Salvajor H.P 200 Specifications
2 HP Model 200
JOB:
Item No.:
FOOD WASTE DISPOSER
SPECIFICATIONS
CORROSION RESISTANT BODY
Permanent molded from heat treated aluminum alloy.
EXTENDED LIP WATER SEAL
Protects the motor from damage by water.
TAPERED ROLLER BEARING
Provides longer motor life, quiet operation and
shock absorbing.
WATER COOLED MOTOR
Provides maximum efficiency and longer life.
QUIET OPERATION
Extra thick rubber mounting adaptor and drain outlet
isolates sound and eliminates vibration.
NEMA 4 Watertight Controls
MSS
MRSS
Cone Assembly
TABLE CUT-OUT:
12” CONE - 12 7/8”
15” CONE - 15 7/8”
18” CONE - 18 7/8”
CONE COVER
SCRAP
RING
FOOD WASTE
DISPOSER
NOTE: INSTALL PER ALL APPLICABLE CODES
ALL PIPING
OPTIONAL
½" FIXED
NOZZLE
½"
2" DRAIN
DISPOSER
CONTROL
FULL LOAD AMPS
q 115 Volts 1 Phase 24 Amps
VACUUM
BREAKER
SOLENOID
VALVE W/
WATER
FLOW
CONTROL
ARSS-2
Optional Line Disconnect (LD) available on MSS, MRSS, & ARSS
ARSS
q 208 Volts 1 Phase 12.1 Amps
q 230 Volts 1 Phase 12.0 Amps
q 208 Volts 3 Phase 6.6 Amps
q 230 Volts 3 Phase 6.0 Amps
q 460 Volts 3 Phase 3.0 Amps
u SPECIFY EXACT OPERATING VOLTAGE u
Salvajor Model 200
Food Waste Disposer 2 HP – 1 Phase & 3 Phase
DETAILS AND DIMENSIONS
SPECIFICATIONS:
MOUNTING – Rubber adaptor above grind chamber
and rubber drain outlet isolates sound and eliminates
vibration. No metal to metal contact.
EXTERIOR HOUSING – Permanent molded from
heat treated, corrosion resistant aluminum alloy then
computer machined to a smooth polished finish. Paint free.
SHREDDER – 8 inch diameter, machined high strength,
wear resistant hardened carbide alloy.
ROTOR – 8 inch diameter with 4 cutter bars, machined
high strength, wear resistant hardened carbide alloy.
MOTOR – 2 HP totally enclosed. Water cooled for
efficiency and longer life. Built-in manual reset thermal
overload protection. Available in 208 volts or 115/ 230
volts, 60 cycle, 1 phase and 208-230/460 volts, 60 cycle,
3 phase.
BEARINGS – Tapered roller (top)
Sealed ball (bottom)
SEAL – Extended Lip Water Seal.
WATER REQUIREMENT – 5 gallons of cold
water per minute.
WASTE OUTLET – Rubber drain accepts 2” piping.
1
/2" FIXED
NOZZLE
55/8" (14.29)
1
/2" (21.64)
8
7
21
/16"
(54.48)
3
1/2" (8.89)
SINK OPENING
1
/2" (21.64)
8
13
15
/16"
(40.19)
1
/2" NPT
WATER INLET
2"
DRAIN
31/2" SINK MOUNT
1
/2" NPT
WATER INLET
2"
DRAIN
18" CONE
13
/16" (52.89)
20
18" (45.72)
61/2"
(16.51)
13"
(33.02)
1
/2"
8
(21.52)
13"
(33.02)
81/2"
(21.52)
5
/8" (14.32)
5
POWER
ENTRANCE
RESET
BUTTON
55/8" (14.32)
POWER
ENTRANCE
14
(35.93)
3
/4" (1.91)
9
(23.54)
15" CONE
17
7/8" (45.40)
15" (38.10)
5
6
1
/8"
1/2"
(16.51)
5/8" (14.29)
12" CONE
14
7/8" (37.78)
12" (30.48)
5
6
1/2"
(16.51)
5/8" (14.29)
61/2" SINK MOUNT
1
/4"
6
5/8" (16.83)
CUTOUT
ADJUSTABLE LEG
(OPTIONAL)
DUAL DIRECTION GRINDING – Designed
to operate in either direction. Direction of rotation can be
controlled when installed with automatic reversing controls.
Reversing rotation can double cutting teeth life.
LEG SUPPORT
(
Optional
)
– Single leg, adjustable.
ASSEMBLIES: (See Specification Sheet)
CA – Cone Assembly with 12”, 15” or 18” Cone
SA – Sink Assembly with 3
1
⁄2” or 61⁄2” Sink Collar
DISPOSER CONTROLS: (See Specification Sheet)
MSS: (Non Reversing)
MRSS: (Manual Reversing)
ARSS-2: (Automatic Reversing)
ARSS: (Automatic Reversing with Water Saver)
The Salvajor Company 4530 East 75th Terrace Kansas City, Missouri 64132-2081, USA
1-800-SALVAJOR (816) 363-1030 FAX: 1-800-832-9373
www.salvajor.com Email: sales@salvajor.com service@salvajor.com
Manufacturers of Commercial Food Waste Disposing Systems since 1944
RESET
BUTTON
NOTE: Dimensions in parenthesis are in centimeters
Current specification details may be found online at www.salvajor.com
(Specifications subject to change without notice)
93/16"(23.34)
to
11
/16"(37.29)
14
SAMPLE SPECIFICATION
200 - CA- 18 MSS (230/60/3)
Model Cone Disposer
u SPECIFY EXACT OPERATING VOLTAGE u
Size Control
Assembly
Electrical
Specs.
Printed in USA
Form No.S200 (06-17)
Loading...