Salus Smart Plug SP600 Installation Manual

Smart Plug

Model: SP600

Installation Manual

Introduction

Smart Plugs go directly into an open outlet (like an extension
of the outlet) giving a user connected control over the device
plugged into the equipment. Salus offers standardized Smart
Plugs for EU, UK and U.S. This product must be used with the
Universal Gateway (UG600/UGE600) and the Salus Smart Home
App. Go to www.salus-smarthome.com for the PDF version
of the manual.

Product Compliance

This product complies with the essential requirements and other
relevant provisions of Directive 2014/30/EU, 2014/35/EU, 2014/53/EU
and 2011/65/EU. The full text of the EU Declaration of Conformity is
available at the following internet address: www.saluslegal.com.

Safety Information

Use in accordance with the regulations.
Designed to be used exclusively indoor.
Keep your device completely dry.
Disconnect your device before cleaning it with a dry towel.

SALUS Controls plc

SALUS House
Dodworth Business Park South,
Whinby Road,
Dodworth, Barnsley S75 3SP, UK.

Sales: T: [phone]
E: [e-mail]

Technical: T: [phone]
E: [e-mail]

www.salus-controls.com

SALUS Controls is a member of the Computime Group

Maintaining a policy of continuous product development SALUS Controls plc
reserve the right to change specification, design and materials of products
listed in this brochure without prior notice.

Issue Date: May 2016
V0011

Ensure your socket switch
is permanently on.

V = 230AC 50HZ
A = 13 Amp max.

After initialisation the LED will start
flashing continuously.

1

3

3

The LED will

go off.

Exit gatewayOperating the Plug

If you want to exit the gateway, follow the
steps below.

Press the button

for 10 seconds.

Will flash red

5 times.

Via the App Via the Plug

ON

Via the App

Via the Plug

OFF

- Follow the on screen instructions.

- Once connected, the Smart Plug LED will stop flashing.

4 5 62

3