Salora 19LED8005TD Instruction Manual

Contents

Safety Information ..................................................1

Getting Started .......................................................2

Notications&Features&Accessories ..................2

Features .................................................................2

Control Buttons on the TV ......................................2

Connect Power ...................................................... 3

Remote Control .....................................................4

Connections............................................................5

Media Browser Menu..............................................6

TV Menu Features and Functions .......................... 7

General TV Operation ............................................9

Electronic Programme Guide (EPG) ......................9

Troubleshooting&Tips ......................................... 10

PC Input Typical Display Modes .......................... 11

DVD Mode ............................................................12

DVD Control Panel Buttons .................................. 13

General Operation ................................................ 14

General Playback ................................................. 15

DVD Troubleshooting ...........................................15

Disc Types Compatible with This Unit ..................16

MOBIL TV INSTRUCTION MANUAL ...................17

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO

To operate your TV in extreme ambient conditions may cause the damage of the device.

Note : Follow the on screen instructions for operating the related features.

instructions fully before installing or operating

children) with reduced physical, sensory or mental

NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

If there is lightning or storms, or if the TV is not

going to be used for a while (e.g. if going away on holiday), disconnect the TV set from the mains. The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT - Please read these

WARNING: Never let people (including

English - 1 -

capabilities or lack of experience and / or knowledge use electrical devices unsupervised.

• For ventilation purposes, leave a free space of at least 10 cm all around the set.

• Do not block ventilation holes.

• Do not place the TV on sloping or unstable surfaces, the

TV may tip over.

• Use this device in moderate climates.

• Donotplacetheset,apieceoffurniture,etc.onthepowercordor pinchthecord.Handlethepowercordbytheplug.Donotunplug theappliancebypullingfromthepowercordandnevertouchthe powercordwithwet handsasthis couldcausea shortcircuitor electricshock.Nevermakeaknotinthe cordortie itwithother cords.Thepowercordshouldbeplacedinsuchawaythattheyare notlikelytobesteppedon.Adamagedpowercordcancausere orgiveyouanelectricshock.Whenitisdamagedandneedstobe replaced,itshouldbedonebyqualiedpersonnel.

• The power cord plug should be easily accessible. Do not place the TV, furniture, etc. on the power cord. A damaged

powercord/plugcancausereorgiveyouanelectricshock.

Handle the power cord by the plug, do not unplug the TV by pulling the power cord. Never touch the power cord/plug with wet hands as this could cause a short circuit or electric shock. Never make a knot in the power cord or tie it with other cords. When damaged it must be replaced, this should

onlybedonebyqualiedpersonnel.

• Do not use this TV in a humid or damp place. Do not expose the TV to liquids. If any liquid falls into the cabinet unplug

theTVandhaveitcheckedbyqualiedpersonnelbefore

operating it any further.

• Do not expose the TV to direct sunlight or other heat sources.

• The TV should not be placed near to open amesor sources ofintenseheatsuchasan

electric heater.

• Excessive sound pressure from earphones and headphones can cause hearing loss.

• Ensure thatnoopename sources, suchaslit

candles, are placed on top of the TV.

• To prevent injury, this TV must be securely attached to the wall in accordance with the installation instructions (if the option is available).

• Occasionally, a few non-active pixels may appear on the screenasaxedblue,greenorredpoint.Pleasenotethat

this does not affect the performance of your product. Take

carenot to scratch the screen with ngernails or other

hard objects.

• Before cleaning, unplug the TV from the wall socket. Only use a soft, dry cloth while cleaning.

Warning

Risk of electric shock

Caution

Important

Notice

Serious injury or death risk

Dangerous voltage risk

Injury or property damage risk

Correctly the system operate

Additional notes marked

Getting Started

Notications&Features&Accessories

Environmental Information

This television is designed to consume less energy to help save the environment. To reduce energy consumption, you should take the following steps:

If you set the Power Save Mode as Eco, the TV will switch to energy-saving mode. The Power Save Mode settings can be found In the ‘Picture’ section of the Main Menu. Note that some picture settings will be unavailable to be changed.

If Picture Off is selected, “Screen will be off in 3 seconds.” message will be displayed. Select PROCEED and press OK to continue. The screen

will be off immediately. When the TV is not in use, please switch off or

disconnect the TV from the mains plug. This will also reduce energy consumption.

StandbyNotications

1. If the TV does not receive any input signal (e.g.

from an aerial or HDMI source) for 5 minutes, the TV will go into standby. When you next switchon, the following message will be displayed: “Standby Cause No Signal” Press OK to continue.

2. If the TV has been left on and not been operated

for a while, the TV will go into standby. When you next switch-on, the following message will be displayed. “Standby Cause No Operation” Press OK to continue.

Features

•Remote controlled colour TV.

•Fully integrated digital (DVB-T).

•HDMI inputs are for connecting a device that has

a HDMI socket.

•USB input.

•OSD menu system.

•Scart socket for external devices (such as DVD

Players, PVR, video games, etc.)

•Stereo sound system.

•Teletext.

•Headphone connection.

•Automatic programming system.

•Manual tuning.

•Automatic power down after up to six hours.

•Sleep timer.

•Child lock.

