Salvajor SMR Installation Manual

A. J. ANTUNES & CO. www.ajantunes.com 180 Kehoe Blvd., Carol Stream, Illinois 60188

SMR Installation Information

IMPORTANT

Please read these instructions carefully to assure
correct installation. This equipment must be
installed by a licensed electrician. Prior to being
put into operation, check all wiring and function of
the unit.

Specifications

Electrical: 10A @ 125 VAC.; 8A @ 250 VAC.; 7A @ 277

VAC. (Resistive); 1/8HP @ 125 VAC; 1/4HP @ 250 VAC.
Pilot Duty, 125VA @ 125/277 VAC.

Max. Surge Pressure: 20” W.C.

Max. Ambient Temperature: 170°F (77°C)

Min. Ambient Temperature: -40°F (-40°C)

Shipping Weight: 1 lbs. (.45 kg)

Options:

1/4” Barb

1/4” Tube

1/4” Compression

Dimensions

3 19/32”
(91 mm)

4 13/32”

(112 mm)

1/2” Conduit

Knockout

Reset

Button

Mounting Hole

for #8 Screw

Standpipe With

Adjusting Screw

Reset
Button

2 1/4”

(57 mm)

Inlet Connections

3”

Negative (Vacuum) Inlet

Positive (Pressure) Inlet

Note: Dimensions are
for reference only.

1-630-784-1000 Fax: [phone] Page 1 of 2 P/N 1011098 06/10
1-800-253-2991

A. J. ANTUNES & CO. www.ajantunes.com 180 Kehoe Blvd., Carol Stream, Illinois 60188

SMR Installation Information

Warranty

1. Antunes Controls products are guaranteed to be free
from mechanical and electrical defects for a period of
one year from date of shipment under normal use and
service provided installation is made in accordance
with manufacturers’ recommendations.

2. Parts deemed defective shall be repaired or replaced
at manufacturers option and at manufacturers expense
but shall not include foreign or federal excise taxes,
state or municipal sale or use taxes, all such taxes
not limited to the foregoing being responsibility of the
purchaser.

3. No charge for travel and/or mileage will be allowed to
purchaser.

4. Antunes Controls reserves the right to make changes
in design or make any improvements on any products.
The right is always reserved to modify our equipment
because of new technology, underwriter’s requirements
and/or government regulations.

Limitation of Liability: If it is understood and agreed

that seller’s liability whether in contract, in tort, under

any warranty, in negligence or otherwise, shall not

exceed the return of the amount of the purchase price

paid by purchaser and under no circumstances shall

seller be liable for special, indirect or consequential

damages. The price stated for the equipment is a

consideration in limiting seller’s liability. No action,
regardless of form, arising out of the transactions may
be brought by purchaser more than one year after the

cause of action has accrued.

5. The following are not covered under warranty:

a. Failure from neglect, abuse, careless handling and

mis-application of unit.

b. Failure to observe guidelines for installation or

improper voltage hook-up.

c. Failure caused by improper maintenance.

d. Unless specifically allowed by Antunes Controls, no

other charges may be included under warranty.

A.J. Antunes & Co.

Headquarters/Manufacturing

180 Kehoe Boulevard

Carol Stream, Illinois 60188 USA

Phone [phone]

Toll Free [phone]

Fax: [phone]

Antunes Equipment

Manufacturing (Suzhou) Ltd.,

9 Hou Ju Road, Building #24,

S&T Park, SND

Suzhou, Jiangsu, China 215011

Phone: [phone]

Fax: [phone]

www.ajantunes.com

1-630-784-1000 Fax: [phone] Page 2 of 2 P/N 1011098 06/10
1-800-253-2991