Salora DVP-7021TWIN Instruction Manual
DVP-7021TWIN
Portable DVD player with two 7” LCD screen
MONITOR
MONITOR
PORT 1
PORT 2
SD/DVD
PREV
STOP
NEXT
ME NU
OPEN
Owner’s Manual
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
Notice:
This Product incorporates copyright protection technology that is protected by method claims of certain U.S. Patents and other intellectual
property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
Content
A. Introduction ........................................................................... 1
B. Cautions and Warnings ......................................................
C. Contents ............................................................................... 3
D. Powering and installation .................................................... 3
E. Controls, Indicators, and Connectors .................................
F. Loading and Playing a Disc ................................................
G. Setup.....................................................................................
H. Basic Operation ...................................................................
I. Menu ................................................................................... 14
J. Display................................................................................. 14
K. Variable Playing Mode ...............................................
L. Connecting to other Electronic Equipment..........................
M. Specifications ......................................................................
N. Troubleshooting ..................................................................
1
6
8
9
13
18
24
25
26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
A. Introduction
Thank you for choosing the portable DVD player with twin 7” LCD
screen. The main features include two 7" Wide Screen (16:9 Aspect
Ratio) Liquid Crystal Display (LCD) monitors and a single DVD player.
Please read the entire instruction manual supplied with this product
prior to using. The documentation will assist you in installing the system
properly to obtain the best equipment performance. Please save this
manual for later use.
B. Cautions and Warnings
1. Placement
To prevent fire or electric shock, do not expose this appliance to
rain or moisture. Do not place the set on an unstable cart, stand,
tripod, bracket or table to prevent it from falling. Keep the unit away
from strong magnets, heat sources, direct sunlight, excessive
dust. If the unit is brought directly from a cold to a warm location,
moisture may condense inside the unit. When you move it from a
cold to a warm location, wait for about one hour before operating
the unit, or remove the disc and leave the unit turned on until the
moisture evaporates.
2. Installation
Ensure that 7” the DVD player and monitors are installed in
accordance with the instructions and illustrations provided in this
manual.
3. Caution
Do not push objects of any kind into the unit through openings; do
not spill or spray liquid of any kind on or in the system (this may
result in a fire or electric shock). Do not place anything heavy on
the unit. To ensure proper ventilation and proper operation, never
cover or block the slots and openings with a cloth or other material.
Keep the unit away from an open flame such as fire, candle etc.It is
hazardous to replace the remote control battery incorrectly.Replace the
battery only with the same or equivalent type, in order to protect
1
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
the environment,please dispose the battery properly. Do not use
the unit in temperatures higher than 95 degrees Fahrenheit or 35
degrees Celsius.
4.Disassemble
Do not attempt to disassemble the cabinet. There is a risk of electric shock and/or exposure to Laser Radiation. Contact qualified
service personnel if your system needs repair.
5. Cleaning Unit
When cleaning, make sure the system is unplugged from the power
source. Do not use liquid cleaners or aerosol cleaners. Use a cloth
lightly dampened with water for cleaning the exterior of the system
only.
6. Disc
Do not use irregularly shaped discs such as heart or star-shaped
discs as they may cause the unit to malfunction. Do not stick paper,
tape or glue on the disc. Do not expose the disc to direct sunlight
or heat sources. Do not touch the surface of disc. Handle the disc
by its edge. Clean the disc by wiping the disc from the center out
with a cleaning cloth. Remove the disc from the unit and store it in
its case after playing. Some playback operations of discs may be
intentionally fixed by software producers. Since this unit plays discs
according to the disc contents the software producers designed,
some playback features may not be available. Also refer to the instructions supplied with the discs.
7. Regional Coding
Both the DVD player and disc are coded by region. These regional
codes must match in order for the disc to play. If the codes don’t
match, the disc won’t play. This unit’s code is region 2. DVD’s with
other regional codes cannot be played in this unit.
2
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
C. Contents
1. 1 x DVD Player
2. 2 x 7” Monitors
3. 1 x Remote Control with battery (CR2025)
4. 2 x DIN to AV Adapter
5. 1 x AC to DC Adapter
6. 1 x Cigarette Lighter Adapter
7. 1 x Instruction Manual
8. 1 x Carry Bag
9. 2 x Pouch for 7” single monitor
10. 1 x Pouch for DVD
D. Powering and installation
1. Powering the system indoors (Refer to Figure 1)
Plug one end of the AC to DC adapter into the DC Input jack on the
right side of the DVD player, then plug the other end into the
100~240V AC power receptacle.