•Automatic sound mute when no transmission.

•NTSC playback.

English - 2 -

•AVL (Automatic Volume Limiting).

•PLL (Frequency Search).

•PC input.

•Plug&Play for Windows 98, ME, 2000, XP,Vista,

Windows 7.

•Game Mode (Optional).

Accessories Included

•Remote Control

•Batteries: 2 x AAA

•Instruction Book

• 12VACAdaptor

Control Buttons on the TV

TVControlSwitch&Operation

1. Up direction

2. Down direction

3. Programme/Volume / AV / Standby-On selection

switch

The Control button allows you to control the Volume/ Programme/ Source and Standby-On functions of the TV.

To change volume: Increase the volume by pushing the button up. Decrease the volume by pushing the button down.

To change channel: Press the middle of the button, the channel information banner will appear on screen. Scroll through the stored channels by pushing the button up or down

To change source: Press the middle of the button twice, the source list will appear on screen.Scroll

through the available sources by pushing the button up or down.

To turn the TV off: Press the middle of the button down and hold it down for a few seconds, the TV will turn into standby mode.

Inserting the Batteries into the Remote

Lift the cover on the back of the remote upward gently. Install two AAA batteries. Make sure to match the + and - ends of the batteries in the battery compartment (observe the correct polarity) Replace the cover.

Connect Power

IMPORTANT:TheTVsetisdesigned tooperate on12V DC.Forthis,anadaptorisusedwhichgives12Vvoltage. Connectthisadaptortoasystemthatsupplies110-240V AC,50/60Hz

Antenna Connection

Connect the “aerial” plug to the AERIAL INPUT (ANT) socket located on the back of the TV.

Notication

Manufactured under license from Dolby Laboratories.

TRADEMARK ACKNOWLEDGMENT

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

“HDMI,theHDMIlogoandHigh-DenitionMultimedia

Interface are trademarks or registered trademarks of HDMI Licensing LLC.”

Information for Users on Disposal of Old Equipment and Batteries

[European Union only]

These symbols indicate that equipment with these symbols should not be disposed of as general household waste. If you want to dispose of the product

or battery, please consider the collection systems or facilities for appropriate recycling.

Notice: The sign Pb below the symbol for batteries indicates that this battery contains lead.

Battery

Products

Specication

TV Broadcasting PAL B/G D/K K

Receiving Channels

Number of Preset Channels

Channel Indicator On Screen Display RF Aerial Input 75 Ohm (unbalanced) Operating Voltage 110-240V AC, 50/60Hz.

Audio German+Nicam Stereo

Audio Output Power (WRMS.) (10% THD)

Power Consumption 35 W Weight 3,60 TV Dimensions

DxLxH (with foot) TV Dimensions

DxLxH (without foot)

Operation temperature and operation humidity:

VHF (BAND I/III)

- UHF (BAND U) HYPERBAND

1000

2 x 2,5

134 x 451 x 331

54 x 451 x 296

5ºCupto45ºC,85%

humidity max

English - 3 -

Getting Started

ZOOM

REPEAT

LANG.

1 2

5 6

EXIT

BACK

Q. MENU

.,/@

SOURCE

/2/

PRESETS

Remote Control

Teletext

Press button to enter. Press again to activate mix mode. Press once more to exit. Follow the instructions displayed on digital teletext screen.

Digital Teletext (for UK only)

Press button to view digital teletext information. Operate it with the coloured buttons, cursor buttons and the OK button. The operation method may differ depending on the contents of the digital teletext. Follow the instructions displayed on the digital teletext screen. When the button is pressed again, the TV returns to television broadcast.

1. Standby

2. My button 1

3. No Function

4. Changes equalizer modes

5. Picture mode selection

6. Numeric buttons

7. TV Button

8. Electronic programme guide

9. Menu

10. Navigationbuttons(Up/Down/Left/Right)(Right-TXTSubpage)

11. Back

12. Favourites

13. Volume Up / Down

14. Info

15. No Function

16. Play

17. Current language

18. Rapid reverse

19. Red button / IDTV Page up

20. Green button / IDTV Page down

21. My button 2

22. Source selection

23. Sleep timer

24. Media browser

25. Channel swap

26. Teletext

27. Q. Menu

28. OK/Select/Hold(inTXTmode)/ChannelList(DTVmode)

29. Exit/Return/Indexpage(inTXTmode)

30. Image size

31. Mute

32. Program Up / Down

33. Pause

34. Stop

35. Subtitles

36. Rapid advance

37. Blue button

38. Yellow button Using My button 1 (**)

PressMYBUTTON1forvesecondswhenonadesiredsource,

channel or link, until the “MY BUTTON IS SET” message is displayed

onthescreen.ThisconrmsthattheselectedMYBUTTONisnow

associated with the selected function.

Using My Button 2 (***)

PressMYBUTTON2forvesecondswhenonadesiredsource,

channel or link, until the “MY BUTTON IS SET” message is displayed

onthescreen.ThisconrmsthattheselectedMYBUTTONisnow

associated with the selected function.

