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 16
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Channel
Select Enter Exit
Channel
Sort
From : P 1
To : P-Store : ?
Select Adjust Exit
Channel
Sort
From : P 1
To : P 3
Store : ?
Select Adjust Exit
Channel
Sort
From : P 3
To : P 1
Store : OK
Select Adjust Exit
17
ENG
You can select the type of picture which best corresponds to your
viewing requirements. The following picture effects are available in
the order given:
◆ Custom, Standard, Sports, Natural, Mild.
1 Press the MENU button.
Result:
The “Picture” menu is displayed.
2 Press the + or – button.
Result:
The “Mode” menu is selected.
3 Select to satisfy your preference by pressing the + or – button.
4 When you have been finished, press the TV button or, press the
MENU button repeatedly to return to normal viewing.
➣
You can select the required picture effect by simply
pressing the “P.STD” (Picture standard) button on the
remote control.
Changing the Picture Standard
Selecting the Picture Format (depending on the model)
You can select the picture format which best corresponds to your
viewing requirements. The following picture formats are available
in the order given:
◆ Normal
◆ Zoom
◆ 16:9 (option)
1 Press the MENU button.
Result:
The “Picture” menu is displayed.
2 Press the + or – button.
3 Press the ▲ or ▼ button to select the “Size”.
4 Select to satisfy your preference by pressing the + or – button.
5 When you have been finished, press the TV button or, press the
MENU button repeatedly to return to normal viewing.
➣
You can select the required picture format by simply
pressing the “P.SIZE
”
(Picture size) button on the
remote control.
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 17
Picture
Mode Custom
Adjust
Size : Normal
Select Adjust Exit
Picture
Mode Custom
Adjust
Size : Normal
Select Adjust Exit
18
ENG
Adjusting the Picture Settings
Your television has several settings which allow you to control picture
quality:
◆ Color Tone, Contrast, Brightness, Sharpness,
Color, Tint (NTSC only)
1 Press the MENU button.
Result:
The “Picture” menu is displayed.
2 Press the + or – button.
3 Press the ▲ or ▼ button to select the “Adjust”, and then press the +
or – button.
Result:
When select the “Mode” to “Custom”, the “Adjust” menu is
displayed.
4 To adjust the... Press the...
◆ Color Tone ◆ + or – button.
Result:
You select the required option
(Normal, Warm1, Warm2,
Cool1, Cool2).
◆ Contrast ◆ + or – button.
◆ Brightness Result: The horizontal bar is displayed.
◆ Sharpness
◆ Color
◆ Tint (NTSC only)
5 When you are satisfied with the settings, press the TV button or,
press the MENU button repeatedly to return to normal viewing.
➣
The television has an “automatic degaussing” system that is
activated if magnetic interference is present. To degauss the
television screen, switch power off by pressing the “”
(ON/OFF) button on the front panel (refer to “Automatic
Degaussing to Remove Color Patches” on page 31).
➣
If you make any changes to the “Adjust” settings, the picture
standard is automatically switched to “Custom”.
Color Tone : Normal
Contrast 100
Brightness 50
Sharpness 50
Color 50
Color Tone : Normal
Contrast 100
Brightness 50
Sharpness 50
Color 50
Contrast 100
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 18
Mode Custom
Adjust
Size : Normal
Picture
Select Enter Exit
Adjust
Color Tone : Normal
Contrast 90
Brightness 50
Sharpness 50
Color 50
Select Adjust Exit
Adjust
Color Tone : Normal
Contrast 90
Brightness 50
Sharpness 50
Color 50
Select Adjust Exit
Contrast 91
Picture
Picture
You can select the type of special sound effect to be used when
watching a given broadcast. The following sound effects are
available in the order given:
◆ Custom, Standard, Music, Movie, Speech.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the “Sound” and press the + or –
button.
Result:
The “Mode” menu is selected.
3 Select to satisfy your preference by pressing the + or – button.
4 When you have been finished, press the TV button or, press the
MENU button repeatedly to return to normal viewing.
➣
You can select the required sound effect by simply pressing
the “S.STD” (Sound standard) button on the remote
control.
19
ENG
Changing the Sound Standard (depending on the model)
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 19
Sound
Mode Custom
Adjust
Auto Volume : Off
Melody : Off
Pseudo Stereo : Off
Turbo Sound : Off
Select Adjust Exit
20
ENG
Adjusting the Sound Settings (depending on the model)
The sound settings can be adjusted to suit your personal preferences.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the “Sound” and press the + or –
button.
3 Press the ▲ or ▼ button to select the “Adjust” and press the + or –
button.
Result:
When select the “Mode” to “Custom”, the “Adjust” menu
is displayed.
4 Select the required option by pressing the ▲ or ▼ button and
adjust to satisfy your preference by pressing the + or – button.
5 Press the + or – button.
R
esult: The horizontal bar is displayed.
6 When you are satisfied with the settings, press the TV button or,
press the MENU button repeatedly to return to normal viewing.
➢
You can display the sound adjust menu directly by pressing
the “S.MENU” (Sound menu) button on the remote control.
Adjusting the Volume
You can adjust the volume by pressing the + or -button on the
remote control.
◆ Press the + button to increase the volume (cursor moves to the right)
◆ Press the -button to decrease the volume (cursor moves to the left)
➣
The volume setting is retained:
◆ When you switch the television to standby mode
◆ When you switch the television off using the “”
(ON/OFF) button on the front panel
◆ If there is a power failure.
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 20
Mode Custom
Adjust
Auto Volume : Off
Melody : Off
Pseudo Stereo : Off
Turbo Sound : Off
Select Enter Exit
Adjust
Bass 50
Treble 50
Balance L 50 R 50
Select Adjust Exit
Sound
Sound
Balance L 49 R 51
21
ENG
Extra Sound Settings (depending on the model)
The following sound settings can be adjusted to suit your personal
preferences.
◆ Auto Volume
Each broadcasting station has its own signal conditions,
and so it is not easy for you to adjust the volume every
time the channel is changed. “Auto Volume” lets you
automatically adjust the volume of the desired channel by
lowering the sound output when the modulation signal is
high or by raising the sound output when the modulation
signal is low.
◆ Melody
You can hear clear melody sound when the TV is
powered ON or OFF.
◆ Pseudo Stereo
“Pseudo Stereo” converts a monaural sound signal into
two identical left and right channels.
Once the “Pseudo Stereo” is set to “On” or “Off”, the
setting applies to the sound effects such as Standard,
Music, Movie and Speech.
◆ Turbo Sound
You can enjoy more magnificent and dynamic sound
when watching music, movie or other channel. “Turbo
Sound” suitably emphasizes both higher and lower bands
of sound (and includes other effects).
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the “Sound” and press the + or –
button.
3 To... Press the...
Change an option ▲ or ▼ button.
Select the required option (On/Off) + or – button.
4 When you are satisfied with the settings, press the TV button
or, press the
MENU button repeatedly to return to normal viewing.
➢
You can select the turbo sound by simply pressing the
“TURBO” button on the remote control.
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 21
Sound
Mode Custom
Adjust
Auto Volume : Off
Melody : Off
Pseudo Stereo : Off
Turbo Sound : Off
Select Enter Exit
Sound
Mode Custom
Adjust
Auto Volume : On
Melody : Off
Pseudo Stereo : Off
Turbo Sound : Off
Select Adjust Exit
Sound
Mode Custom
Adjust
Auto Volume : Off
Melody : On
Pseudo Stereo : Off
Turbo Sound : Off
Select Adjust Exit
Sound
Mode Custom
Adjust
Auto Volume : Off
Melody : Off
Pseudo Stereo : On
Turbo Sound : Off
Select Adjust Exit
Sound
Mode Custom
Adjust
Auto Volume : Off
Melody : Off
Pseudo Stereo : Off
Turbo Sound : On
Select Adjust Exit
22
ENG
The “S.MODE I-II” button displays/controls the processing and
output of the audio signal. When power is switched ON, the mode
is automatically preset to either “Dual-
I” or “STEREO”, depending
on the current transmission.
Selecting the Sound Mode (depending on the model)
➣
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the “MONO” position using
the
S.MODE I-II button.
◆ If the stereo signal is weak (or if intermittent Stereo-Mono)
and automatic switching occurs, then switch to the
“MONO” mode.
◆ When receiving mono sound in the AV mode, connect to
the “L” input jack on the panels. If the mono sound
comes out only from the left speaker, then press the
S.MODE I-II button.
Switching the Sound Off Temporarily
You can switch the sound off temporarily, for example you may
wish to answer the telephone.
1 Press the MUTE button.
Result:
The sound is switched off and “” is displayed.
2 When you wish to turn the sound back on at the same volume as
before, press the MUTE button again (or either of the volume
buttons).
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM Stereo
NICAM Dual-I/II
Regular broadcast
(Standard audio)
Bilingual or Dual-I/II
Stereo
On-screen indication
MONO
(Normal use)
MONO
↔
MONO
NICAM (Normal)
STEREO
↔
MONO
NICAM (Normal)
MONO (Normal use)
Dual-I
↔
Dual-II
STEREO
↔
MONO
(Forced Mono)
Dual-I → Dual-II → MONO
NICAM NICAM (Normal)
NICAM
Stereo
A2
Stereo
→
→
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 22
23
ENG
You can select a time period of between 30 and 180 minutes after
which the television automatically switches to Standby mode by
pressing the "SLEEP " button.
1 Press the SLEEP button on the remote control.
Result:
If the sleep timer is... The screen displays...
Already set Time remaining before the television
will be placed in standby mode.
Not yet set Word “Off”.
2 Press the SLEEP button repeatedly and cycle through the
preset time intervals (30, 60, 90, 120, 150, 180).
Result:
The television automatically switches to standby mode
when the timer reaches 0.
3 To cancel the sleep timer function, press the SLEEP button
repeatedly and select “Off”.
Setting the Sleep Timer
You can set the television’s clock so that the current time is displayed
when you press the “DISPLAY ” button.
You must also set the time if you wish to use the automatic On/Off
timers.
➣
The clock setting will be re-activated when pressing the
“” (ON/OFF) button on the front panel.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the “Function” and press the
-
or
+ button.
3 Press the ▲ or ▼ button to select the “Time”, and press the
-
or +
button.
Result:
The “Time” menu is displayed with the “Clock” selected.
4 To... Press the...
Move to the hour or minute
-
or + button.
Set the hour or minute ▲ or ▼ button.
5 When you have finished, press the TV button or, press the
MENU button repeatedly to return to normal viewing.
6 To display the... Press the DISPLAY button...
Channel information Once.
Current time Twice.
7 To remove the display, press the DISPLAY button again.
Setting and Displaying the Current Time
(depending on the model)
Clock 11 : 00 AM
Timer Off
Adjust Move Exit
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 23
Function
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Low Noise AMP : Off
Select Enter Exit
Function
Time
Clock 11 : 35
Timer Off
Select Adjust Exit
24
ENG
You can set the On/Off timers so that the television will:
◆ Switch on automatically and tune to the channel of your
choice at the time you select
◆ Switch off automatically at the time you select
➣
The first step is to set the television’s clock (refer to
“Setting and Displaying the Current Time” on the
previous page). If you have not yet set the clock, the
message “Set the clock first” is displayed.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the “Function” and press the
-
or
+ button.
3 Press the ▲ or ▼ button to select the “Time”, and press the
-
or +
button.
Result:
The “Time” menu is displayed.
4 Press the ▲ or ▼ button to select the “Timer”.
5 Press the
-
or + button to set the mode to “On”.
Result: The “On Time” and “Off Time” options are displayed.
6 Press the ▲ or ▼ button to select the “On Time”.
7 Set the time at which you wish the television to be switched On.
To... Press the...
Move to the hour or minute
-
or + button.
Adjust the hour or minute ▲ or ▼ button.
8 In the same way, set the time at which you wish the television to be
switched Off.
9 When you have finished setting the On/Off time, press the TV
button or, press the MENU button repeatedly to return to normal
viewing.
➣
Fuzzy Power Off
If no function buttons (including remote control buttons
or front panel buttons) are operated for three hours after
the TV is turned on by “On time”, the TV will be
automatically turned off.
Switching the Television On and Off Automatically (depending on the model)
Clock 11 : 35 AM
Timer On
On Time -- : -- AM
Off Time -- : -- AM
Clock 11 : 35 AM
Timer On
On Time 07 : 00 AM
Off Time -- : -- AM
Clock 11 : 35 AM
Timer On
On Time 07 : 00 AM
Off Time 11 : 00 PM
Clock 11 : 35 AM
Timer Off
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 24
Time
Clock 11 : 35
Timer Off
Function
Select Adjust Exit
Time
Clock 11 : 35
Timer On
On Time -- : --
Off Time -- : --
Select Adjust Exit
Time
Clock 11 : 35
Timer On
On Time 07 : 00
Off Time -- : --
Select Adjust Exit
Time
Clock 11 : 35
Timer On
On Time 07 : 00
Off Time 23 : 00
Function
Function
Function
Select Adjust Exit
25
ENG
You can restrict viewing by locking the channels of your choice.
Example
: You can prevent your children from watching
unsuitable programmes.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the “Function” and press the
-
or
+ button.
3 Press the ▲ or ▼ button to select the “Child Lock” and press the
-
or + button.
Result
: The “Child Lock” menu is displayed.
4 Set to “On” by pressing the
-
or + button.
➣
If you want to unlock a channel, set to “Off”.
5 Press the ▲ or ▼ button to select the “Prog.No.”. Select the
number of the channel to be locked by pressing the -or + button.
6 Press the ▲ or ▼ button to select the “Lock” and press the
-
or +
button.
Result
: “Locked” is displayed.
7 When you have finished, press the TV button or, press the
MENU button repeatedly to return to normal viewing.
➣
If any channel is locked, you cannot enter the “Channel”
menu (the message “Not available” is displayed).
Activating the Child Lock (depending on the model)
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 25
Function
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Low Noise AMP : Off
Select Enter Exit
Function
Child Lock
Child Lock : Off
Select Adjust Exit
Function
Child Lock
Child Lock : On
Prog.No. : 1
Lock : ?
Select Adjust Exit
Function
Child Lock
Child Lock : On
Prog.No. : 1
Lock : Locked
Select Adjust Exit
P 1
Child Lock : Locked
26
ENG
The following settings can be adjusted to suit your personal
preferences.
◆ Blue Screen
If no signal is being received or the signal is very weak,
a blue screen automatically replaces the noisy picture
background. If you wish to continue viewing the poor
picture, you must set the “Blue Screen” mode to “Off”.
◆ Low Noise AMP
This function is very useful in the situation that the TV is
used in weak signal. LNA amplifies the TV signal in the
weak signal area, but not noise. This feature is working
only weak signal condition, and that is memorized on
current channel, additional.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the “Function” and press the + or
– button.
3 To... Press the...
Change an option ▲ or ▼ button.
Select the required option (On/Off) + or – button.
4 When you are satisfied with the settings, press the TV button
or, press the MENU button repeatedly to return to normal viewing.
Extra Function Settings (depending on the model)
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 26
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Low Noise AMP : Off
Select Enter Exit
Function
Function
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Low Noise AMP : Off
Select Adjust Exit
Function
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Low Noise AMP : On
Select Adjust Exit
27
ENG
Most television channels carry “teletext,” pages of written
information that provide information such as:
◆ Television programme times
◆ News bulletins
◆ Weather forecasts
◆ Sports results
◆ Subtitles for the hard of hearing
The teletext pages are organized according to six categories:
Part Contents
A Selected page number.
B Broadcasting station identity.
C Current page number or search status
D Date and time.
E Text.
F Status information.
You can display teletext information at any time, but signal
reception must be good. Otherwise:
◆
Information may be missing
◆
Some pages may not be displayed
To activate the teletext mode and display the contents page:
1 Using the ▲ ( ) or ▼ ( ) button, select the channel providing
the teletext service.
2 Press the TTX/MIX ( ) button to activate the teletext mode.
Result: The contents page (page 100) is displayed. It can be
redisplayed at any time by pressing the INDEX ( )
button.
3 To display the actual broadcast simultaneously with the teletext
page, press the TTX/MIX ( ) button.
4 To return to normal viewing press the TV button.
Teletext Decoder
Displaying Teletext Information
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 27
1
1
1
1
28
ENG
Press the number buttons on the remote control to enter the page
number directly:
1 Enter the three-digit page number listed in the contents by pressing
the corresponding numeric buttons.
Result
: The current page counter is incremented and the page is
then displayed.
2 If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display
on a given page, press the HOLD ( ). Press the HOLD again to
resume.
3 Using the various display options:
To display... Press the...
◆ Both teletext information and TTX/MIX ()
the normal broadcast
◆ Hidden text REVEAL ( )
(answers to quiz games, for example)
◆ The normal screen REVEAL ( ) again
◆ A secondary page, SUB-PAGE ( )
by entering its 4-digit number
◆ The next page PAGE UP ( )
◆ The previous page PAGE DOWN ( )
◆ Double-size letters in the: SIZE ( )
• Upper half of the screen ◆ Once
• Lower half of the screen ◆ Twice
◆ Normal screen ◆ Three times
Selecting a Specific Teletext Page
The various topics included in the teletext pages are color-coded,
and can be selected by pressing the colored buttons on the remote
control.
1 Display the teletext contents page by pressing the TTX/MIX ()
button.
2 Press the colored button corresponding to the topic that you wish to
select (The available topics are listed on the status information
line).
Result:
The page is displayed with additional color-coded
information that can be selected in the same way.
3 To display the: Press the:
Previous page Red button.
Next page Green button.
4 When you have finished, press the TV button to return to the
normal broadcast.
Using FLOF to Select a Teletext Page
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 28
?
1
1
?
?
1
1
1
29
ENG
Up to four teletext pages can be stored.
1 Select the LIST mode.
Result:
Four 3-digit numbers are displayed in different colors at
the bottom of the screen.
2 Press the colored button corresponding to the page that will be
replaced.
3 Enter the new page number using the numeric buttons.
4 Repeat steps 2 and 3 for each page to be stored, using a different
colored button each time.
5 Press the STORE ( ) button until the corresponding blocks are
displayed in white.
➣
The LIST ( ) button is used to switch between:
◆ LIST mode
◆ FLOF mode
Storing Teletext Pages
Once you have connected up your various audio and video systems,
you can view the different sources by selecting the appropriate input.
1 Check that all the necessary connections have been made.
2 Switch the television on and if necessary, press the VIDEO
button one or more times until the required input is displayed.
➢
Depending on the source selected, the pictures may appear
automatically.
➢
To watch television programmes again, press the TV
button and select the number of the channel required.
Viewing Pictures From External Sources
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 29
?
?
1
30
ENG
Connecting to the Audio/Video Input/Outputs
➢
The actual configuration on your TV may be different, depending on
your model.
➢
The Audio/Video connector on the rear of the television is
used for equipment with an RGB output.
Rear of TV
(depending on the model)
Video disc player
Decoder/
Video game device
VCR
Camcorder
Satellite receiver
AV cable
(depending on the model)
Front (or Side) of TV
(depending on the model)
AV cable
(depending on the model)
Video disc player
Decoder/
Video game device
Camcorder
➢
◆ The Audio/Video connector on the front (or side) of the television is
used for equipment, such as camcorders, video disc players and
certain video games.
◆ When both the front (or side) and rear connectors are connected to external equipment,
the front (or side) AV has the priority.
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 30
OUTPUT
VIDEO AUDIO
INPUT
MONITOR
MONITOR
-OUT
INPUT
-OUT
INPUT
VIDEO AUDIO
(
MONO
L-AUDIO-R
VIDEO
)
31
ENG
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
◆ Check that the mains lead has been connected to a wall socket.
◆ Check that you have pressed the “” (ON/OFF) button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
◆ Check the volume.
◆ Check whether the MUTE button has been pressed on the
remote control.
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
◆ Try to identify the electrical appliance that is affecting the television
and move it further away.
◆ Plug your television into a different mains socket.
◆ Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
Troubleshooting: Before Contacting Service Personnel
No sound or picture
Normal picture but no sound
No picture or black and white picture
Sound and picture interference
Blurred or snowy picture,
distorted sound
Remote control malfunctions
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the
television manually.
If you move the television to a different position and color patches appear on the screen, you must:
◆ Switch the television off by pressing the “” (ON/OFF) button on the front panel
◆ Unplug the television from the wall socket
◆ Leave the television power-off (stand-by) for about 30 minutes so that the automatic degauss
function can be activated, and then press the POWER button on the remote control.
☛
If your television will be left unattended, press the “” (ON/OFF) button to turn your
television off.
Automatic Degaussing to Remove Color Patches
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 31
-
AFTER SALES SERVICE
-
Do not hesitate to contact your retailer or service
agent if a change in the performance of your product
indicates that a faulty condition may be present.
AA68-01818B-01 (ENG)
ELECTRONICS
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 32
Loading...