Salora DVD324HBL Instruction Manual

Instruction Manual

DVD324HBL

DVD PLAYER

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightening flash with arrowhead symbol, within an equilateral triangle, is intended the alert the

user to the presence of uninsulated dangerous voltage within the products enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert user to the presence of

important operating and maintenance (servicing) instructions in the literature accompanying the

appliance.

Laser product symbol: located on the rear panel of the unit, indicate this player is a class

laser product, only use weak laser and no hazardous radiation outside of the unit.

1.Read through this instruction manual before installation and use.

2.Do not touch the power plug with wet hand.

3.Switch off the main power when the unit is not in use. (Disconnect the power plug from the power outlet

when you do not intend to use the unit for a prolonged period of time.) Before moving the unit, remove the disc

from the unit/ tray first.

4.Do not open the cover or touch any of the components exposed out of the unit, only for qualified technicians.

5.Do not expose the unit under direct sunlight or nearby objects that radiate heat to avoid damage the unit.

6.Do not place the unit in moist and humid conditions, which effect the pick-up of the unit lead to out of work.

7.Place the unit on a flat surface and ventilative condition. Please ensure the ventilation holes are not covered

to avoid overheating and malfunction.

8.Clear the panel and case with soft dry cloth only, do not apply any kind of thinner, alcohol

or sprays.

9. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as

vases, shall be placed on the apparatus

10. unplug the apparatus when not using for a long time oriented to disconnect from the Mains power

11. No naked flame sources, such as lighted candles, should not be placed on the apparatus.

12.Make sure there is free circulation of air (do not place the device on shelves, on a thick carpet, on a bed, or

anywhere that obstructs the ventilation slots, and leave at least 10cm clearance on all sides.

13.The apparatus shall not be exposed to dripping or splashing.

14.The mains plug is used as the disconnect device, the disconnect device shall remain readily operable.

GB-1

If the electric cable is damaged, it must be replaced by the manufacturer, or by the qualification persons, in

order to avoid a danger.

M

acrovision:

This product incorporates copyright protection technology that is protected by method claims of certain U.S

patents and other intellectual property rights owned by Macrovision Corporation, and is intended for home and

other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering

or disassembly is prohibited.

DOLBY:

Manufactured under license from Dolby Laboratories.

"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

GB-2

Contents

1. Precautions-----------------------------------------------------------------------------------------4

2. Front Panel and Rear Panel Illustration ------------------------------------------------------------5

3. Remote Control------------------------------------------------------------------------6

4. Connections------------------------------------------------------------------------------------7

5. Function Operation-------------------------------------------------------------------------------------8

6. Playing WMA,MP3 and JPEG discs---------------------------------------------------------------11

7. CD Ripping----------------------------------------------------------------------------------------------12

8. System Setup--------------------------------------------------------------------------------------------14

9. Specification -----------------------------------------------------------------------------------------18

10. Troubleshooting --------------------------------------------------------------------------------19

11 . Recycling---------------------------------------------------------------------------------19

GB-3

1. PRECAUTIONS

Before using this unit, be sure to read the applicable items of the operating instructions and
these safety suggestions carefully.
Afterwards keep them handy for future reference.
Take special care to follow the warnings indicated on the unit itself as well as in the
operating instructions.

Safety

Power Source-The unit should be connected to power supply only of the type described in
the operating instructions or as marked on the unit.

The product's function maybe reset when it is subjected to electrostatic discharge
disturbance. Just follow the instruction described in this manual to set the function again for
normal operation

Environment

1. Water and moisture do not use this unit near water.
For example, near a bathtub, wash bowl, swimming pool, or the like, Damp basements
should also be avoided.

2. Condensation-moisture may form on the lens in the following conditions.
Immediately after a heater has been turned on.
In a steamy or very humid room.
When the unit is suddenly moved from a cold environment to a warm one, if moisture
forms inside this unit, it may not operate properly, to correct this problem wait about one
hour for the moisture to evaporate.

3. Heat never use or place this unit near a heat source.

Do not leave it in an automobile exposed to direct sun light for a long time with the doors
and windows closed as this may deform the cabinet.