English - 4 -

Getting Started

12V

DC IN

Connections

Connector Type Cables Device

SIDE AV

HEADPHONE

Scart

Connection

(back)

VGA

Connection

(back)

PC/YPbPr

Audio

Connection

(side)

HDMI

Connection

(back)

SPDIFF

Connection

(back)

Side AV

(Audio/Video)

Connection

(side)

Headphone Connection

(side)

Side Audio YPbPr or PC Connection Cable (Not supplied)

(Not supplied)

YPbPr Video

Connection

(back)

PC to YPbPr Connection Cable (Not supplied)

USB

Connection

(side)

Connection

(side)

CAM

module

DC12VInput

NOTE: When connecting a device via the Side AV input, you must use the supplied connection cables to enable connection. See the illustrations above. You can use YPbPr to VGA cable (not supplied) to enable YPbPr signal via VGA input.You cannot use VGA and YPbPr at the same time.To enable PC audio, you will need to use the SIDE AV CONNECTION cable’s WHITE & RED inputs. If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.When receiving DTV channels (Mpeg4 H.264) or while in Media Browser mode, output will not be available via the scart socket. When using the wall mounting kit (optional), we recommend that you plug all your cables into the back of the TV before mounting on the wall.Insert or remove the CI

module only when the TV is SWITCHED OFF. You should refer to the module instruction manual for details of the settings.

English - 5 -

Getting Started

First Time Installation - USB Connections

Switching On/Off

Connect the power cord to the 110-240V AC, 50/60Hz. To switch on the TV from standby mode either: Press the “ ” button, P+ / P- or a numeric button on

the remote control. Press the side function switch until the TV comes on

from standby

To Switch the TV Off

Press the “ “ button on the remote control or press the side function switch until the TV switches into standby mode.

To power down the TV completely, unplug the power cord from the mains socket.

Note: When the TV is switched to standby mode, the standby LED can blink to indicate that features such as Standby Search, Over Air Download or Timer is active. The LED can also blink when you switch on the TV from standby mode.

First Time Installation

When turned on for the first time, the language selection screen is displayed. Select the desired language and press OK.

The First Time Installation (FTI) screen will be displayed next. Set your preferences using the

navigationbuttonsandwhennished,pressOKto

continue. You can activate Store mode option to be available

in “Other settings” menu and your TV’s features will

beillustratedonthetopofthescreen.Aconrmation

screen will be displayed. Select YES to proceed. If Home Mode is selected, Store mode will not be

available after the First Time Installation. Press OK button to continue.

Default PIN code can change depending on the selected country.

If you are asked to enter a PIN code for viewing a menu option, use one of the following codes: 4725, 0000 or 1234.

Aerial Installation

If you select AERIAL option from the Search Type screen, the television will search for digital terrestrial TV broadcasts.

NOTE: You can press MENU button to cancel.

After all the available stations are stored, the Channel List will be displayed on the screen. If you like how the channels are sorted according to the LCN (*), please select “Yes” and than press OK.

Press MENU button to quit channel list and watch TV.

(*) LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable channel sequence (if available).

Media Playback via USB Input

You can connect a 2.5” and 3.5” inch (hdd with external power supply) external hard disk drives or USB memory stick to your TV by using the USB inputs of the TV.

IMPORTANT! Back up your files before making any connections to the TV. Manufacturer will not be

responsibleforanyledamageordataloss.Certain

types of USB devices (e.g. MP3 Players) or USB hard disk drives/memory sticks may not be compatible with this TV. The TV supports FAT32 and NTFS disk formatting.

While formatting a USB hard disk that has 1TB (Tera Byte) or more file capacity, you can experience problems with the formatting process. Do not repeatedly quickly plug and unplug the drive. This may cause physical damage to the USB player and USB device itself. Do not pull out USB module while

playingale.

Media Browser Menu

Youcanplayphoto,music,andmovielesstoredona

USB disk by connecting it to your TV. Connect a USB disk to one of the USB inputs located on the side of the TV. Pressing the MENU button while in the Media Browser mode will access the Picture, Sound and Settings menu options. Pressing the MENU button

again will exit from this screen. You can set your Media Browser preferences by using the Settings Menu.

Loop/Shufe Mode Operation

Start playback with and activate

Start playback with OK and activate

Start playback with OK/ and activate

TV plays next file and loop the list.

thesamelewillbeplayedina

loop (repeat).

thelewillbeplayedinashufe.

English - 6 -

TV Menu Features and Functions

Brightness

Dynamic Contrast

PC mode)

mode)

Picture Menu Contents

Mode

Contrast Sets contrast level of the screen.

Sharpness Sets the sharpness value for the objects displayed on the screen. Colour

You can change the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: Cinema, Game,Dynamic and Natural.

Sets the brightness value for the screen.

Sets the color saturation. To set the Power Save Mode as Eco, Picture Off and Disabled.

Power Save Mode

(When the Mode is Dynamic, Power Save mode is automatically set as disabled.)

This setting controls the backlight level. The backlight function

Backlight (Optional)

will be inactive if the Power Save Mode is set to Eco. The backlight cannot be activated in VGA, Media Browser mode or while the picture mode is set to Game.

Noise Reduction

Advanced Settings

Colour Temp Sets the color temperature.

