Salvajor P914 User Manual

Scrap Collector

Job: Item No.:

Model S914

Job: Item No.:

A Scrapping, Pre-Flushing and

Food Waste Collecting System

■ Standard Scrap Basin, Model S914

■ Pot/Pan Scrap Basin, Model P914

Widely accepted in areas that restrict

the use of food waste disposers.

An Economical Pulper Alternative,
the Collector washes soluble food waste
harmlessly through the sewer, reducing
bulk food waste by as much as 50% and
weight by as much as 80%.

Recirculated Water used for pre-flushing
typically reduces water and sewer costs
dramatically. The Collector consumes only
2 gallons of new water per minute while the
pre-flushing water plume recirculates at
a 30-gallon rate.

Scrapping Speed is more than doubled
compared to an overhead pre-rinse since
the worker’s hands are free for scrapping.
The Collector lets you keep up with small
to medium size conveyor dishmachines.

Problem Dishes, Trays and Cookware

with dried or baked-on food need much
less hand work. They can be soaked in the
Collector basin while scrapping continues
on other dishes.

Model P914

T Y P I C A L I N S T A L L A T I O N S

Model S914

Model P914

Scrap Collector Model S914

241/2"

(62.23)

211/2"

(54.61)

TOP VIEW

211/2"

(54.61)

2613/16"
(68.10)

TABLE CUTOUT DETAIL

221/4"

(56.52)

243/4"

(62.87)

143/16"
(36.03)

3215/16" (83.66)

ADJUSTABLE TO

35

15

/16" (91.28)



4

5

/8"

(11.75)

181/8"

(46.10)

149/16"
(37.01)

45/8"

(11.75)

24"

(60.91)

611/16"

(17.02)

1

7

/16"

(3.70)

FRONT VIEWLEFT SIDE VIEW

D

E

C

A

B

22

1

/16" (56.00)

MINIUMUM

CLEARANCE

OVERHEAD

FOR BASKET

REMOVAL

AIR GAP

ONE BASKET PROVIDED WITH UNIT

Additional basket recommended at additional cost

SCRAP BASKET
DIMENSIONS
18

9

/16" Dia. x 131/4" High

(47.2) Dia. x (33.7) High

24 1/2"

(62.23)

211/2"

(54.61)

TOP VIEW

3215/16"
(83.66)

381/2"

(97.79)

TABLE CUTOUT DETAIL

221/4"

(56.52)

361/2"

(92.78)

Pot/Pan Scrap Collector Model P914

Model S914

Model P914

Collector Legend

A

Plume height adjustment valve

●

B

Tank drain 2” NPT

●

C

1/2” conduit knockout electrical connection

●

D

Hot/cold shutoff valves 1/2” NPT

●

E

Removable Top

●

F

Model S914 shown - P914 similar

SLOTS

3

/8" x 1"

(

.95 x 2.54

)

9

7

/8"

(

25.08

)

2

3

/4"

(

6.99

)

5

"

(

12.70

)

11

"

(

27.94

)

4"

(

10.16

)

8

"

(

20.32

)

5

"

(

12.70

)

5

/8"

(

1.59

)

Scrap Collector Model S914
Pot/Pan Scrap Collector Model P914

#980104

MSS-LD

Mounting

Bracket

MSS-LD Control

The MSS-LD control can be mounted on either side of
the Collector with existing fasteners, mounting holes
and wiring for left or right hand operation.

Upon request, the Collector top may
be shipped separately to an alternate
location for fabrication.

The control can be mounted remotely

using optional mounting bracket.

Note: additional field wiring is necessary.

Remote Mounting

of MSS-LD Control

2” TANK DRAIN
(Piping not furnished)

Model S914 shown - P914 similar

ALL CONNECTIONS ARE TO BE MADE BY

QUALIFIED PERSONNEL WHO WILL OBSERVE

ALL LOCAL AND NATIONAL CODES.

NOTE: Dimensions in parenthesis are in centimeters

Salvajor Scrap Collector

MODEL S914 & Model P914

S P E C I F I C A T I O N S

CONSTRUCTION

■ Tank - 2 Piece Stainless Steel

■ Adjustable Legs - Stainless Steel

■ Control Panel - Stainless Steel

■ Salvage Basin - High Impact Polymer

■ Scrap Basket - High Impact Polymer

ELECTRICAL

■ Pre-wired NEMA 4 Control Panel

■ Watertight Conduit/ Fittings

■ Separate Component Grounding

■ Thermally Protected Motor

■ Safety Line Disconnect

PLUMBING

■ Corrosion Resistant Components

■ Automatic Water Blender

■ Solenoid Valve

■ Unions

■ Check Valves

■ Incoming Water Valves

■ Non-clogging Pump Design

■ Backflow Prevention Device

ACCESSORIES

■■

Remote Start-Stop

■■

Remote Mounting Bracket

■■

Correctional Package

■■

MSS-LD Mounting Bracket

■■

Additional Scrap Basket

VOLTAGES AVAILABLE

(

SPECIFY EXACT OPERATING VOLTAGE

115V ■■208V ■■230V,

■■

208V ■■230V ■■460V, 60 Cycle, 3 Phase

■■

Pump Motor

3/4 HP

60 Cycle, 1 Phase

)

FULL LOAD AMPS

(

SPECIFY EXACT OPERATING VOLTAGE

1 PHASE 3 PHASE

115V 208V 230V 208V 230V 460V

11 5.5 5.5 3.2 3 1.5

)

UTILITIES REQUIRED

1. Electric service

2. 3/4" hot and cold water supply and

reduce to 1/2" at connection.

3. 2" tank drain.

(Specifications subject to change without notice.)

SAMPLE SPECIFICATIONS

Unit shall be a Scrap Collector (or Pot/Pan Scrap
Collector) scrapping, pre-flushing and food waste
collecting system with recirculating water as
manufactured by Salvajor.

Model S914 (or P914),____Volts, 60Hz, ___Phase.

Furnished with a pre-wired control panel and
stainless steel NEMA 4 watertight enclosure.

The Salvajor Company 4530 East 75th Terrace Kansas City, Missouri 64132-2081, USA

1-800-SALVAJOR [phone] FAX:[phone]

www.salvajor.com Email: [e-mail] [e-mail]

Manufac tu re rs of C om mercial F oo d Waste D is posing Sy st ems sin ce 1 944

Form No.S&P914-9-BH

Printed in USA