Samson Q6 Quick Start Guide

PRO

53mm

165mm

TYPE:

MICROPHONES

DYNAMIC

MICS

PRODU CT DESCR IPTI ON

SUPER-CARDIOID MIC

SERIE S

Q SERIES DYNAMIC MICS

PRODUCT SPECIFICATION SHEET

GENERAL DESCRIPTION

The Q6 dynamic microphone brings a high level of accuracy and audio performance to vocal miking applications thanks to its low mass, neodymium element.

The Q6 is a hand held, dynamic microphone that excels in both live performance and recording applications. Equipped with a linear frequency response for superior reproduction, it is also designed to withstand high sound pressure levels. Extremely sensitive, it employs a tight super-cardioid pattern to reduce feedback. A special shock-mounted element minimizes handling noise and provides additional protection.

FEATURES

> Ultra sensitive element picks up all of the nuances of

any performance.

> Super-cardioid polar pattern minimizes feedback

problems and effectively rejects signals not originating directly in front of the mic capsule.

> Extended range frequency response for optimum

reproduction and exceptionally clear, crisp sound.

> Handy ON/OFF switch for on-stage control.

> Special shock-mounting allows movement of the mic

element to greatly reduce handling noise.

CATEGO RY

FEATURES (continued)

> Rugged zinc alloy die-cast case ensures reliable

performance in even the most demanding environments.

> The Q6 can be mounted on any standard microphone stand

(using the included mic clip).

> Withstands high SPLs, lending itself to a wide range of

miking situations.

> Low impedance output lets the Q6 send a strong full

bandwidth signal over long cable runs.

> Gold plated XLR Connector.

ARCHITECT’S & ENGINEER’S SPECIFICATIONS

The Samson Q6 shall be a dynamic microphone. It shall have a super-cardioid pickup pattern. The Q6 shall use a Neodymium mic element. It shall have a On/Off switch mounted on the side of the microphone. It shall be a low impedance design and have an included mic stand clip.

Q6 SPECIFICATIONS

Type ............................................... Dynamic

Frequency Response ......................... 50 Hz - 15 kHz

Polar Pattern ................................... Super-Cardioid

Output Impedance ............................500Ω

Sensitivity ....................................... -50 dBV/Pa (3.2mV/Pa)

Connector ....................................... 3-pin, gold plated,

Dimensions

Diameter ............................ 2.09 in. / 53 mm

Total length ........................6.50 in. / 165 mm

Weight ............................................ 9.52 oz. / 267 g

balanced XLR male

PRODUCT SPECIFICATION SHEET

SERI ES DESC RIPTIO N CATE GORY

Q SERIES SUPER-CARDIOID DYNAMIC MIC DYNAMIC MIC

Q6 FREQUENCY RESPONSE

Q6 POLAR PATTERN