Picture Zoom

Film Mode

Skin Tone Skin tone can be changed between -5 and 5. Colour Shift With this option you can adjust the color shift to green or to red. RGB Gain YoucancongurethecolourtemperaturevaluesusingtheRGBGainfeature. Reset Resets the picture settings to factory default settings.(Except Game Mode) Autoposition (in

If the broadcast signal is weak and the picture is noisy, use the Noise Reduction setting to reduce the amount of noise.

You can change the Dynamic Contrast ratio to desired value.

Sets the desired picture size from picture zoom menu.

Note: Auto (Only available in Scart mode with SCART PIN8 high voltage/low voltage switching)

Films are recorded at a different number of frames per second to normal television

programmes.Turnthisfeatureonwhenyouarewatchinglmstoseethefast

motion scenes clearly.

Automatically optimizes the display. Press OK to optimize.

H Position (in PC

V Position (in PC

Dot Clock (in PC mode)

Phase (in PC mode)

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings while in PC mode.

This item shifts the image horizontally to the right hand side or left hand side of the screen.

This item shifts the image vertically towards the top or bottom of the screen.

Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts.

Depending on the resolution and scan frequency that you input to the TV set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method.

English - 7 -

TV Menu Features and Functions

Other Settings: Displays other setting options of the TV set:

Sound Menu Contents Volume Adjusts the volume level.

Equalizer

Balance This setting is used for emphasizing left or right speaker balance. Headphone Sets headphone volume. Sound Mode You can select a sound mode. (If the selected channel supports). AVL (Automatic

Volume Limiting) Digital Out Sets digital out audio type. Settings Menu Contents Conditional Access Controls conditional access modules when available.

Language

Parental

Timers

Date/Time Sets date and time. Sources Enables or disables selected source options.

Selects the equalizer mode. Custom settings can be made only when in user mode.

Functionsetsthesoundtoobtainxedoutputlevelbetweenprogrammes.

Congureslanguagesettings(maychangedependingonthecountry

selected) Preferred and current settings will be available. Current settings can be changed only if the broadcaster supports.

Enter correct password to change parental settings. You can easily adjust menu lock, maturity lock (may change depending on the country selected) and child lock in this menu. You can also set new pin number.

Sets sleep timer to turn off the TV after a certain time. Sets timers for selected programmes.

Menu Timeout Changes timeout duration for menu screens. Scan Encrypted

Channels

Blue Background

Software Upgrade ToensurethatyourTValwayshasthemostuptodatermware. Application Version Displays application version. Hard of Hearing Enables any special feature sent from the broadcaster.

Audio Description

Auto TV Off

When this setting is on, the search process will locate the encrypted channels as well.

Activates or deactivates the blue background system when the signal is weak or absent.

Audio description refers to an additional narration track for blind and visually impaired viewers of visual media, including television and movies. You can use this feature, only if the broadcaster supports that additional narration track.

Note: Audio description sound feature cannot be available in recording or time shifting mode.

You can set the timeout value of auto off feature. When the timeout value is reached and the TV has not been operated for a selected time, the TV will go into standby mode.

English-8-

TV Menu Features and Functions

Manual Channel Scan

Standby Search (Optional)

broadcasts will be searched. If the TV locates any new or missing broadcasts, a menu screen will be displayed, asking you whether or not to execute these changes. Channel list will be updated and changed after this process.

If the Standby Search is set to On, when the TV is in standby mode, available

Store Mode

Power Up Mode

If you are displaying the TV in a store, you can activate this mode. Whilst Store Mode is enabled, some items in the TV menu may not be available.

Thissettingconguresthepowerupmodepreference.

Install and Retune Menu Contents

Automatic Channel Scan (Retune)

(If available)

Network Channel Scan

Analogue Fine Tune

First Time Installation

Displays automatic tuning options. Digital Aerial: Searches and stores aerial

DVBstations.Analogue:Searchesandstoresanaloguestations.DigitalAerial&

Analogue: Searches and stores aerial DVB and analogue stations.

This feature can be used for direct broadcast entry.

Searches for the linked channels in the broadcast system.

Youcanusethissettingfornetuninganaloguechannels.Thisfeatureisnot

available if no analogue channels are stored.

Deletes all stored channels and settings, resets TV to factory settings.

General TV Operation

Using the Channel List

The TV sorts all stored stations in the Channel List. You can edit this channel list, set favourites or set active stations to be listed by using the Channel List options.

ConguringParentalSettings

To prohibit viewing of certain programmes, channels and menus can be locked by using the parental control system.

To display parental lock menu options, the PIN number should be entered. The factory default PIN number is

0000. After coding the correct PIN number, parental settings menu will be displayed. Menu Lock (Optional): Menu lock setting enables or disables the menu access. Maturity Lock (Optional): When set, this option gets the maturity information from the broadcast and if this

maturity level is disabled, disables access to the broadcast. Child Lock (Optional): When Child Lock is set, the TV can only be controlled by the remote control. In this

case the control panel buttons will not work.

Set PIN:DenesanewPINnumber.

Default PIN code can change depending on the selected country.

If you are asked to enter a PIN code for viewing a menu option, use one of the following codes: 4725, 0000 or 1234.