2. Powering the system in a car (Refer to Figure 1)
Plug one end of the cigarette lighter adapter into the DC Input jack
on the DVD player, then plug the other end into the cigarette lighter
socket.
Figure 1
3
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
3. Connection with DVD player and monitors (Refer to Figure 2)
7"LCD MONITOR
The single monitors only can be powered by DVD player.
7"LCD MONITOR
MONITOR
MONITOR
PORT 1
PORT 2
SD/DVD
PREV
STOP
NEXT
MEN U
OPEN
Figure 2
Note: Unplug the apparatus when not using for a long time or intent to
disconnect from the Mains power.
4. Installation Prior to use
1) Pouching the DVD player (Refer to Figure 3)
Pull out the slide fastener of the pouch to slide the DVD player into
the pouch, and feed the bottom piece of the DVD into the bottom of
the pouch. Then close the slide fastener.
MONITOR
MONITOR
PORT 2
PORT 1
SD/DVD
PREV
STOP
NEXT
ME NU
OPEN
Figure 3
4
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
2) Positioning the Monitor
Option 1 Vehicle Headrest (Refer to Figure 4)
Figure 4
Slide screen in to the case with display pointing out Squeeze the
magic tape between tilting foot and display and fix on back side.Then
loop the strap of the pouch around the headrest in the vehicle and
pull the end of the strap while holding the buckle until the pouch is
tightly secured.
Option 2 Flat Surface (Refer to Figure 5)
Figure 5
Rotate the base of Monitor backward and place it on a flat surface.
Adjust the screen for a proper viewing angle. This can be done with
the Monitor inside or outside the pouch.
5
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
E. Controls, Indicators, and Connectors
1. Unit View (Refer to Figure 6)
22
21
MONITOR
12
SD
13
14
VOL
15
16
17
DC 9V
18
PORT 1
19
Figure 6
MONITOR
PORT 2
1
SD/DVD
PREV
NEXT
2
3
STOP
4
5
M EN U
6
7
8
9
10
11
OPEN
20
1)
SD/DVD
2) Previous Button
Stop
3)
Button
Next Button
4)
5) Menu Button
6) Up button
7) OK Button
8) Right Button
9)
Left
Button
10)
Down Button
Open Button
11)
12)
Power On/ Off Switch
13)
SD Card
14)
Volume Control
15)
HiFi Jack
Optical Jack
16)
17)
AV Out Jack
18)
DC 9V Input Jack
Remote Control Sensor
19)
20)
Power
21)
Monitor Port 1
22)
Monitor Port 2
LED
6
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
2. Single Monitor View (Refer to Figure 7)
Figure 7
1). Brightness Up/Down Control
2). Power Off/On Switch
3). AV In Jack
4). DC 9-12V Input Jack
5). Headphone Jack
6). Up/Down Switch
7). Volume Up/Down Control
NOTE: Press the Up/Down Switch, you can reverse the screen
image.
7
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
3. Remote Control View (Refer to Figure 8)
1) Setup Button
2) Up Button
3) Skip Button
4) Enter Button
5) Reverse/Left Keypad
6) DOWN Button
7) Numeric Button
8) Display Button
9) Zoom Button
10)
DVD/SD Button
11) Skip Button
12) A-B Repeat Button
13) Forward/Right Keypad
14) 1/All Repeat Button
15) Stop Button
16) Menu Button
17)
Sub
18)
Audio Button
Button
Figure 8
19) Play/Pause Button
F. Loading and Playing a Disc
a. After connecting power to the unit, power on “DVD player” with the
power switch. The power indicator will light.
b. Open the disc tray by pressing OPEN, and place a disc into the
tray with the label side facing up.
c. Close the tray by pressing the “CLOSE” button.The unit will load
the disc and start playing.
d. Rotate BRIGHTNESS and VOLUME to adjust the LCD’s bright-
ness and the DVD player’s volume.
e. To stop playing a disc, press STOP.
8
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
G. Setup
1. General Setup Page
1)With no disc inside the player, press ‘SETUP’ to display the Main screen
of the Setup Menu on the screen and “General Setup Page” appears. At
the same time, “ ” is highlighted. Press ‘SETUP’ again to exit the
Setup Menu and the unit will resume it’s last playback mode.
2)Press the ENTER button, “SPDIF Output” is highlighted.
3) Press the or button to select the other menus in general setup
page.
4) Press
to enter the sub menu.
5) Press the or button to select the sub menu and press the
ENTER to confirm your selection.
6) Repeat steps 3-5 for other menus.
Note: Press
to return the previous menu.
a) SPDIF Output
* SPDIF Off: The digital signal audio output will be off.
* SPDIF/RAW: The audio output will be not modulated.
* SPDIF/PCM: The audio output will be modulated in Pulse Code
Modulation mode.
b) TV Display
* Normal/PS: When the player outputs signal to a normal TV, a nor-
mal picture is shown on the full screen.
* Normal/LB: When the player outputs signal to a normal TV, a nor-
mal picture is shown on the screen with a black strip at both the top
and bottom of the screen.
* Wide: When the player outputs signal to a wide screen TV, a
wide picture is shown on the full screen.
9
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
c) Angle Mark
* On: The screen will show the angle mark icon. (*If an angle option is
available).
* Off: The screen will not display the Angle Mark
NOTE: Not all discs contain above features. The above features are
disc dependent.
d)Osd Language
Chosse different language as your OSD language
e). Screen Saver
*On: Enables screen saver
*NOTE: The DVD player will enter the Screen Saver mode after approximately five minutes if the same image remains on the screen.
*Off: Disables screen saver (off)
f) Last Memory
*On: The unit will return to the last position on the disc.
*Off: The unit will not return to the last position on the disc.
Note: The Last position memory function only effect for OPEN
operation.
2.Video Quality Setup
1)In Setup menu, Press the or button to select “Video Quality Setup”
and is highlighted. Press ENTER to enter the video quality setup
page.
2)Press the ENTER button, “Brightness” is highlighted.
3)Press the or button to select the other menus in video quality
setup page.
4) Press
to enter the sub menu.
5) Press the or button to adjust the quantity and press the ENTER
to confirm your selection.
6) Repeat steps 3-5 for other menus.
Note: Press
to return the previous menu.
a) Brightness b) Contrast
c) Hue d) Saturation
10
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
3. Password
In Setup menu, Press the or button to select “Password Setup
Page” and
is highlighted. Press ENTER to enter the password page.
Press ENTER twice to enter the Password Change Page. Input the Old
Password or the Default Password, the New Password, and the Confirmed New Password. Press ENTER to confirm the change.
Note: The default password is 3308.
4. Preference Page
1) In Setup menu, Press the or button to select “Preference Page”and
is highlighted. Press ENTER to enter the preference page.
2)Press the ENTER button, “Audio” is highlighted.
3)Press the or button to select the other menus in preference
page.
4) Press
5) Press the or button to select the sub menu and press the
ENTER to confirm your selection.
6) Repeat steps 3-5 for other menus.
Note: Press
a) Audio b) Subtitle
c) Disc Menu
Note: Language and subtitle selection is only available for discs that
are recorded in the above listed languages. If the selected language
is not available, the player will play and display on the screen the
original recorded language contained in the disc.
to enter the sub menu.
to return the previous menu.
11
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
d) Select ‘Parental’ using the UP/DOWN button, then press RIGHT to
enter the submenu.
Select the parental level you desire using the UP/DOWN button for
discs with lock-out function or multiple rating levels. These are listed
from the lowest level (1 Kid Safe) to the highest level (8 Adult). Press
ENTER and input 4 digit password, then press ENTER again to confirm the parental level setting.
NOTE: The level of 8 Adult is the factory default.
e) Select ‘Default’ using the UP/DOWN button, then press RIGHT to en-
ter the submenu. Press ENTER to make the setting return to the factory-set mode.
NOTE: The parental setting is not affected by the default reset
function.
NOTE: The Default Password is 3308. This password is always
effective even after you have selected your own password and
changed it. To avoid the possibility of others using the default
password to set the parental level and change the password,
you can record this default password in another area and
delete it from this manual. Some discs can be limited depending on the age of users while some discs cannot.
12
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
H. Basic Operation
POWER
OPEN
PLAY
PAUSE
STOP
NEXT
PREVIOUS
FORWARD
REVERSE
LEFT/RIGHT/UP/DOWN
ENTER
NUMBERS
Turn the unit on/off
Remove/load the disc
Start Play/Execute item or setting
Still Picture
(1 time) Stop at the present playing point /
(2 times) Stop playing
Go to the next chapter, track or scene during play back
Go back to the previous chapter, track or
scene during play back
Scan forward at 2, 4, 8,16 or 32 times speed
Scan backward at 2, 4, 8, 16 or 32 times
speed
Used for Menu Navigation
Execute item or confirm setting
Select item or setting
MENU
REPEAT
A-B
DISPLAY
ANGLE
SUBTITLE
AUDIO
ZOOM
SETUP
Display the main menu of the disc
Repeat playing title, chapter, or track
Repeat a specific portion from point A to point
B of the disc
Display information (title, chapter, track,
time, etc.).
Change the viewing angles on the scene
Select the subtitle language and turn it on/
off
Select the audio language
Enlarge an image to 2, 3, or 4 times the
original size.
Display the setup menu to select and set
items, and exit the setup menu.
13
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
I. Menu
Title Elapsed
Title Remain
Chapter Elapsed
A DVD is divided into sections called titles and chapters. When you
play a DVD, a root menu of the disc will appear on the screen of your
TV or Monitor. The contents of the menu vary from disc to disc. Press
MENU during playback to display the menu. Some DVDs only allow
you to select disc playback options using the DVD root menu.
J. Display
1. PLAYING TIME AND REMAINING TIME
a. During playback press the ‘DISPLAY’ button to display the cur-
rent Title Number (1), the total Number of Titles (2), the current
Chapter Number (3), the total Number of Chapters (4), and the
Playing elapsed Time for the title (5). The heading will disappear
automatically after 3 seconds if DISPLAY button is not pressed.
Title, Chapter Number, and Time Screen Display
b. Press ‘DISPLAY’ constantly to choose the options below circularly.
Title Elapsed: The elapsed time of the title
Title Remain: The remaining time of the title
Chapter Elapsed: The elapsed time of the chapter
Chapter Remain: The remaining time of the chapter
Display Off: The DVD’s time Information will not be displayed.
Display Off
Chapter Remain
14
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
2. ANGLE
During playback of a disc, press ‘ANGLE’ to display the available angles
for discs containing multi-angles*, with the current angle number (1)
and the total number of angles (2) displaying. Press ‘ANGLE’ to select
another angle, then press again to exit and return to the normal viewing angle. The angle display will disappear automatically if the ‘ANGLE’
button is not pressed again within 3 seconds.
*NOTE: Not all discs contain this feature.
Angle Screen Display
3. SUBTITLE
During disc playback press ‘SUBTITLE’ to select the subtitle language
you desire*, with the current Subtitle Language Number (1) and the
total Number of Subtitle Languages (2) displayed. If there are multiple languages press ‘SUBTITLE’ again to select another subtitle language. To turn subtitles OFF, press the ‘SUBTITLE’ button until ‘Subtitle Off’ is displayed. The Subtitle display will disappear automatically
if the ‘SUBTITLE’ button is not pressed again within 3 seconds.
Subtitle Screen Display
* Some DVDs only allow access to this function through the DVD menu
15
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
4. AUDIO
During playback press ‘AUDIO’ to select the audio language you
desire*, with the current Audio Channel Number (1) and the total number of Audio Channels (2) displayed. Press AUDIO again to select
another audio language. The audio display will disappear automati-
cally if the ‘AUDIO’ button is not pressed within for 3 seconds.
Audio Language Screen Display
* Some DVDs only allow access to this function through the DVD
menu.
5. ZOOM
During playback press ‘ZOOM’ to enlarge the picture by 2x, 3x or 4X
with the current zoom multiple.(1)Press “zoom”one time ,the picture
will be enlarged 2X.(2)Press “zoom” a second time ,the picture will be
enlarged 3X.(3)Press “zoom” a 3rd time ,the picture will be enlarged
4X.(4)Press “zoom” a 4th time ,the picture will return to normal size.
Zoom Screen Display
16
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
6. A-B REPEAT
a. During playback press a first time ‘A-B’ to set the Starting Point A.
A-B Repeat Starting Point Screen Display
b. Press ‘A-B’ a second time to set the Ending Point B and the player
will repeatedly play the part between Point A and Point B.
A-B Repeat Ending Point Screen Display
c. Press A-B a third time to cancel A-B repeat and resume normal
playback.
A-B Repeat Cancelled Screen Display
17
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
7. Repeat
Single Elapsed
Single Remain
Total Elapsed
a. During playback press ‘REPEAT’constantly to see the repeat mode.