GB-4

2. FRONT PANEL AND REAR PANEL ILLUSTRATION

Front panel

① Standby ② Disc Tray ③ Open/Close ④Display Screen ⑤Remote Sensor
⑥Play ⑦ Pause ⑧STOP ⑨Card Reader ⑩USB Port

Rear panel

① Main Power ② Downmix Left ③ Downmix Right ④ HDMI Output

⑤ Coaxial Output ⑥ Component Video Output ⑦ Composite Video Output

⑧ S-video Output ⑨ 5.1 Channel Audio Output ⑩ Scart Output

GB-5

3. REMOTE CONTROL

1. STANDBY

2. USB/CARD

3.AUDIO

4. Numeric button

5.CLEAR

6. SETUP

7. UP button

8. LEFT button

9. DOWN button

10.REV

11. FWD

12.STEP

13.STOP

14.VOLUME +/-

15.L/R

16.N/P

17.SLOW

18.V-MODE

19. HD/Res. (HD-Mode)

20.PROGRAM

21. OPEN/CLOSE

22.SEARCH

23.SUB/MP3

24. MENU

25. TITLE

26.DISPLAY

27.RIGHT button

28. ENTER button

29.NEXT

30.PREV

31.PLAY/PAUSE

32.A-B

33.REPEAT

34.MUTE

35.ANGLE

36.PBC

37.RETURN

38.ZOOM

Using the Remote Control

Unless stated other wise, the remote control can operate all the features of the DVD Player, Always point the
remote control directly at the remote sensor on the front of the DVD Player, not the TV.

Battery Installation

Remove the battery compartment lid on the rear of the remote control by sliding the lid down, then off.
Place two AAA batteries inside the battery compartment with their + and ends aligned as indicated.
Do not mix old and new batteries or different types of batteries

GB-6

Replace the battery compartment lid. Slide the lid until you hear it click into place.

Important:

When replacing batteries, please take care to waste them in accordance with current regulation. For this
matter please put them in the right assigned place, in order to ensure they are surely recycled while respecting
environment. Do not burn them or burry them.

4.CONNECTIONS

● Turn off the power before connection.

● Turn on the power after finishing connection.

Wires must be firmly connected; especially the plug shall be fully inserted.

DVD+TV
Notes :

There are the following ways of connecting the player AV output to the TV set:

z S-video cable and left/right audio cable (set the video type to component)

z Composite video cable and left/right audio cable

z Component video cable and left/right audio cable (set the video type to component, if

you connecting a progressive scan TV set, please set the video type to P-Scan)

z Scart cable (press V-MODE button to switch the video mode to RGB and set the video

type to RGB)

z HDMI cable(press V-MODE button to switch the video mode to HD and set the video

type to HD)

DVD+ AV Amplifier:

Notes :

There are the following ways of connecting the player with amplifier:

z left/right audio output
z 5.1 channel audio output
z coaxial audio output

Warning:

Do not connect any amplifier with coaxial connector that does not contain Dolby digital AC 3
or DTS decoder. Any attempt to do so and play of DVD disc will result in damaging your
speakers and causing possible hearing injury. Other than DVD disc, VCD and CD can be
operated normally without conforming to the above restriction.

Setting of TV system

If you find the image like non-fully zoomed picture, brim picture covered or black & white

picture etc, please select PAL or NTSC by systems setting or press N/P button to switch the

TV system on the remote control. This DVD disc is capable of supporting different scales
picture, as a result, non-full zoomed picture could appear or picture be partially covered on
user’s TV set.

GB-7

5. FUNCTION OPERATION

5.1 Function Buttons On the Front Panel

These button’s function is the same as the corresponding buttons on the remote control. For the detail

information, please see the following texts.

5.2 Function Buttons On the Remote Control

Menu Play (compatible with DVD, SVCD, VCD2.0 discs)

Press Menu Button to display the DVD Root Menu or SVCD or VCD 2.0 menu.
When menu display, you can press Arrow buttons to highlight the menu item you want to
choose.
Press Enter, you can begin to play with the highlighted item.