Electronic Programme Guide (EPG)

Some, but not all channels send information about the current and next programmes. Press the GUIDE button to view the menu.

Red button (Prev Day): Displays the programmes of previous day. Green button (Next day): Displays the programmes of the next day. Yellow button (Zoom): Expands programme information. Blue button (Filter): Viewslteringoptions.

English - 9 -

: Press button to view Select Genre menu.

Using this feature, you can search the programme guide database in accordance with the genre. Info available in the programme guide will be searched and results matching your criteria will be listed.

: Displays, in detailed, information on the

programme selected. Numeric buttons (Jump): Jumps to the preferred

channel directly via numeric buttons.

OK: Displays programme options. Text (Search): Displays “Guide Search” menu.

(Now) : Shows the current programme.

Programme Options

In EPG menu, press the OK button to enter the Event Options menu.

Select Channel

In EPG menu, using this option, you can switch to the selected channel.

Software Upgrade

Your TV is capable of finding and updating automatically via the Aerial/Cable signal.

Software upgrade search via user interface

Simply navigate on your main menu. Choose Settings and select Other Settings menu. In Other Settings menu navigate on to the Software for Upgrade item and press OK button to check for a new software upgrade.

3 AM search and upgrade mode

While the TV is connected to an aerial signal. If Automatic scanning in the Upgrade Options menu is enabled, the TV wakes up at 03:00 and searches broadcast channels for new software upgrades. If new software is found and downloaded successfully, the next time the TV powers up , it will have the new software version.

Note: If the TV fails to come on after the upgrade unplug the TV for 2 minutes and plug in again.

Troubleshooting&Tips

Tv will not turn on

Make sure the power cord is plugged in securely to wall outlet. The batteries in the remote control may be exhausted. Press the Power button on the TV.

Poor picture

• Have you selected the correct TV system?

• Low signal level can cause picture distortion. Please

check antenna access.

• Check if you have entered the correct channel

frequency if you have done manual tuning.

• The picture quality may degrade when two devices

are connected to the TV at the same time. In such a case, disconnect one of the devices.

No picture

•No Picture means that your TV is not receiving a transmission. Have you selected the correct button on the remote control? Try once more. Also make sure the correct input source has been selected.

•Is the antenna connected properly?

•Is the antenna cable damaged?

•Are suitable plugs used to connect the antenna?

•If you are in doubt, consult your dealer.

No sound

•Has the TV been set to mute? To cancel mute, press the “ ” button, or increase the volume level.

•Sound is coming from only one speaker. Is the balance set to one extreme? See Sound Menu section.

Remote control - does not operate

•The batteries may be exhausted. Replace the batteries.

Input sources - can not be selected

•If you cannot select an input source, it is possible that no device is connected. if not

•Check the AV cables and connections if you have tried to connect a device.

•Quick Menu

•Quick Settings menu allows you to access some options quickly. This menu includes Power Save Mode, Picture Mode, Equalizer Settings, Favourites and Sleep Timer options. Press Q.MENU button on the remote control to view quick menu. See the following chapters for the details of the listed features.

English - 10 -

PC Input Typical Display Modes

Format

Remarks

Video

Audio

(Maximum resolution/Bit rate etc.)

MPEG1: 768x576 @30P

MPEG2:1920x1080 @ 30P

vob

MPEG2

mkv

H.264, MPEG4,VC-1

MPEG2, MPEG4, Xvid ,

H.264/VP6:1920x1080 @ 30P

Sorenson: 352x288 @30P

32Kbps ~ 320Kbps(Bit rate)

32K, 44.1k, 48k Hz,16K, 22.05K, 24K

rate)

max WxH = 17000x10000

4147200bytes

max WxH = 4000x4000

3840000bytes

max WxH = 5760x4096

Subtitle

.sub .srt--

The following table is an illustration of some of the typical video display modes. Your TV may not support all resolutions. Your TV supports up to 1920x1080.

Index Resolution Frequency

1 1024x768 60 Hz

2 1280x768 60 Hz

3 1360x768 60 Hz

4 800x600 56 Hz

5 800x600 60 Hz

6 1024x768 60 Hz

7 1024x768 66 Hz

8 1280x768 60 Hz

9 1360x768 60 Hz

10 1280x1024 60 Hz

11 1280x960 60 Hz

12 1280x1024 60 Hz

13 1400x1050 60 Hz

14 1600x1200 60 Hz

15 1920x1080 60 Hz

Supported File Formats for USB Mode

Media File Extension

AV and HDMI Signal Compatibility

Source Supported Signals Available

PAL 50/60 O

EXT (SCART)

NTSC 60 O RGB 50 O RGB 60 O

Side AV

PAL 50/60 O NTSC 60 O 480I,480P 60Hz O 576I, 576P 50Hz O

PC/ YPbPr

720P 50Hz,60Hz O

1080I 50Hz,60Hz O 1080P 50Hz,60Hz O 480I 60Hz O 480P 60Hz O

576I, 576P 50Hz O

HDMI1

720P 50Hz,60Hz O 1080I 50Hz,60Hz O

24Hz, 25Hz

1080P

30Hz, 50Hz,

60Hz

(X: Not Available, O: Available)

