Samson MDR 1064 User Manual

PRO

TYPE:

MIXERS

PRODU CT DESCR IPTI ON

MIXER

MDR 1064

SERIE S

MDR MIXERS

PRODUCT SPECIFICATION SHEET

FRONT PA NEL

BACK PAN EL

CATEGO RY

GENERAL DESCRIPTION

The MDR1064 is a ten-channel mixer, with six low noise microphone pre-amps. The six Mic/line inputs and two stereo inputs each feature a 3-band equalizer plus two Aux sends. The MDR1064’s master section includes two stereo Aux returns and a 2-track Input and Output for the playing back of stereo devices and for recording your mix. Clean, clear sound reproduction with sweet equalization and signal flexible routing in a rugged enclosure, ensure reliable high quality sound from performance to performance. Optimized for recording, live sound reinforcement and commercial installations, the MDR1064 is an ideal mixer solution offering big sound in a compact package.

FEATURES

> Ten Channels – Six Mic/Line plus two Stereo inputs.

> Flexible design topology ideal for live sound, recording and

post production.

> 2 Track Input and Output allows you to connect a CD, DAT,

Cassette, Mini Disk or Computer Sound Card.

> Three-band channel equalizer, +/-15dB at 80Hz, 2.5

KHz and 12KHz provides precise and musical results in sound shaping.

> Two Auxiliary Sends for built-in or external effects, on-

stage monitor mix, or headphone mixing.

> Twelve segment LED Meter with VU ballistics displays

the main output.

> High quality, low noise, discrete microphone pre-amplifiers

with 48-Volt phantom power, provide Maximum Dynamic Range and transparent audio.

> Advanced circuit design using discrete components and

high quality, low noise op-amps carefully selected at each stage of the signal path.

> Quality build and rugged construction ensure reliable

performance from venue to venue and session to session.

> Three-year extended warranty.

PRODUCT SPECIFICATION SHEET

71mm

304mm

344mm

SERI ES DESC RIPTIO N CATE GORY

MDR MIXER MIXERS

MDR 1064 SPECIFICATIONS

Mono input channels

Microphone input ................ electronically balanced,

discrete input

configuration

Frequency response ............ 10Hz to 50kHz, +/- 0.4 dB

Distortion ........................... (THD & N) 0.007% at

4dBu, 1kHz

Gain range ......................... 5dB to +60dB (MIC)

SNR (Signal to Noise Ratio) ... 105dB

Line input .......................... electronically balanced

Frequency response ............ 10Hz to 45kHz

Distortion (THD & N) ........... 0.01% at 4dBu, 1kHz

Sensitivity range ................. -26dBu to +26dBu

Stereo input Channels

Line input .......................... Balanced

Frequency response ............ 10Hz to 50kHz, +/- 0.4dB

Distortion (THD & N) ........... 0.008% at +4dBu, 1kHz

Impedances

Microphone input ................ 4.5k Ohm

Channel Insert return .......... 2.5k Ohm

All other inputs ................... 14.8k Ohm or greater

Tape out ............................. 1k Ohm

All other output .................. 120 Ohm

Equalization

Hi shelving ......................... +/- 15dB @12kHz

Mid peak ............................ +/- 15dB @2.5kHz

Low shelving ....................... +/- 15dB @80Hz

Low Cut filter ...................... 75Hz, 18dB/oct.

Main Mix Section

Noise (Bus noise) ................ Levels full down: -97dBr

Max output ......................... +22dBu balanced XLR,

AUX Return gain range ........ ∞ to +15dB

AUX Sends max out ............ +22dBu

Power Consumption ............ 15W

Power supply (AC/AC Adaptor)

Main voltage ....................... USA/Canada 108 - 132V, 60Hz

Physical

Net weight ......................... 6.8 lb. (3.1Kg)

Dimension (W x D x H) ........ 13.5” x 12” x 2.8”

MDR 1064

(ref.:+4dBu); Level set to 0 dB: -85dBr (ref.:+4dBu)

22dBu unbalanced, 1/4” jacks

Europe 210 - 230V, 50Hz U.K./Australia 240V, 50Hz

(344mm x 304mm x 71mm)

ARCHITECT’S & ENGINEER’S SPECIFICATIONS

The Samson MDR1064 shall be a 10 input, stereo output mixer. It shall have 6 mic channels with trim controls, switchable high pass filter, high frequency, mid frequency, and low frequency equalizer controls, 2 aux sends, pan control, level control and LED peak indicators. It shall have 2 line input stereo channels with all the same controls as the mic channels except for the trim,highpass and the pan control will be a stereo balance control. A stereo main output level controls will also be available. A control room and headphone output and level control shall also be provided. The MDR1064 uses an external power supply.