Title Play (compatible with DVD discs only)
During DVD playback, press Title button to display the DVD title content.

Sequence Play (compatible with DVD, SVCD, VCD, WMA, MP3/JPEG discs)

When a SVCD or VCD disc is loaded and MENU is on, once MENU button pressed, MENU
switches off. Then the player can play in sequence playback mode; when MENU button
pressed twice, MENU switches on.
Except for SVCD or VCD discs, in the stop state, when press Playpause button, the player
then enters sequence playback mode. This feature is effective to all the compatible discs.

Program Play (compatible with DVD, SVCD, VCD, CD, WMA, MP3/JPEG discs)

The Program Playback option allows you to enter the order in which you want chapters or
tracks to play, maximum to 16.
Program Menu:

Press PROGRAM button to enter program playing state.
Using ARROW key to highlight the item.
Using numeric key to enter chapter/track.
Using Play/Pause to start play.

Notes:To clear the programmed order, use Arrow buttons to highlight the “CLEAR” item,

GB-8

then press Enter.
To modify the programmed order, use Arrow buttons to highlight the modifying item and
enter the new chapter / track you want to program directly.

Advanced operation(some function are invalid for some discs)

Selecting Tracks (compatible with DVD, SVCD, VCD, CD, WMA, MP3/JPEG discs)

Press Numeric buttons to select desired title/ tracks.

Notes: To select tracks from 1 to 9, press corresponding Numeric buttons (1-9, 10).
When selecting track of 10 above, CONTINUOUS Press Numeric buttons(0-9).

Skipping Tracks (compatible with DVD, SVCD, VCD, CD, WMA, MP3/JPEG discs)

To skip forward to the beginning of the next title / chapter / track on a disc, press Next

To skip backward to the beginning of the preceding title / chapter / track on a disc, press

Prev.
Multispeed Fast Motion Playback (compatible with DVD, SVCD, VCD, CD, WMA,

MP3/JPEG discs)

Press the F.F button to fast forward play.
Fast Forward Playback has four speeds: × 2, × 4, × 8, × 20.
Press the F.R button to fast reverse play. Fast Reverse Playback has four speeds: × 2, ×
4, × 8, × 20.

Note :Press Playpause button to resume normal playback.
Multispeed Slow Motion Playback (compatible with DVD, SVCD, VCD, CD, WMA,
MP3/JPEG discs)

Press Slow button to enter Slow Motion Playback mode.
Slow Motion Playback has six speeds: 1/2, 1/3, 1/4, 1/5, 1/6, 1/7.
Press Playpause button to resume normal playback.

Freeze Frame and Frame Advance (compatible with DVD, SVCD, VCD, CD,HD-CD,
WMA, MP3/JPEG discs)

During CD, HD-CD, WMA or MP3 / JPEG playback, press Playpause once to freeze
playback; Press the Playpause button again or Playpause button to resume normal
playback.
During DVD, SVCD or VCD playback, press Playpause once to freeze playback; Press of
the Playpause button again to advance the picture one frame at a time; Press Playpause to
resume normal playback.

Using the Repeat Feature (compatible with DVD, SVCD, VCD, CD, WMA, MP3/JPEG
discs)

While a disc is playing, press Repeat button to switch repeat mode.

DVD playback: Off, Chapter Repeat, and Title Repeat.

VCD playback: Off, chapter Repeat, and Disc Repeat.

Using the Display Feature

(compatible with DVD, SVCD, VCD, CD, WMA, MP3/JPEG discs)

Press Display to show playing information.

Changing the Audio Language (compatible with DVD, SVCD discs)

Press Language to change the audio language.

Subtitles (compatible with DVD, SVCD discs)

GB-9

Press the Subtitle button to switch subtitle language or subtitle off.

Changing the Camera Angle (compatible with DVD discs)

Press Angle to switch camera angle.

Changing the TV System (compatible with DVD, SVCD, VCD, CD, WMA, MP3/JPEG
discs)

Press N/P button to change TV system: NTSC, PAL, and AUTO.

