Salora CDC100 Quick Start Manual

SALORA

CDC100

1. Power button (4)
Turn on or turn the camera, press this button to turn on the camera and enter in Standby.
Hold the button, the recording and or settings will be saved before the camera will turn off
again.

2. OK button (7)

 Video mode: Start and stop recording.
 Photo mode: Take a photo.
 Playback mode: Start or stop the playback of a file.
 Menu: Confirm operation and setting in Video menu, Setting menu, Photo menu and

Playback menu.

3. Menu button (6)

 Enter the Video menu, press again to enter the setting of the Video menu. If you

press the Menu button again you will exit the Menu.

 Playback mode: Enter the file menu, you can select to delete or save the file. Press

again to enter the setting menu.

4. Mode button (10)

 You can enter the Video, Photo or Playback mode.
 During recording, you can lock the recording with this button.

5. Up button (9)

 Menu: Go up to select the previous option.
 Playback mode: Go up to select a file.

6. Down button (8)

 Menu: Go up to select the next option.
 Playback mode: Go down to select a file.

7. Parking monitoring button (11)

Resolution

1080FHD 1920x 1080, 1080P 1440x1080, 720P 1280x720, WVGA 848x480,
VGA 640x480

Loop recording

Off, 1min, 2min, 3min, 5min, 10min.

Exposure

+2/3, +1/3, +0.0, -1/3, -2/3, -1.0, -4/3, -5/3, -2.0

Motion detection

Off/On

Recording audio

Off/On

Date stamp

Off/On

G-sensor

Of, 2G, 4G, 8G

LDW

On/Off, Car type, Sensitivity, Area Choice, Start Speed, On/Off Sound

Resolution

12M 4032x3024, 10M3648x2736, 8M 3264x2448, 5M2592x1944,
3M2048x153 6, 2MHD 1920x1080

Sequence

Off, On

Quality

Fine, Normal, Economy

Sharpness

Soft, Normal, Strong

White Balance

Auto, Daylight, Cloudy, Tungsten, Fluorescent

ISO

Auto, 100, 200, 400

Exposure

+2/3, +1/3, +0.0, -1/3, -2/3, -1.0, -4/3, -5/3, -2.0

Before turning off the camera, press this button to enter into Parking Monitoring mode. The
“P” icon will appear in the middle of the screen. When the camera is turned off and this
function is activated, as soon as something hits the car, the camera will automatically turn on
and make a recording of about one minute. The recording will be a ut om a ti c a ll y s av e d .
If you would like to deactivate the function, press the “P” button again, the icon will
disappear.

8. Chargi ng the battery

 Connect the DVR to the computer with a USB cable.
 Conne ct the DVR to the car.

When the battery is being charged the battery icon will flash on the screen and the
indicator light will turn red. When fully charged, the icon will stop flashing and the
indicator will go out.

9. Install the memory (TF) card
Note: For this device you will need a memory card Class 7 or higher. To install the card:

 Slide the card into the card slot (5) until it clicks, make sure that the card is inserted

with the right way up.

 To take out the card, press gently onto the card, it will be ejected automatically.
 Make sure that the card is inserted in the right way, otherwise y o u co u l d d am a ge th e

card.

 I f t h e TF ca r d i s no t c o mp a ti b l e y ou c o ul d t ry a ga i n o r t ry a no ther card.
 Maximum support is 32GB

10. Setting Date and Time
You can set the date and time in the Setup menu. By using the Up and Down buttons you can
select the date you wish to set. When you have reached the right digit, press OK to confirm
and the cursor will switch automatically to the next field. You can set the time in the same
way.

Note: When the camera indicates that there is low power, it will automatically save the last recording
and turn off.

Recording mode:

Photo Mode: