salicru ACV30-PV, ACV30-015-S2 PV IAB, ACV30-022-4 PV IAB, ACV30-015-S2 PV IAD, ACV30-022-S2 PV IAD Brochure
...
ACV30-PV
Solar-powered pumping cabinets
ACV30-PV: Complete solution for solar-powered
pumping facilities
The ACV30-PV cabinets offer a fully finished solution for solar-powe-
red pumping facilities that use pumps of up to 5.5 kW. Depending on
the model, they can be mounted indoors or outdoors, and offer the
option of isolated systems (powered solely by solar panels), systems
with automatic switchover to the power generator or mains, and systems with manual switchover.
They incorporate the CV30-PV drive, which is specifically designed
for solar-powered pumping, and depending on the model they also include the BOOST MOD-320-PV booster module, which significantly
reduces the number of panels required. They are equipped with the
necessary protection at the solar panel input (DC circuit breaker and
over-voltage protector) and, where applicable, the AC input (circuit
breaker and contactor). As the distance between the drive and the
pump can be considerable, all models are fitted with an output ferrite in order to prevent potential pump breakdowns; moreover, for
particularly long distances (usually over 100 metres), the option of
cabinet-mounted sine-wave filters is available.
To ensure full control of the system, the cabinets also include a water
level sensor and digital clock/timer. This can be used to protect the
pump against dry operation, and to set the system’s operating times.
Without a doubt, it is a solution that offers installers tremendous convenience and reliability, owing to the fact that potential issues with
mounting and configuration are reduced to a minimum.
Applications:
The main application of the ACV30-PV solar-powered pumping cabinets is agricultural irrigation, either via the accumulation of water in
a tank or feeder pool for subsequent use or via direct irrigation from
a well.
Other applications include domestic consumption in isolated areas,
livestock water supply, fish farming, municipal and forestry irrigation,
and desert control.
Performances
∙ Simple to install and configure.
∙ Indoors or outdoors mounting.
∙ Isolated power supply or with automatic/manual switchover.
∙ Optional booster module.
∙ DC circuit breaker.
∙ AC circuit breaker for models with switchover to the generator or
mains.
∙ DC over-voltage protector (Type II, 1,000 VDC).
∙ 24 VDC water level sensor + weights.
∙ Clock/timer for ON/OFF control.
∙ Control console and ON/OFF switch on the cabinet door (indoor
mounting).
∙ Status indicator lights and ON/OFF switch on the cabinet door
(outdoor mounting).
∙ Output ferrite.
∙ ATS automatic switchover module (>2.2 kW models with
switchover).
∙ Optional cabinet-mounted sine wave filter, recommended for
systems where the distance between the drive and the pump is
over 100 metres.
Indoor mounting model
For added convenience, these models incorporate a control console mounted on the door
of the cabinet. Thanks to this design feature,
users do not need to open the cabinet in order to change the parameters or check the
status of the system. Moreover, ample space
has been set aside to incorporate additional
control elements, in accordance with the
needs of each facility.
Dimensions
Outdoor mounting model
For these models, the ON/OFF control and
system status indicators are accessed via
buttons on the door of the cabinet, thereby
maintaining a high level of protection. The
cabinet also includes a rain canopy to provide even more protection against inclement
weather.
800 / 700 mm
300 mm
600 / 500 mm
ACV30-PV Indoor mounting
600 / 500 mm
870 / 770 mm
325 mm
ACV30-PV Outdoor mounting
Loading...