Zoom In the Video Image (compatible with DVD, SVCD, VCD, JPEG discs)

The Zoom Function allows you to enlarge or zoom out the video image .zoom factor: Zoom
2, Zoom 3, Zoom 4, Zoom 1/2, Zoom 1/3, Zoom 1/4, Zoom Off.

Use the Arrow buttons to pan across the screen when the zoom factor is 1, 2 or 3.

Repeat a Specific Segment on the Disc that You Define (compatible with DVD, SVCD,
VCD, CD, WMA, MP3 discs)

During the normal or fast motion playback, press the A-B button once, and “REPEAT A-” will
appear on the screen. This indicates the start of the loop to be repeated.
During the normal of fast motion playback, press A-B again, and “REPEAT A-B” will appear
on the screen. It indicates the end of the loop.

Volume control (compatible with DVD, SVCD, VCD, CD, WMA, MP3/JPEG discs)

You can press the Volume button on the remote controller or the TV set or the amplifier to
control the sound level.
Note: During DVD PCM output playback, this feature does not work.

USBCARD

(Disc/USB playback selection )

Press USB/CARD button, to switch among Disc/USB/CARD playback, please see the
following interface:

If you want to select disc playing, move the cursor to the DISC and press Enter button,
DISC MODE will be display on the top left corner on your TV.
If you want to select USB playing, move the cursor to the USB and press Enter button, USB
MODE will be display on the top left corner on your TV.

If you want to select CARD playing, move the cursor to the CARD and press Enter button,
CARD MODE will be display on the top left corner on your TV.

HD/Res.(HD-Mode)

Press the button to switch HD video output resolution

Note:
Under HD mode, this button is used to select the output resolution.
Your DVD player can generate some resolutions that may not be supported by your TV set.
If this happen ,your TV screen will probably turn black. To solve the problem, please
repeatedly press “HD/Res.” button until you select a resolution that can be well supported

GB-10

by your TV set.

Mute the Audio Output (compatible with DVD, SVCD, VCD, CD, WMA, MP3/JPEG discs)
Pressing the Mute button allows you to reduce sound to an inaudible level. Press the button
again to normal condition.

6. Playing WMA, MP3 and JPEG discs

Place a MP3 / JPEG disc into the tray, and the player will auto search the directories saved MP3 / JPEG files.
After searching, it will auto go to the first directory saved MP3 files (to the disc containing both mp3 and jpeg
files; To the disc containing single type of files, it will auto go to the first directory) and play the first song in the
directory (“01:” is highlighted).The screen displays as the picture below:
Use the Arrow buttons to enter the Directory Region and highlight the desired directory, then the first track
under it starts playback; Also you can use the Arrow buttons to enter the File Region and select the file you
want to play.

I. Press the Left and Right arrow buttons, you can activate Directory Region, File Region and File

Switch Region separately.

II. The highlight in Directory Region and File Region is shown as the picture above; While it appears a

transparent rectangle in File Switch Region.

III. In File Switch Region, you can press the Left and Right arrow buttons to switch the highlight, then

press PLAY; the “M”, “P”, and “V” button is illustrated in the above picture. For example, if a d is c w ith
MP3 and JPEG files but without any NES files i s loade d, the c olor of the lett er “M” and “P” will appear
to white and “V” black. If a MP3 file playing, “M” turns darker.

IV. T o th e disc w ith WMA , MP3 and JP EG files, w hen pla ying a JP EG pi cture, pr ess the R eturn button t o

return to JPEG list.

V. When a picture playing or pausing, press the Arrow buttons to change the display angle:

Up: flip vertical
Down: flip horizontal
Left: rotate 90O counter-clockwise
Right: rotate 90O clockwise

VI. When a picture stop, press the Menu button, the screen displays small pictures. Up to 6 small

pictures are displayed per screen. To view the next 6 pictures, press the Next button or the RIHGT
button to go forward and the Prev button or the LEFT button to go to the previous page.

VII. You can press the Numeric buttons to select the file you want to play. For example, if you desire the

15th track in current list, press the “10+” button once, then press “5”, the 15th starts playback.

Notes: When playing a disc with MP3 files, video cann ot be output while only digital audio can.

VIII. When playing JPEG pictures, press the Program button to choose the pictures switched mode.

GB-11

There are 17 switch modes; Press Program repeatedly to activate the function and choose the required
switch mode: Spread from Up to Down, Spr ead from Down to L ef t, Spr ead from Left to Right, Spread from
Right to Left, Spread from Left Up to Right Down, Spread from Right Up to Left Down, Spread Left Down
to Right Up, Spread from Right Down to Left Up, Spread from Center to Up / Down, Fold from Up / Down
to Center, Fold from Left / Right to Center, Horizontal Shutter, Vertical Shutter, Fold from the Corners to
the Center, Random Play, Off.

7. CD-RIPPING

Press the SUB/MP3 button on the remote control, the following interface will be display.
Use the direction button(UP,DOWN,LEFT,RIGHT), you can select your desired options
displayed in the interface

Press the ENTER button repeatedly, you can select different speed, different bitrate, and
create or cancel ID3 tag , create or cancel palylist.

Use the DOWN direction button ,you can select TRACKS option, the following interface will
be displayed.

On the top of the picture, press the ENTER button repeatedly, you can select all the tracks,
and press again, you can unselect all the tracks.
Use the DOWN and UP direction button, and press ENTER button, you can select or
unselect your desired tracks.
Use the DOWN direction button ,you can select START option, the following interface will be
displayed.

GB-12

Press the ENTER button, the CD-RIPPING will begin. In the CD-RIPPING progress, you
can change the speed by pressing ENTER button and also you can cancel the current
operation.

Use the DOWN direction button ,you can select QUIT option, the following interface will be
displayed.

Press ENTER button, you can exit the CD-RIPPING interface.

GB-13

8. System Setup

General Steps of Setup Menu

Press the Setup button, the main setup menu appears.
When the main menu displayed, the DVD system will auto pause.
Press the Left and Right arrow buttons to highlight the icon of the desired page, then press
the Down or Right arrow button to activate that page;
Press the SETUP button again, you can exit Setup Menu.

Notes: When setup, the pressing of the following buttons will turn off the setup menu, while
the choices that have been changed will be saved: N / P, Subtitle, F.F, F.R, MENU, Play,
Stop, Pause / Step, Next, Prev, Zoom, PREV, Repeat, Angle, language, Display, Setup.

8.1 SYSTEM SETUP

The system setup options are illustrated below:

8.1.1 TV SYSTEM

According to the Color System of the TV, you can choose the TV System.
AUTO: Choose this settings if your DVD player is connected to a multi-system TV.
NTSC: Choose this settings if your DVD player is connected to a NTSC TV.
PAL: Choose this settings if your DVD player is connected to a PAL TV.

8.1.2 SCREEN SAVER

If the screen saver is on, when your DVD player is in Stop, Open, or No Disc state, or there
is a frame frozen for more than 3 minutes, the screen saver will be displayed. This feature
can protect the screen from damage.
ON: Choose this setting to activate the screen saver.
OFF: Choose this setting to cancel the screen saver

8.1.3 HD OUTPUT

In this option, you can select different resolution. Under this condition, the VIDEO and TV
TYPE are both invalid. The default set is HD OFF.

When you change to the HDMI output with different resolution from the normal video output,

a interface will be displayed. Select “yes” to confirm change, select “no” to exit.

8.1.4 VIDEO

TV-RGB: Choose this setting if your DVD player is connected to a TV with an RGB cable.
VIDEO: Choose this setting if your DVD player is connected to TV with Video cable.

Notes:
When your DVD player output composite video, you can choose the setting randomly.
Choose TV-RGB if your DVD player is connected to a RGB TV.

8.1.5 TV TYPE

16 : 9 (Wide Screen): Choose this setting if your DVD player is connected to a wide screen
TV. If you choose this setting and you don’t have a wide screen TV, the images on the

GB-14

screen may appear distorted due to vertical compression.
4 : 3 LB (Letter Box): Choosing this setting if your DVD player is connected to a normal ratio
TV. connector You’ll see the movies in their original aspect ratio (height-to-width ratio). You’ll
see the entire frame of the movie, but it will take up a smaller portion of the screen vertically.
The movie might appear with black bars at the top and bottom of the screen.
4 : 3 PS (Pan & Scan): Choosing this setting if your DVD player is connected to a normal
ratio TV. You can fill the movie to the entire screen of your TV. This might mean that parts of
the picture (the left and right edges) won’t be seen.

