Salton DM-11 User Manual

DRINK MIXER

Classic “Soda Fountain” Design

MODEL DM-11

1

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be
followed including the following:

1. Read all instructions.

2. To protect against electrical hazards, do not immerse cord, plugs, or the
appliance in water or other liquid.

3. Close supervision is necessary when any appliance is used by or near
children.

4. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or has been damaged in any manner. Return
appliance to the factory for examination, repair or adjustment. See
Warranty.

5. Do not operate the Salton Drink Mixer without the Cup. Do not use any
Cup other than the one provided with the Mixer.

6. The use of accessory attachments not recommended by Salton may
cause hazards.

7. Unplug the Salton Drink Mixer before cleaning or when not in use.

8. Do not use outdoors.

9. Do not let cord hang over edge of table or counter, or touch hot surfaces.

10. Do not place on or near a hot gas or electric burner, or in a heated oven.

11. Do not use appliance for other than intended household use.

SAVE THESE INSTRUCTIONS

2

DESCRIPTION OF PARTS

1. Aerator Mixing Blade

(Stainless Steel)

2. Maximum Fill Line

3. Motor Housing

4. Micro Switch

5. Stainless Steel Cup

6. Cup Bracket

7. Weighted Base

OPERATING INSTRUCTIONS

1. Place the Salton Drink Mixer on a level, dry surface. Plug the appliance
into a 120 Volt outlet.

2. Combine ingredients for milk shake, fruit drink or other beverage in the
Stainless Steel Cup provided with the Drink Mixer. Do not fill beyond
Maximum Fill Line.

3. Place the Cup onto the Drink Mixer ensuring the top of the Cup contacts
the Micro Switch which will automatically activate the mixer. Rest the Cup
on the Cup Bracket.

4. When the ingredients are fully combined remove the Cup from the Drink
Mixer. It will automatically disengage the Micro-Switch and turn off the
appliance.

NOTE: NO MORE THAN ONE MINUTE IS REQUIRED FOR MAKING ANY
DRINK

CARE & CLEANING

1. To clean the Aerator Mixing Blade, fill the Cup with 1 cup of warm water.
Operate the Salton Drink Mixer as previously described in operating
instructions.

2. Wipe the Motor Housing with a damp cloth. Ensure that the cloth is not
excessively wet and that no moisture is able to enter the Motor Housing.

3. Wash the Cup in warm soapy water, rinse and allow to dry.

WARNING: Never immerse the Salton Drink Mixer in water or any other liquid.

3