Chapter: Repeat the current chapter
Title: Repeat the current title
All: Repeat all chapters and titles
Off: Resume normal playback
The ‘Chapter’ repeat display shows below for example:
Chapter Repeat Screen Display
K. Variable Playing Mode
1. Playing Audio CDS
When playing an audio CD press the DISPLAY button constantly on
the remote to view time information. The options below appear on
screen display circularly to show you what information is available
using this function.
Display Off
CD Display Mode
Single Elapsed: The current track playing and playing time of that
track will display on the screen.
Single Remain: The current track playing and the amount of time
left.
Total Remain
18
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
Total Elapsed: The current track playing and the total time that the
CD has been playing.
Total Remain: The current track playing and the amount of time
remaining on the CD.
Display Off: The CD time Information will not be displayed.
Take ‘Single Elapsed’ display as a example:
Single Elapsed Screen Display
USING THE REPEAT FEATURE
The default mode for the Repeat feature is OFF. Pressing REPEAT
consecutively changes the repeat options:
• Track- repeats the track that is playing.
• All- repeats the disc that is playing.
• Off
As you toggle through the options, the repeat option changes. The
selected repeat option loops repeatedly until you turn it off.
19
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
2. Playing MP3 Discs
MP3 is a format for storing digital audio. An audio CD-quality song is
compressed into the MP3 format with very little loss of audio quality
while taking up much less disc space. CD-R /RW discs that have
been encoded in MP3 format are compatible with this system.
MP3 MENU Screen Displa y
When a MP3 disc is inserted into the unit, the menu screen appears
automatically. You can use the menu screen to select your desired
folders and songs or the system plays the songs in the order they
were burned onto the disc.
1. Press the or button to choose a folder from the folder list
on the left side of the screen.
2. Press ENTER to select the highlighted folder. The songs available under the folder will be listed.
3. Use or button to choose a song from the list. Press ENTER to select and begin playback of the highlighted song.
20
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
4. Use the ( NEXT ) button to move to the next song. Press the
(PREVIOUS) button to move to the beginning of the previous
song.
USING THE REPEAT FEATURE
The default mode for the Repeat feature is OFF(Folder). Pressing
REPEAT consecutively changes the repeat options:
• Single
• Repeat One (repeat playback of a song)
• Repeat Folder (repeat playback of a specific folder)
• Folder (normal playback)
As you toggle through the options, the repeat mode changes. The
selected repeat mode loops repeatedly until you turn it off.
NOTICE
“ ” icon in front of a file name indicates that this is a folder, not an
MP3 file.
“MP3” icon in front of a file name indicates that this is a MP3 file.
Note:
Due to the company’s policy of constant improvement and technical
refinement, the company reserves the right to change or alter software.
21
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
3. Playing JPG file
1) Load the JPG Disc into tray.
2) Select JPG file by pressing “UP/DOWN” or ENTER button through
menus or submenus. To go back previous menu page, use LEFT
button.
3) You can preview the JPG file which you selected by pressing “PLAY”
or “ENTER”.
4) Pressing the “LEFT“ Key will rotate the picture 90 degrees
counterclockwise. Pressing the “RIGHT“ Key will rotate the
picture clockwise.
5) When browsing the photos, you can reverse the photo vertically by
pressing “UP” key,or you can reverse the photos horizontally by
pressing “DOWN” key.
6) When you browse the JPG file, press “DISPLAY”, there will be
different refresh mode below:
WIPE TOP, WIPE BOTTOM, WIPE LEFT, WIPE RIGHT, DIAGONAL
WIPE LEFT TOP, DIAGONAL WIPE RIGHT TOP, DIAGONAL WIPE
LEFT BOTTOM, DIAGONAL WIPE RIGHT BOTTOM,EXTEND FROM
CENTER H, EXTEND FROM CENTER V, COMPRESS TO CENTER
H, COMPRESS TO CENTER V, WINDOW H, WINDOW V, WIPE
FROM EDGE TO CENTER
7) When previewing the file, pressing “ANGLE”, “SUBTITLE ”, “AUDIO”,
“NUMBER”, “AB”, a hand icon will appear on the display meaning
that these options are not available.
8) Press “STOP” to browse the JPG file, “SLIDE SHOW” “MENU” will
display on the screen.
9) When browsing the picture, press “STOP” and thumbnail size
picture will be displayed. You can select the picture you desire by
using the UP/DOWN/LEFT/RIGHT/ENTER key.
22
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
4.Playing MPEG4 Discs
MPEG4 is the brand name of the world's most popular video compression technology. It’s a piece of software that compresses video
from virtually any source down to a size that is transportable over
the Internet without reducing the original video's visual quality.
DVD, CD-R /RW discs that have been encoded in MPEG4 format
are compatible with this system.
Note: Only the files whose suffix is ‘avi’ can be displayed.
The operation of a MPEG4 Disc is the same as the MP3 discs. Using UP, DOWN, LEFT, RIGHT to move the cursor and press ENTER to confirm.
* Press MENU to return to the available menu.
23
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
L. Connecting to other Electronic Equipment
1. Connecting to a TV or another monitor
( Refer to Figure 9)
You can also connect the DVD player to a TV to enjoy high quality
stereo sound and picture on another monitor.
1). Connect one end of the audio/video cable’s black plug (optional,
1/8”stereo plug) into the unit’s DVD AUDIO OUT jack, and connect
the other end to the AUDIO INPUT jacks on your TV or Monitor
(white = left channel, red = right channel).
2). Connect the audio/video cable’s yellow plug (optional) into the DVD
VIDEO OUT jack on the right of the unit, and the other yellow plug to
the VIDEO INPUT jack on your TV or Monitor.
VOL
VOL
SD
DC 9V
SD
DC 9V
Figure 9
* Optional wired headphones may be used with the unit. Simply plug in
the headset to headphone jack.
2. SD Card
With no disc in the unit, insert a SD card with JPEG or MP3 files into
the appropriate input. Press the DVD/SD button to switch between
DVD and SD modes.
24
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
M. Specifications
Compatible DISC: DVD/CD/MP3/MPEG4
Signal system: PAL
Panel size: 7 inch
Frequency response: 20 Hz to 20 kHz
Video output: 1 Vp-p/75 Ohm, unbalanced
Audio output: 1.4Vrms/10kOhm
Audio S/N: Better than 60 dB
Dynamic range : Better than 85 dB
Laser: Semiconductor Laser, Wave Length: 650 nm/795 nm
Power source: DC 9V
Power consumption: 6 W
Operating temperature: 5~35°C
Weight : 0.37 kg
Dimensions (W x D x H): 7.24 X 6.14 X1.14inches
184x 156 x 29mm
Single Monitor
Colour System:
Screen Size:
Power Supply:
Power Consumption:
Operating Temperature:
Operating Humidity:
Storage Temperature:
Dimensions (W x D x H):
Weight:
PAL
7 Inches
DC 9-12V
7W
41~104º F (5~40ºC)
10-75%
4~140º F (-20~60ºC)
204 x 151 x 12 mm
0.327kg
25
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
N. Troubleshooting
PROBLEM
No sound or
distorted sound
Can’t advance
through a movie
The icon ( )
appears on
screen
Picture is
distorted
SOLUTION
• Make sure your DVD is connected properly.
Make sure all cables are securely inserted
into the appropriate jacks.
• You can’t advance through the opening
credits and warning information that appears
at the beginning of movies because the disc
is programmed to prohibit that action.
The feature or action cannot be
completed at this time because:
1. The disc’s software restricts it.
2. The disc’s software doesn’t support the
feature (e.g., angles)
3. The feature is not available at the
moment.
4. You’ve requested a title or chapter
number that is out of range.
• The disc might be damaged. Try another
disc.
• It is normal for some distortion to appear
during forward or reverse scan.
No forward or
reverse scan
• Some discs have sections that prohibit rapid
scanning or title and chapter skip.
• If you try to skip through the warning information and credits at the beginning of a
movie, you won’t be able to. This part of the
movie is often programmed to prohibit
skipping through it.
26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
Troubleshooting (Cont)
PROBLEM
IR sensor
inoperative
Disc won’t play
Play starts, but
then stops
immediately
SOLUTION
• Verify that the batteries in the remote are
fresh.
• Verify that the remote sensor eye is not
obstructed.
• Verify that the infrared transmitter is
affixed over the sensor eye of the component to be controlled.
• Insert a disc with the label side facing
up.
• Check the type of disc you put into disc
tray. This DVD only plays digital video
discs, audio CDs and MP3s.
• Both the unit and the disc are coded by
region. If the regional codes don’t
match, the disc can’t be played. This
DVD is Region Number 2.
• The disc is dirty. Clean it.
• Condensation has formed. Allow
player to dry out.
This symbol on the product or in the instructions means that your electrical and
electronic equipment should be disposed at the end of its life separately from
your household waste.There are separate collection systems for recycling in the
EU.
For more information, please contact the local authority or your retailer where you
purchased the product.
27
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
Loading...