Notes:The image display ratio is related to the recorded disc format. Some disc can not
display images in the aspect ratio you choose.
If you play a disc recorded in 4:3 format on a wide screen TV, black bars will appear on the
left and right side of the screen.

You must adjust the screen setting depending on the type of the television you have.

8.1.6 PASSWORD

The password option is initialized locked, and you cannot set the ratings limit or change the
password. In order for the Ratings feature work, the password mode must be turned on. If
you want to set the ratings limit, you will need to enter the default password, which is
0000(press the ANGLE button four times), then press Enter button to confirm.

8.1.7 RATING

The Rating feature is a rating limit system, like movie ratings. It works with DVD discs that
have been assigned a rating. This helps you control the types of DVDs that your family
watches.
There are these rating options: 1 KID SAFE,2 G,3 PG,4 PG13,5 PG-R,6 R,7 NC-17,8
ADULT.

Notes:If the password option is locked, you cannot set the ratings limit; the rating limit doe
not work when the password option unlocked.

8.1.8 DEFAULT

Choose this option to resume all the setup options to default settings.

8.2 LANGUAGE SETUP

The language setup options are illustrated below:

8.2.1 Highlight the OSD LANGUAGE option, and press the Arrow buttons to choose the

OSD language you prefer. Press ENTER button to confirm, and it will display OSD in that
language.

8.2.2 Highlight the AUDIO LANG option, and press the Arrow buttons to choose the audio

language you prefer. Press ENTER button to confirm. If the disc you are playing has that
language available, it will output audio in that language.

8.2.3 Highlight the SUBTITLE LANG option, and press the Arrow buttons to choose the

subtitle language you prefer. Press ENTER button to confirm. If the disc you are playing has
that language available, it will displays subtitles in that language.

8.2.4 Highlight the MENU LANG option, and press the Arrow buttons to choose the menu

language you prefer. Press ENTER button to confirm. If the disc you are playing has that
language available, it will displays menu in that language

Notes:If your preferred language isn’t available, the disc’s default language will be played.

GB-15

8.2.5 Highlight the MPEG4 SUBTITLE option, and press the Arrow buttons to choose the

Subtitle you prefer. Press ENTER button to confirm.

Notes:If your preferred language isn’t available, the disc’s default language will be played.

8.3 AUDIO SETUP

The audio setup options are illustrated below:

8.3.1 Highlight the AUDIO OUT option, and press the Arrow buttons to choose the audio

output mode you prefer. Press ENTER button to confirm; There are 3 optional audio output
modes: SPDIF/OFF, SPDIF / RAW, and SPDIF/ PCM.
SPDIF/OFF : From the Coaxial Output, no signal is output. If you select this option, the

HDMI has not audio output.

SPDIF/ RAW: Choose this setting if your DVD player is connected to a power amplifier with
a coaxial cable or an optical cable; When playing a disc recorded with Dolby Digital, DTS
and MPEG audio formats, the corresponding digital signals will be output from the Coaxial
Output jack or Optical Output jack. This player’s digital output jacks are designed for a
connection to a Dolby Digital, DTS , or MPEG receiver or decoder.
SPDIF / PCM: Choose this setting if your DVD player is connected to a 2-channel digital
stereo amplifier; When playing a disc recorded with Dolby Digital and MPEG audio formats,
audio signals will be modulated into a 2-channel PCM signal, and it will be output from the
Coaxial Output jack or Optical Output jack. (The default set is SPDIF/PCM for the HDMI

audio output )

8.3.2 KEY

Use the Up and Down arrow button to move the scroll and adjust the key.

8.3.3 GM5

1) GM5 audio effect function could process 2CH audio source into 5CH sound. The
different modes are achieved by different DSP operating method, and the effects
will be different, too.

2) GM5 can support CDDA/MP3/VCD/AC3 2CH audio source.

a. There are extended items of GM5 function: SONG/CINEMA/OFF
b. GM5 will be unable when it is set to OFF.

c. When it is set to SONG or CINEMA, the corresponding audio effect will be

achieved by GM5 function.

8.4 VIDEO SETUP

The video setup options are illustrated below:

8.4.1 BRIGHTNESS

Use the Up and Down arrow button to move the scroll and adjust the brightness.

8.4.2 CONTRAST

Use the Up and Down arrow button to move the scroll and adjust the contrast.

8.4.3 HUE

Use the Up and Down arrow button to move the scroll and adjust the hue.

8.4.4 SATURATION

Use the Up and Down arrow button to move the scroll and adjust the saturation.

8.4.5 SHARPNESS

Use the Up and Down arrow button to move the scroll and adjust the sharpness.

GB-16

8.5 SPEAKER SETUP

The speaker setup options are illustrated below:

8.5.1 DOWNMIX

Use the Up and Down arrow button to move the scroll and adjust the saturation.
LT / RT: Choose this setting, it will be sound like in a movie theatre if the original movie the
disc was recorded from was encoded in the Pro Logic Dolby Digital format.
STEREO: when 2-channel sound playing, stereo signal will be output.
VSS: Choose this setting, when a disc recorded with 5.1-channel sound format playing, the
fictitious surround soundtracks effect will be heard from the main soundtrack.

5.1CH:Choose this setting to output the 5.1-channel sound.

8.5.2 SUBWOOFER

There are two settings in this option: OFF / ON. When ON is chosen, the player will auto
detect the subwoofer input then output it. When OFF is chosen and the subwoofer input will
not be output

8.5.3 CENTER DELAY

You can adjust center delay in this option

8.5.4 REAR DELAY

You can adjust rear delay in this option.

8.5.5 FRONT

Settings of the front audio channels.

8.5.6 CENTER
Settings of the center audio channel.

8.5.7 REAR

Settings of the rear audio channels.

8.6 DIGITAL SETUP

The video setup options are illustrated below:

8.6.1 OP MODE

LINE OUT: Choose this setting to line out the input signal. It will be more suitable for playing
in the night time, for the output volume is low.
RF REMOD: It will be more suitable to choose this setting for playing in the day time, for the
output volume is high.

8.6.2 DYNAMIC RANGE: When “LINE OUT” is selected, choose this setting to adjust the

line out ratio and get different effect. If adjusting to FULL, the audio signal peak value will be
the minimum; while adjusting to OFF, maximum.

NOTE: This option will be validated when the DOWNMIX OFF.

8.6.3 DUAL MONO (LEFT + RIGHT)

Choose this option to setup the L and R mono output mode; There are four modes in this
option: STEREO, MONO L, MONO R, and MIX MONO.

GB-17

9. Specification

Signal system PAL/AUTO/NTSC
Frequency Response 20HZ-20KHZ( at 1KHz 0 dB)
Signal-to-Noisy Ratio ≥90 dB( at 1KHz 0 dB)
Audio Distortion+Noise ≤-60dB ( at 1KHz0dB)
Audio Output(Analog audio) 2.0
Video Output Composite:1.0±0.2Vp-p

MAX Resolution >500 lines
Power Supply ~110-240V AC 50/60Hz
Dimensions 430(mm)X260(mm)X38(mm)
Supported Disc MPEG-4/Xvid/DVD/SVCD/VCD/CD/MP3/Kodak

USB 2.0

REFERENCE:

To protect your DVD player, the interval between two consecutive Power button operations
must be above 30 seconds.
No using for a period of time, please pull out the plug from the electronic outlet.
The player should be operated only on condi t ion that the type of p ower su pply c orresponds
to the marking label. Otherwise, it doesn’t work or even be damaged.
The player may not be compatible with some encrypted discs.
If the player stops playback by accident, please power it on again.

+0

Vrms

-1..0

Load impedance: 75Ω, imbalance, negative polarity

Picture/Photo CD

GB-18