Salton BL-1042 User Manual

‘Lo-profile’ die cast blender

Instruction Booklet

Model: BL-1042

SAL7-555 Booklet Blender Salton BL-1042 _EN VF.qxd 12/06/07 16:55 Page 1

IIMMPPOORRTTAANNTT SSAAFFEEGGUUAARRDDSS

When using electrical appliances, basic safety precautions should always be followed including the following:

1. Read all instructions.

2. To protect against electrical hazards, do not immerse cord, plugs, or the appliance in water or other liquid.

3. Close supervision is necessary when any appliance is used by or near children.

4. Unplug from outlet when not in use before putting on or taking off parts and before cleaning.

DO NOT operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to Salton for examination, repair or electrical or mechanical adjustment. See “Warranty” section.

6. Avoid contacting moving parts.

7. Keep hands and utensils out of Glass Blender Jar while blending to reduce the risk of severe injury to persons or damage to the Blender. A scraper may be used but must be used only when the blender is not running.

8. Blades are sharp. Handle carefully.

9. To reduce the risk of injury, never place the Cutter Blade Assembly on the base without the jar properly attached.

10. Always operate the blender with the cover in place.

11. When blending hot liquids, remove the Filler Cap.

12. The use of accessories or attachments, not recommended or sold by Salton may cause fire, electric shock or injury.

13. DO NOT use outdoors.

14.

DO NOT let cord hang over edge of table or counter, or touch hot surfaces.

15.

DO NOT place on or near a hot gas or electric burner, or in a heated oven.

16. Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to ‘OFF’, then remove plug from wall outlet.

17. Extreme caution must be used when moving an appliance containing hot liquids.

18. This appliance is for Household Use Only.

DO NOT use appliance for other

than intended use.

19.

DO NOT leave unit unattended while in use.

SSAAVVEE TTHHEESSEE IINNSSTTRRUUCCTTIIOONNSS

HOUSEHOLD USE ONLY

SAL7-555 Booklet Blender Salton BL-1042 _EN VF.qxd 12/06/07 16:55 Page 2

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the other).To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.

DESCRIPTION OF PARTS

1. Filler Cap

2. Lid

3. Glass Jar

4. Cutting Blade Assembly

5. Jar Base

6. Blender Base

7. Coupler

8. Control Panel a) Low/Stir b) Mix c) Chop d) Puree e) Ice Crush f) Pulse g) Power

BEFORE FIRST USE

1. Read all instructions carefully and keep them for future reference.

2. Remove all packaging.

3. Remove the Jar Base & Cutting Blade Assembly (see the Care and Cleaning Section). Wash the Jar, Lid, Filler Cap, Jar Base, Gasket and Cutting Blade Assembly in warm soapy water.

NOTE: Be careful when

handling the Cutting Blade Assembly, the blades are sharp.

4. Rinse, dry and reassemble.

5. Wipe the Blender Base with a damp cloth.

DO NOT IMMERSE

THE BLENDER BASE IN WATER OR ANY OTHER LIQUID.

8 f

8 g

8 a 8 b

8 d

8 e

8 c

SAL7-555 Booklet Blender Salton BL-1042 _EN VF.qxd 12/06/07 16:55 Page 3

+ 6 hidden pages