Salton BL-1051 User Manual

®

professional

power blender

Instruction Booklet

Model: BL-1051

IIMMPPOORRTTAANNTT SSAAFFEEGGUUAARRDDSS

When using electrical appliances, basic safety precautions should always
be followed including the following:

1. Read all instructions.

2. To protect against electrical hazards, do not immerse cord, plugs,
or the appliance in water or other liquid.

3. Close supervision is necessary when any appliance is used by or near children.

4. Unplug from outlet when not in use before putting on or taking off parts
and before cleaning.

DO NOT operate any appliance with a damaged cord or plug or after

5.
the appliance malfunctions, or is dropped or damaged in any manner.
Return appliance to Salton for examination, repair or electrical or
mechanical adjustment. See “Warranty” section.

6. Avoid contacting moving parts.

7. Keep hands and utensils out of Glass Blender Jar while blending to reduce
the risk of severe injury to persons or damage to the Blender. A scraper
may be used but must be used only when the blender is not running.

8. Blades are sharp. Handle carefully.

9. To reduce the risk of injury, never place the Cutter Blade Assembly on
the base without the jar properly attached.

10. Always operate the blender with the cover in place.

11. When blending hot liquids, remove the Filler Cap.

12. The use of accessories or attachments, not recommended or sold by
Salton may cause fire, electric shock or injury.

13. DO NOT use outdoors.

14.

DO NOT let cord hang over edge of table or counter, or touch hot surfaces.
DO NOT place on or near a hot gas or electric burner, or in a heated oven.

15.

16. Always attach plug to appliance first, then plug cord into the wall outlet.
To disconnect, turn any control to ‘OFF’, then remove plug from wall outlet.

17. Extreme caution must be used when moving an appliance containing
hot liquids.

18. This appliance is for Household Use Only.
than intended use.

DO NOT leave unit unattended while in use.

19.

DO NOT use appliance for other

SSAAVVEE TTHHEESSEE IINNSSTTRRUUCCTTIIOONNSS

HOUSEHOLD USE ONLY

2

GROUNDED PLUG

To reduce the risk of electric shock this appliance has a grounded plug
(2 blades and 1 pin). If the plug does not fit fully into the electrical outlet
contact a qualified electrician.
an adaptor.

DO NOT modify the plug in any way or use

1

2

DESCRIPTION OF PARTS

1. Safety Locking Pin

2. Filler Cap

3. Lid

4. Glass Blender Jar

5. Cutting Blade Assembly

6. Jar Base
Safety Lock Release Button

7.

8. Safety Locking Pin Slot

9. Safety Locking Handle

10. Blender Base

11. Control panel
a) Pulse/Ice Crush
b) Hi
c) Low
d) Off

7

11b

3

4

5

6

8

9

10

11a

11c

11d

BEFORE FIRST USE

1. Read all instructions carefully and keep them for future reference.

2. Remove all packaging.

3. Press the Safety Lock/Release button. Gently push the handle backwards.

4. Lift the Blender Jar upwards (do not twist or turn). Wash the Blender
Jar, Lid and Filler Cap in warm soapy water. NOTE: For safety purposes
the Cutting Blade Assembly is designed so it cannot be removed from
the Blender Jar.
Blender Jar by hand as the blades are very sharp.

5. Rinse, dry and reassemble making sure that the handle of the Blender
Jar is aligned with the right edge of the Blender Base.

IMPORTANT: Use extreme caution when cleaning

3