In some cases a signal on the TV may not be displayed properly. The problem may be an inconsistency with standards from the source equipment (DVD, Set-top box, etc. ). If you do experience such a problem please contact your dealer and also the manufacturer of the source equipment.

mpg, mpeg MPEG1, MPEG2

mp4 MPEG4, Xvid , H.264

Movie

avi

v H.264/VP6/Sorenson

3gp MPEG4 , H.264 1920x1080 @ 30P

Music .mp3 -

.jpg .jpeg Baseline JPEG -

Photo

. Progressive JPEG -

.bmp - -

MPEG 1 Layer

1 / 2 (MP3)

English - 11 -

1920x1080 @ 30P

Hz,8K, 11.025K, 12K Hz(Sampling

DVD Mode

Safety Information CAUTION

DVD Player is a class 1 laser product. However this product uses a visible laser beam which could cause hazardous radiation exposure. Be sure to operate the player correctly as instructed.

CLASS 1

LASER PRODUCT

RISK OF ELECTRIC SHOCK

Thelightning ash with arrowhead symbol, within

an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”

withintheproduct’senclosurethatmaybeofsufcient

magnitude to constitute a risk of electric shock of persons.

Notes on Discs

On handling discs

•To keep the disc clean, handle the disc by its edge. Do not touch the surface.

•Do not stick paper or tape on the disc.

•If the disc is contaminated with any substance like

glue remove before using it.

On cleaning

•Before playing, clean the disc with a cleaning cloth. Wipe the disc from the center out.

•Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs.

LicenceNotication

•This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering and disassembly are prohibited.

How to Watch a DVD

When placing a disc into the loader, labeled side of the disc should be on the front:

•Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature can rise quickly and damage the disc.

•After playing, store the disc in its case.

English - 12 -

WhenTVsetisturnedon,rstswitchtoDVDsource

by using the SOURCE button on the remote control. Press play on the remote control, or directly press play button at the front panel. If there is no disc inside the

loader,placeaDVDrstandpressplay.

Note: If you switch to another source by pressing SOURCE, SWAP or P+/P- buttons on the remote control, DVD playback will be paused automatically. You should press PLAY and resume the playback manually when you switch to DVD mode.

DVD Control Panel Buttons

A. Disc loader B. Play / Pause

Plays/pauses the disc. When DVD menu (root menu) is active, this button functions as “button select” (selects the highlighted item in menu) if this is not prohibited by the disc.

C. Stop / Eject

Stop playing disc / Eject or Load the disc Note:

•You cannot eject the disc via the remote control.

•Whileplayingale,youshouldpressSTOPbuttonthreetimestoeject.

Overview of the Remote Control

1. Standby

2. Display time / DVD Menu

3. No function (in DVD mode)

4. Numeric buttons

5. Menu

6. Navigation button

7. Back

8. Volume up / down

9. Info

10. No function

11. Play

12. No function

13. Rapid reverse

14. Zoom

15. Repeat

16. Search mode

17. Source selection

18. Sleep timer

19. Angle

20. OK

21. No function

22. Pause

23. Stop

24. Subtitle

25. Rapid advance

26. Title

27. Root

English - 13 -

General Operation

DVD Playback

Movie Playback

Other Functions – Button Combinations (During playback)

You can operate DVD, movie CD, music or picture CD’s content by using the proper buttons on your remote control. Below are main functions of commonly used remote control buttons.

Buttons on the Remote Control

MY BUTTON1

INFO

LANG.

OK / SELECT

GREEN

RETURN

YELLOW

MY BUTTON2

SUBTITLE

SWAP

BLUE

RED

Play Play Play Play

Pause Pause Pause Pause

Stop Stop Stop Stop

Skip backward/ forward

Highlights a menu item / Shifts the zoomed picture up or down (if available).

Fast reverse / Fast forward

Views the scene from different angles (if

Displays time / Views main setup menu

Time counter mode selection (during playback). Press repeatedly to switch between modes.

Audio language. X X

Displays TV menu.

Enter / View / Play

Displays repeat options.

Returns back to the previous menu (if available).

Goes back to the root folder (if available).

Direct selection of scenes or time.

Subtitle on-off. Press repeatedly to switch between subtitle options.

Media source selection.

Displays disc menu (if available).

Zooms picture. Press repeatedly to switch between zoom options.

Skip backward/ forward

available)

Displays disc menu (if available).

Picture Playback

Rotate Skip backward/forward

Changes slide effect

(depends on the

content)

Selects the

desiredle.

X X

Music Playback

Selects the

desiredle.

[ + ] +

Slow forward.

Sets slow forward speed.

Sets fast forward speed.

Sets fast reverse speed.

Conrms stop command.

(*) You can switch to title by pressing numeric keys directly. You need to press 0 and then digit key to switch one digit titles (example: to select 5, press 0 and 5).

English - 14 -

General Playback

Basic Play

1. Press on the power button

2. Please insert a disc to the loader.

The disc will be automatically loaded and play commences if the disc does not have any menus recorded on it.

A menu may appear on the TV screen after a few

momentsorthelmmaystartimmediatelyafterthe

introduction of the Film Company. This behaviour depends on the disc content and may change.

