Salvajor S419 User Manual

Trough Collector

Job: Item No.:

Model S419

A Trough Conveying and

Food Waste Collecting System

Widely accepted in areas that restrict

the use of food waste disposers.

Recirculated Water used for scrapping
typically reduces water and sewer costs
dramatically. The Trough Collector consumes
only 2 gallons of new water per minute.

Trough Water Velocity with the Trough
Collector is 70 gallons per minute.
This velocity swiftly propels food waste down
the trough and into the Collector with no
additional hand movement, leaving both
hands free for high-volume scrapping.
The Trough Collector will let you keep up
with large conveyor or flight dishmachines.

Design Flexibility is offered by the
Collector as troughs can turn one or more
corners and have wider troughs for soaking
problem dishes.

Wider and Longer Troughs can be
designed because of the Collectors high
water velocity which allows you to soak
problem dishes or add gusher heads to
pre-rinse compartmental trays.

T Y P I C A L I N S T A L L A T I O N S

Model S419

Trough Collector Model S419

143/4"

(37.47)

4

5

/8"

(11.75)

45/8"

(11.75)

LEFT SIDE VIEW

C

D

327/8" (83.43)

ADJUSTABLE TO

36

7

/16" (92.55)

17

1

/8"

(43.42)

25/8"

(6.69)

FRONT VIEW

A

B

22" (55.88)

MINIUMUM

CLEARANCE

OVERHEAD

FOR BASKET

REMOVAL

AIR GAP

ONE BASKET PROVIDED WITH UNIT

Additional basket recommended at additional cost

SCRAP BASKET
DIMENSIONS
18

9

/16" Dia. x 131/4" High

(47.2) Dia. x (33.7) High

WE SUGGEST THE USE
OF RUBBER GUSHER
HEADS ALONG THE
TROUGH FOR SCRAPPING
AND PRE-FLUSHING.
(OPTIONAL AT ADDITIONAL COST)

FABRICATED TROUGH
(NOT FURNISHED), MUST HAVE
MATCHING FLANGE TO ATTACH
TO MODEL S419. (SEE DETAIL "B")

11/2"
PLUMBING
FITTINGS
AND VALVE
(SEE DETAIL "C")

3

/4" PIPE AND VALVE

(SEE DETAIL "C")

TROUGH CONNECTION
(SEE DETAIL "B")

CONTROL
PANEL
CAN BE
MOUNTED
ON LEFT
OR RIGHT.

WATER DIFFUSER FURNISHED.
2" DIA. HOLE REQUIRED
IN BACK OF TROUGH.
(SEE DETAIL "A")

DETAIL "A"_WATER DIFFUSER

TROUGH
SECTION

3" MIN.
DEPTH

DIFFUSER

LOCKNUT

GASKET

DETAIL "B"_TROUGH

CONNECTION FLANGE

5

1

/2"

(14.0)

R

1

/4"

(R.63)

4 "

(10.2)

8

3

/4"(22.2)

5

3

/4"(14.6)

TOP VIEW

221/2"

(57.15)

12

1

/4"

(31.11)

ø

19

1

/4"

(ø48.84)

TABLE CUTOUT DETAIL

121/4"

(31.11)

6

1

/2"

(16.51)

ø

20"

(ø50.75)

DETAIL "C" RECIRCULATION PLUMBING

RECIRCULATION
PLUMBING
NOT FURNISHED

Trough Collector Legend

A

Tank drain 2” NPT

●

B

1/2” conduit knockout electrical connection

●

C

Hot/cold shutoff valves 1/2” NPT

●

D

Removable Top

●

Note: Add 6”
from back of
trough to wall
for recirculation
piping.

F

SLOTS

3

/8" x 1"

(

.95 x 2.54

)

9

7

/8"

(

25.08

)

2

3

/4"

(

6.99

)

5

"

(

12.70

)

11

"

(

27.94

)

4"

(

10.16

)

8

"

(

20.32

)

5

"

(

12.70

)

5

/8"

(

1.59

)

60°

90°

Trough Collector Model S419

MSS-LD Control

The MSS-LD control can be mounted on either side of

the Collector with existing fasteners, mounting holes

and wiring for left or right hand operation.

#980104

Upon request, the Collector top may
be shipped separately to an alternate
location for fabrication.

MSS-LD

Mounting

Bracket

The control can be mounted remotely

using optional mounting bracket.

Note: additional field wiring is necessary.

Remote Mounting
of MSS-LD Control

2” TANK DRAIN
(Piping not furnished)

ALL CONNECTIONS ARE TO BE MADE BY

QUALIFIED PERSONNEL WHO WILL OBSERVE

ALL LOCAL AND NATIONAL CODES.

NOTE: Dimensions in parenthesis are in centimeters

The Trough Collector top can be rotated in 15 degree

increments to ease common installations as well as improve

design flexability without the need of costly tank modifications.

Salvajor Trough Collector

MODEL S419

S P E C I F I C A T I O N S

CONSTRUCTION

■ Tank - 2 Piece Stainless Steel

■ Adjustable Legs - Stainless Steel

■ Control Panel - Stainless Steel

■ Salvage Basin - High Impact Polymer

■ Scrap Basket - High Impact Polymer

ELECTRICAL

■ Pre-wired NEMA 4 Control Panel

■ Watertight Conduit /Fittings

■ Separate Component Grounding

■ Thermally Protected Motor

■ Safety Line Disconnect

PLUMBING

■ Corrosion Resistant Components

■ Automatic Water Blender

■ Solenoid Valve

■ Unions

■ Check Valves

■ Incoming Water Valves

■ Non-clogging Pump Design

■ Backflow Prevention Device

ACCESSORIES

■■

Remote

■■

Remote Mounting Bracket

■■

Correctional Package

■■

MSS-LD Mounting Bracket

■■

Additional Scrap Basket

Start-Stop

VOLTAGES AVAILABLE

(

SPECIFY EXACT OPERATING VOLTAGE

■■ 115V ■■ 208V ■■ 230V,

60 Cycle, 1 Phase

■■ 208V ■■ 230V ■■ 460V, 60 Cycle, 3 Phase

Pump Motor

3/4 HP

)

FULL LOAD AMPS

(

SPECIFY EXACT OPERATING VOLTAGE

1 PHASE 3 PHASE

115V 208V 230V 208V 230V 460V

11 5.5 5.5 3.2 3 1.5

)

UTILITIES REQUIRED

1. Electric service

2. 3/4" hot and cold water supply and

reduce to 1/2" at connection.

3. 2" tank drain.

(Specifications subject to change without notice. )

SAMPLE SPECIFICATIONS

Unit shall be a Salvajor Trough Collector, a complete
scrapping, pre-flushing and food waste collecting
system with recirculating water as manufactured
by Salvajor.

Model S419,____Volts, 60Hz, ___Phase.

Furnished with a pre-wired control panel and
stainless steel NEMA 4 watertight enclosure.

The Salvajor Company 4530 East 75th Terrace Kansas City, Missouri 64132-2081, USA

1-800-SALVAJOR [phone] FAX:[phone]

www.salvajor.com Email: [e-mail] [e-mail]

Manu fa cture rs of C om merci al Food W aste Di sposi ng Syst ems s in ce 19 44

Printed in USA

Form No.S419-9-BH