SAGEMCOM Siconia LoRa ATGHMP915 V2 User Manual

Ref : 300449356-R11-000-01

- 1 -

User Manual

LoRa Motion Detector 915MHz

ATGHMP915 V2

.

2

This is the user manual for the motion detector sensor called SICONIA C1 ATGHMP915 from
Sagemcom. It presents the product and provides information on the installation and usage.

Sommaire

LEGAL NOTICE ......................................................................................................................... 4 1.

MANUFACTURER / FABRICANT ............................................................................................. 4 2.

SAFETY RECOMMENDATIONS / RECOMMANDATIONS DE SECURITE. ............................. 4 3.

REGULATORY NOTICES .......................................................................................................... 5

4.

4.1 Compliance with 47 CFR Part 15 Regulation Class B Devices. ..............................................................5

4.1.1 FCC Label statement ...................................................................................................................................5

4.2 Industry Canada Class B Notice ................................................................................................................5

4.2.1 Industry Canada Technical Acce p tance Certificate Information ............................................................6

ENVIRONMENTAL NOTICES - ROHS ...................................................................................... 6 5.

PRODUCT DESCRIPTION ........................................................................................................ 7 6.

6.1 Manufacturer sticker / Etiquette fabricant.................................................................................................8

6.2 Characteristics .......................................................................................................................................... 10

6.3 Installation ................................................................................................................................................. 11

LOGICAL DESIGN ................................................................................................................... 12 7.

PRODUCT IMPLEMENTATION ............................................................................................... 13 8.

3

Revision histor y

Revision

Date

Comment

1.0

March 27, 2017

First edition

1.1

Oct 2017

Legal notice improvment

Abbreviation

Abbreviation

Description

LoRaWANTM

Long Range Wireless Access Network. Long-distance wireless network to

communicate products with very low consumptions.

DevEUI

Unique identifier in the LoRaWANTM network guaranteed by the manufacturer and

obtained for the IEEE.

NFC

Near Field Communication. Communication standard at very short distance (a few
centimeters).

4

Legal notice 1.

This product is not designed, manufactured or intended for use, and should not be used, or sold or re ­sold for use, in connection with applications requiring fail-safe performance or in applications where the
failure of the products would reasonably be expected to result in personal injury or death, significant
property damage, or serious physical or environmental damage. Examples of such use include life
support machines or other life preserving medical devices or systems, air traffic control or aircraft
navigation or communications systems, control equipment for nuclear facilities, or missile, nuclear,
biological or chemical weapons or other military applications (“Restricted Applications ”). Use of the
products in such Restricted Applications is at the user’s sole risk and liabilit y.

This SAGEMCOM product and the final application of the SAGEMCOM product should be thoroughly
tested to ensure the functionality of the SAGEMCOM product as used in the final application. The
designer, manufacturer and reseller has the sole responsibility of ensuring that any end user product
into which the SAGEMCOM product is integrated operates as intended and meets its requirements or
the req uirem ents of its dir ect or indirect customers. SAGEMCOM has no responsibility whatsoever for
the integration, configuration, testing, validation, verification, installation, upgrade, support or
maintenance of such end user product, or for any liabilities, damages, costs or expenses associated
therewith, except to the extent agreed upon in a signed written document. To the extent SAGEMCOM
provides any comments or suggested changes related to the application of its products, such
comments or suggested changes is performed only as a courtesy and without any representation or
warranty whatsoever.

Manufacturer / Fabricant 2.

This product is designed and produced by SAGEMCOM Energy & Telecom SAS, you can contact us
at :

Ce produit est conçu et produit par SAGEMCOM Energy & Telecom SAS, vous pouvez nous contacter
à l'adresse suivante:

Sagemcom Energy & Telecom SAS
250 Route de l'Empereur
92500 Rueil-Malmaison Cedex - France
Tel.: [phone] – Fax: [phone]

Safety recommendations / Recommandations de séc urité. 3.

Do not disassemble, open or shred the product.
This product is not intended for dismantling.
If the product envelope is weakened or broken, the product must be replaced immediately.
Do not short-circuit the battery or make contact with a conductive object.
Do not expose the product to heat, fire or flame.
Keep out of reach of children.

Failure to follow these instructions can result in personal injury or property damage

This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with greater than 20cm between the
radiator & your body.

Ne pas démonter, ouvrir ou déchiqueter le produit.
Ce produit n'est pas conçu pour être démontable.
Si l'enveloppe du produit est affaiblie ou percée, le produit doit être remplacé immédiatement.
Ne court-circuitez pas la pile ou ne pas la mettre en contact avec un objet conducteur.
N'exposez pas le produit à la chaleur, au feu ou à la flamme.

5

N'installez pas le produit en permanence à moins de 20 cm d'une personne.
Tenir hors de la portée des enfants.

Le non-respect de ces instructions peut entraîner des blessures corporelles ou des dommages
matériels

Cet équipement est conforme aux limites d'exposition aux rayonnements FCC/ISED établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé à plus de 20 cm entre
l’émetteur et votre corps.

Regulatory No tices 4.

4.1 Compliance with 47 CFR Part 15 Regulation Cl a ss B Device s .

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the product.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

4.1.1 FCC Label statement

Per FCC 15.19:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

4.2 Indus t ry Canada Class B Notice

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Reglement Canadien sur le
matériel brouilleur.

This device complies with Industry Canada RSS Appliance radio exempt from licensing. The operation
is permitted for the following two conditions:

1. the device may not cause harmful interference, and

2. the user of the device must accept any interference suffered, even if the interference is likely to
jeopardize the operation.

Equipment Class

Frequency Range (MHz)

Digital Transmission System and Hybrid Systems

902.0-928.0