Note: Step 3 and 4 is available only when a menu is recorded on the disc.

3. Press “ ” / “ ” / / or the number button (s)

to select the preferred title.

4. Press OK. Play of the selected items now starts. The played

item may be a motion picture, a still picture or another submenu depending on the disc.

For your reference:

If an action corresponding to a button is prohibited the “ ” symbol appears.

Notes on Playback:

1. No sound will be heard during Rapid advance

or Rapid reverse.

2. No sound will be heard during Slow motion play.

3. Reverse slow motion play is not available.

4. In some cases, the subtitle language is not

changed immediately to the selected one.

5. When the preferred language is not selected even

after pressing the button several times, it means that the language is not available on the disc.

6. When the player is restarted or the disc is

changed, the subtitle selection is automatically changed back to the initial settings.

7. If a language is selected, not supported by the

disc, the subtitle language will automatically be set to the disc’s priority language.

8. Usually a circulation will happen while switching

to another language, that is you can cancel the subtitle by pressing this button a number of times until “Subtitle Off” appears on the screen.

9. When the power is turned on or the disc is

removed, the language heard is the one selected at the initial settings. If this language is not recorded on the disc, only the available language on the disc will be heard.

10. Some DVDs may not contain root and/or title

menus.

11. Reverse stepping is not available.

12. For your convenience:

If you attempt to enter a number greater than the total time of the current title, the time search box disappears

English - 15 -

and “ Input Invalid” message appears on up-left corner of screen.

13. Slide Show is disabled when the ZOOM mode

is on.

DVD Troubleshooting

The picture quality is poor (DVD)

•Make sure the DVD disc surface is not damaged. (Scratch,ngerprintetc.)

•Clean the DVD disc and try again.

See instructions described in “Notes on Discs” to clean your disc properly.

•Ensure that the DVD disc is in the drawer with the label uppermost.

•A damp DVD disc or condensation may effect the equipment. Wait for 1 to 2 hours in Stand-by to dry the equipment.

Disc does not play

• No disc in the machine. Place a disc into the loader.

•Disc incorrectly loaded.

Ensure that the DVD disc is in the drawer with the label uppermost.

•Wrong type of disc. The machine cannot play CD- ROMSetc.•TheregioncodeoftheDVDmustmatch

the player.

Wrong OSD language

•Select the language in the set-up menu.

•The language for the sound or subtitles on a DVD

cannot be changed.

•Multilingual sound and/or subtitles not recorded on the DVD.

•Try to change the sound or subtitles using DVD’s title menu. Some DVD’s do not allow the user to change these settings without using the disc’s menu

•These functions are not available on the DVD.

No picture

•Have you pressed the correct buttons on the remote control? Try once more.

No sound

•Check the volume is set to an audible level.

•Make sure you have not switched the sound off

accidentally.

Distorted sound

•Check that the appropriate listening mode setting is correct.

If nothing works

If you have tried the above solutions and none seem to work, try switching your TV-DVD off and on again. If this does not work, contact your supplier or TV-DVD repair technician. Never attempt to repair a defective TV-DVD yourself.

Disc Types Compatible with This Unit

(Logos)

MPEG Multichannel Decoding LPCM

24bit/48,44.1kHzdown-samplingDAC

Disc Types

DVD

AUDIO-CD

MP3-CD

PICTURE-CD

For proper operation, only 12 cm discs must be used.

Recording Types

Audio + Video

Audio 12 cm 74 min.

Audio (xxxx.mp3)

Video (still picture)

Disc Size

12 cm

Specications

DVD: SS/SL 4.7” (DVD-5)

Types of Discs Supported

Video Type

SS/DL 4.7” (DVD-9) DS/SL 4.7” (DVD-10)

DS/DL4.7”(DVD-18)

MPEG-2 Video Standard Decoding (MPEG-1 supported)

Full-ScreenVideoDisplayof720x576(PAL)&720x480(NTSC)pixels 50and60Hzframerefreshrates(PAL&NTSC) Digitalbit-streamprocessingrateupto108Mbits/sec

Line resolution more than 500 lines

Max. Playing Time

Singlesided; 240 min. Double-

sided;480min.

It depends on MP3 quality.

It depends on JPEG quality.

Characteristics

•DVD contains excellent sound and video due to Dolby Digital and MPEG-2 System.

•Various screen and audio functions can be easily selected through the on screen menu.

•An LP is recorded as an analog signal with more distortion. CD is recorded as a Digital Signal with better audio quality, Iess distortion and less deterioration of audio quality over time.

•MP3 is recorded as a Digital Signal with better audio quality, less distortion and less deterioration of audio quality over time.

•JPEG is recorded as a Digital Signal with better picture quality over time.

CD-DA CD-R CD-RW MP-3/JPEG

Audio Type

Audio Output

Analog Outputs:

English - 16 -

MOBILTVINSTRUCTIONMANUAL

V+

V-

SwitchingtheTVOnUsing12Volt

1. Connect the cigarette lighter plug cable to the cigarette lighter socket of your car or a cable with clips to the battery of car, making sure to observe the correct polarity.

2. Plug the other side of 12 volt cable to DC 12 socket at the back of the TV. Then the standby LED lights up.

3. Press the “ ” button, P+ / P- or a numeric button on the remote control or press the “ ” button, - or + button on the TV. The TV will then switch on.

4. Adjust for best picture through antenna position or set TV channels again if necessary.

SwitchingtheTVO

1. Press the “ ” button on the remote control or press the “ ” switch on the TV, so the TV will switch to standby mode.

2. Unplug cable connectors and power plugs.

ATTENTION:12VInput:

English - 17 -

Table des matières

Consignes de sécurité .......................................... 18

Mise en route ........................................................20

Notications & Caractéristiques & Accessoires ....20

Fonctions ..............................................................20

Boutons de commande du téléviseur ................... 20

Branchez le câble d'alimentation ......................... 21

Télécommande .................................................... 22

Connexions (Connections) ................................... 23

Menu Navigateur média .......................................25

Options et fonctions du menu TV .........................26

Fonctionnement général de la TV ........................29

Utilisation de la liste de chaînes ........................... 29

Mise à jour du logiciel ........................................... 29

Dépannage et astuces..........................................29

Compatibilité des signaux AV et HDMI ................31

Mode DVD ............................................................32

Remarques sur les disques .................................. 32

Boutons du panneau de contrôle du DVD ............ 33

Fonctionnement général ....................................... 34

Dépannage du DVD .............................................36

Spécications .......................................................37

Consignes de sécurité

AVERTISSEMENT

RISQUE D’ELECTROCUTION

NE PAS OUVRIR

ATTENTION: TPOUR EVITER TOUT RISQUE

Le fait de faire fonctionner votre téléviseur TV dans des conditions ambiantes extrêmes peut l’endommager.

Remarque: Veuillez suivre les instructions qui s’afchent à

l’écran en ce qui concerne l’activation des fonctionnalités connexes.

D’ELECTROCUTION, NE RETIREZ PAS LE COUVERCLE. (OU LE ARRIÈRE). L’ENTRETIEN DES PIÈCES INTERNES EST INTERDIT AUX UTILISATEURS. VEUILLEZ CONFIER L’ENTRETIEN A UN PERSONNEL QUALIFIE.

Si la tempête ou les éclairs surviennent ou si la TV ne sera pas utilisée pendant un bon bout de temps, (si par exemple vous partez en vacances)

veuillez débrancher l’appareil de l’alimentation

secteur. La prise d’alimentation est utilisée pour

débrancher le téléviseur de l’alimentation secteur

et doit donc rester facilement opérable.

Le point d’exclamation à l’intérieur d’un triangle

équilatéral a pour fonction d’alerter l’utilisateur de la présence d’instructions importantes pour le bon fonctionnement et l’entretien (maintenance) dans la documentation fournie avec l’appareil.

Veuillez lire complètement ces consignes avant d'installer ou d'utiliser.

AVERTISSEMENT: Ne jamais permettre aux personnes (y compris les enfants) souffrant de déficiences physiques, sensorielles ou mentales et / ou manquant de connaissances appropriées, d’utiliser un appareil électrique sans être encadrées par une autre personne responsable de leur sécurité!

• Alimentation

• Utilisez toujours l’adaptateur AC fourni.

• Utilisez seulement avec l’alimentation électrique spéciée

sur l’adaptateur AC.

• L’adaptateur de courant peut devenir chaud pendant le

fonctionnement normal. Ceci ne veut pas dire que l’appareil fonctionne mal.

Veuillez vous assurer que l’adaptateur n’est pas couvert pendant son fonctionnement. Laissez un espace de 15 cm (minimum) autour de l’adaptateur AC.

• Les informations de classement et les consignes de sécurité de l’adaptateur AC gurent sur l’adaptateur.

AVERTISSEMENT: Si vous n’utilisez pas l’appareil pendant

un certain temps, débranchez-le de la prise de courant.

• Pour la ventilation, laissez un espace d’au moins 10

cm autour du poste.

•N'obstruez pas les trous de ventilation.

•Évitez de placer le téléviseur sur des pentes ou

surfaces instable, car il pourrait basculer.

• Utilisez cet appareil sous des climats modérés.

• Le cordon d'alimentation doit être facilement

accessible. Évitez de placer le téléviseur ou le

coffre, etc. sur le cordon d'alimentation. Un cordon/ prise de raccordement endommagé peut causer un incendie ou vous iniger une décharge électrique. Tenez le cordon d'alimentation par la prise, et, évitez de débrancher le téléviseur en tirant le cordon d'alimentation. Ne touchez jamais le cordon/ la prise d’alimentation avec des mains humides,

car cela pourrait causer un court-circuit ou une

commotion électrique. Ne faites jamais de nœud au niveau du cordon d'alimentation, et ne le liez pas à d'autres cordes. Si le cordon d'alimentation est endommagé, il doit être remplacé par un technicien qualié.N'utilisez pas cette TV dans un environnement humide ou mouillé. N'exposez pas la TV aux liquides. Si un liquide se déverse à l'intérieur du poste, débranchez-la TV et faites-la vérier par un personnel qualié avant de continuer à l’utiliser.

Français - 18 -

+ 43 hidden pages

Salora 19LED8005TD Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual