You have just purchased a SAGEM phone, we congratulate you; it is recommended that you read this handbook carefully in
order to use your phone efficiently and in the best conditions.
Your phone can be used internationally in the various networks (GSM 900 MHz and DCS 1800 MHz) depending on the
roaming arrangements with your operator.
We remind you that this phone is approved to meet European standards.
In a call context: Reject a call - hang up
In menus: Return to idle screen.
Green key
: Long press: Activate/Deactivate hands-free mode : press again
this key to switch into hands-free mode
WARNING:
do not use the phone in hands-free mode near to your ear, or
you may suffer hearing loss
In call context: Call - receiving a call
Right programmable key:
In idle screen: Access to certain functions (shortcuts)
In menus: Access to the selection shown on screen in the tab (*).
Left programmable key:
In idle screen: Access to certain functions (shortcuts)
In menus: Access to the selection shown on screen in the tab (*).
The navigator allows you:
- to navigate in the various functions pressing the relevant part
(S,T,W,X)
- to confirm your selection pressing the central part (
In idle screen, pressing OK displays the main menus icons.
Pressing OK followed by one of the nine keys of the keypad, you can display
a menu directly.
When composing a message:
Long press: switches from one input mode to another (T9, ABC, 123)
Short press: upper case/lower case
Hold down: In idle screen: Silent mode. In call reception mode: Short press
stops ring tone. In ring tone setting mode: Activate / deactivate ring tone
Stops sound in video or message playing, or in a game
A long press on the keys 2 to 9 directly displays the phonebook
2 to 9
(*) In this manual, when a function is chosen by pressing on this key, square brackets are used (e.g.: [
6Description
(Function available depending on model)
(Function available depending on model)
OK
).
Save
]).
- Ring tones volume setting.
- Deactivate the silent mode (if activated).
- In standby mode, flip closed and screen lit
off: a short press lights on the screen.
Incoming call:
- A short press on the bottom side of the key:
stops the ring tone.
- A long press on the bottom side of the key:
refuses the call.
Music player mode:
- Short press: volume setting.
- Long press: change to the next or last piece
of music.
Music player mode:
- Long press: accessing and quitting music
player mode.
- Short press: play or pause music.
Camera lens
Sub LCD
Stereo headset connector
The sub-LCD displays date and time, battery and network icons and incoming calls.
To ensure optimal screen legibility, check that you have removed the plastic protective film, clean the screen of you
telephone with a soft dry cloth to remove any finger marks or dust and make sure the background brightness is not
too strong.
Description7
Installing the SIM card and the battery
WARNING
Depending on the model, network configuration and associated subscription cards, certain functions may not be available.
Ensure that your SIM card is a 3 V SIM type that is compatible with your phone. Inserting an incompatible card will be indicated
by a message when your phone is switched on. Contact your operator.
Your phone is identified by its IMEI number. Write this number down, and do not keep it with your phone, because you may
be asked for it in the event of your phone being stolen, in order to prevent it from being used, even with a different SIM card.
In order to display the IMEI on your phone's screen, type: *#06#.
The SIM card is inserted under the phone's battery. Ensure that the phone is switched off and the charger disconnected.
1 Turn the phone back and slide the lock button up to remove the back cover.
2 Take out battery if already installed.
3 Slide the SIM card, with cut corner as shown on the phone, into the card holder with fold face down.
4 Place the battery by positioning first the top of it, as shown on the battery.
Replace the back cover, locking it first on the top part.
2143
8Description
Inserting the memory card
The memory card is inserted under the phone's battery.
- Switch off your phone.
- Remove the back cover.
- Remove the battery.
- Lift the flap. Insert the memory card.
- Close the flap and replace the battery.
- Replace the battery.
Using the memory card
The memory card is very fragile. Take care when you insert or remove the memory card.
Some memory cards must be formatted with a PC before first use with the phone.
Description9
Idle screen
The idle screen may contain the following information:
1 - The title bar icons:
Battery (if it flashes red, the battery must be charged immediately)
Silent mode (the ringtone is off)
Only emergency call is possible
Signal strength level (between 0 and 5 bars)
Message received (read your message), flashing: memory full (delete some messages)
Grey: GPRS unavailable
Black: GPRS connection
Flashing: GPRS connection on hand
WAP connection
2 - Date and time, in digital or analog mode
3 - Network provider
4 - Thumbnail centred on bottom line:
The main « Menu » thumbnail shows that the menus can be accessed by pressing OK. The following information may also
be displayed: « 1 message received » or « 1 call » (incoming call failed).
It can be deleted by pressing briefly.
10Idle screen
Quick start
Information on the SIM card
To use your phone, you need a card called SIM card. It contains personal
information that you can modify:
Secret codes (PIN(s): Personal Identification Numbers), these codes allow you
to protect access to your SIM card and phone
Phonebook
Messages
How special services work.
Your phone is compatible with the SIM 3V cards.
WARNING
This card must be handled and stored with care in order not to be damaged. If you should lose your SIM card, contact
your network provider immediately.
Please keep your SIM card out of reach of young children.
Getting started
When you switch on your phone for the first time, follow instructions displayed on the screen.
If access to the SIM card is protected, the device prompts you to enter the PIN number:
Enter the code
for security reasons.
After pressing [
date and time, make your choice for the following settings: time zone, daylight savings, skin, wallpaper, screensaver, ring
tone, volume, vibrate and voicemail number.
Quick start11
between 4 and 8 digits given to you when the SIM card was issued. These digits do not appear on the screen
OK
], the phone activates the SIM card settings and switches on again ; enter your PIN code again then the
If there are contacts saved in your SIM card, you are invited, if you wish, to copy them in the phone contacts memory.
Warning
If a wrong PIN number is entered three times in succession, your SIM card is blocked. You must then:
- Enter the PUK (Personal Unblocking Key) code provided by your operator, and validate.
- Enter your PIN number and validate.
- Enter your PIN number again and validate.
After 5 or 10 failed attempts (depending on the type of SIM card), the SIM card is definitely locked. You must then
contact your operator to obtain a new card.
Switching ON/OFF
When your phone is off, a short press on will turn it ON.
When the phone is ON, if your are browsing inside the menus, a short press on will come back to the idle screen. When
you are in the idle screen, a long press on will switch OFF the phone.
Network
From now on the phone searches for a network on which it can make calls. Once registered onto a network, it displays the
name of the network on the screen. You are then ready to send or receive a call.
If the network’s name appears, calls are possible on your operator's network.
If the letter R and a network name are displayed, calls are possible on a roaming network provider.
If the letter E is displayed without any network name, only the emergency services are accessible (ambulance, police,
fire brigade).
If the network icon flashes, the phone is in permanent search mode. There is no network available. The signal strength
indicator received allows you to display the quality of reception. If it indicates less than three bars, search for better
reception in order to call in good conditions.
12Quick start
First call
Dial the number you want to ring.
Press .
During the call, the call in progress icon flashes on screen and tones may indicate the establishment of the call.
While a call is connecting, the phone icon is flashing.
You can adjust the sound level by pressing the side volume keys.
At the end of the conversation press to hang up.
International call
Press 0 (hold down) to display « + », then the number of the called party.
Emergency services
Depending on the network you can obtain the emergency service with or without SIM card or when the keypad is
locked. It is enough to be in an area served by a network.
To obtain the international emergency service, dial
112
then press .
Receiving a call
When you receive a call, the number of your caller is displayed when it is presented by the network.
Press to answer, and speak.
To refuse the call, press .
To stop the ring tone or the vibrate, without refusing the call, press
Hands-free mode
During a call, press and hold to switch into hands-free mode.
WARNING:
in this mode do not bring the phone up to your ear.
All the numbers corresponding to incoming and outgoing calls are logged in the list of recent calls.
When on a call, pressing [
to mute mode, displaying menus, displaying the phonebook.
Pressing [
Mute
Quick start13
Options
] allows you to have access to different functions: switching to hands-free mode, switching
] allows you to switch off the microphone temporarily when you wish to mute your audio..
#
.
Using your phone
Improving antenna performance
The antenna is integrated in your phone, under the back cover at the top.
Avoid putting your fingers on this area when the phone is switched ON.
If your fingers obstruct the antenna, the phone may have to operate with a higher
power level than usual; decreasing its efficiency quickly. It could also affect the
quality of your communications.
Increase the battery life of your phone
- Don't press the keys when not necessary: each keypress activates the backlight, and uses much power.
- Don't obstruct the antenna with your fingers.
- Activation of Bluetooth function (my501C model) reduces the phone battery life. We advise you to deactivate it when not
in use.
14Using your phone
Charging the battery
Your phone is powered by a rechargeable battery. A new battery must be
charged for 4 hours at least before being used for the first time. It reaches its
optimum capacity after a few cycles of use.
When your battery has been discharged, the empty battery icon flashes. In this
case recharge your battery for at least 15 minutes before making any calls in
order not to be cut off quickly.
To recharge the battery:
Connect the charger to a socket.
Plug the end of the cable into the bottom connector of the phone.
The phone is then charging up. The battery icon scrolls up and down to indicate
that it is charging. When the battery is fully charged, the charging stops on its
own. Disconnect the cable.
When charging, the battery may warm up, this is normal.
WARNING
If the battery has entirely discharged, the phone cannot start. Plug the phone to the charger. The phone will switch on
after a few minutes of charge. You can use the phone again when the
WARNING
There is danger of explosion if the battery is placed in an incorrectly way or if it is exposed to fire.
Do not short circuit it.
The battery does not have any part that you can change.
Do not try to open the battery casing.
Use only the appropriate chargers and batteries as shown in the phone manufacturer's catalogue.
The use of other types of chargers or batteries may be dangerous or invalidate the warranty.
Used batteries must be disposed of in the appropriate places.
We advise you to take the battery out if you plan not to use the phone for extended periods.
You are strongly advised not to connect your phone to the charger if it doesn’t contain a battery.
The charger is a safety step-down transformer, it is forbidden to modify, alter or replace it by another component (power
supply plug, etc).
Using your phone15
Start
option is displayed on the screen.
Phonebook
Using the phonebook
Enter the
Phonebook
When a contact is selected, an icon is displayed in the title bar:
contact stored in the SIM card
contact stored in the phone
contact stored in the Fixed Dialling. See
activation.
You can search for a contact quiclky by typing the first letters (up to three). You can display it by pressing
menu, the contacts list is displayed if you already get some (otherwise, go to
PIN2 number
and
Fixed dialling
in
Security
Storing a new contact
There are two options to store a contact :
Options
1) select [
2) enter in
- Enter the last name and press the navigator (OK).
- Enter the number and press the navigator (
Note:
- Press [
], then select
Add contact
you can fill other fields if you store the contact in the phone memory (email, address, ringtone, photo, etc.).
Save
] to store it.
Add phone contact
pressing OK, then select
OK
or
Add SIM contact
Telephone, SIM card
).
, or
or
Fixed directory
Calling a contact
Several ways:
- Select a contact. Press
- Select a contact, press OK, his number is displayed, press [
- Direct call from the idle screen (only for the contacts stored in the SIM card memory): type the number with which the
contact was saved then (example : 21 ) or the number then , the number is displayed, confirm.
16Phonebook
to start the call.
Call
] to start the call.
Storing a new contact
Menu for more details about this
OK
.
.
).
Contact options
To display the various options, select a contact and press [
Modify contact
Modify what you want and validate then select
Send message
To send a SMS or a MMS to a contact (see chapter
Send by
To send a contact details by message or Bluetooth (my501C model) (see chapters
Export
It allows you to copy one or several contact details to the
Several options:
Current
: the details of the contact selected are copied,
-
-
Multiple
: the details of the contacts you select are copied,
-
All
: the details of all the contacts are copied.
Copy to SIM / Copy to mobile
This allows you to copy your phonebook contacts from one memory to the other. Only the name and the first phone number
will be copied.
My numbers
You can create the entries corresponding to your own numbers in order to consult them when necessary.
Select
My numbers
and validate. Enter the different details and validate.
Memory
Select
SIM
or
Phone
-
Phone
various other features. If you lack memory, check if you can free some space.
SIM
: available memory only for contacts.
-
Phonebook17
and validate.
: the screen displays the amount of memory used. The memory capacity is shared between the phonebook and
Options
].
Save
once the modifications completed.
Messages
).
Multimedia/My Contacts
Messages
directory.
and
Connectivity
).
Delete
It allows you to delete the contact(s) selected or all the contacts.
Set as my card/Business card
The details of a contact stored in the phone memory can be saved in a business card.
- Select a contact and press [
- Select
Set as my card
SMS or MMS.
Options
and [OK]. The details are saved as
].
Business card
. Then you can read it, modify it or send it by
Download SIM card/Backup to SIM
This allows you to copy all the SIM card contacts to the phone memory and vice versa.
Synchronize
You can synchronize your phonebook with your archives stored in your operator’s network depending on the options offered
by your operator.
You have only to activate Bluetooth (my501C model) or configure your USB connection in your phone.
Add to mailing list
This allows you to add a contact to a mailing list.
Settings
-
List choice
: This menu allows you to select the default phonebook (SIM, Phone, SIM and Phone) displayed when the
phone switches on.
Filter criteria
-
: This menu allows you to select the way to sort contacts in the phonebook (by name or first name).
Mailing lists
A mailing list allows you to group contacts: this list can be used to send messages easily to all the list contacts.
- In the phonebook, select the
Options
- Press [
- Select
- Select the list type (SMS or MMS).
- Enter a name and press
- Then, on a list press [
18Phonebook
].
Add mailing list
.
OK
Options
Mailing Lists
.
]. Select
tab pressing the navigator rightwards.
Add contact
each time you want to add a contact in the list.
Messages
From this menu, you are able to send SMS and MMS. MMS is a Multimedia Message Service, which allows you to enclose
photos, audio files, and others rich contents to your messages; these messages can even be composed of several slides.
MMS are differently charged to SMS are. Please contact your network provider to get more information on their cost and the
service availability.
Creating a text message
- Select
Messages/Create message
- Type your text. The T9 mode is applied by default.
The language used is the one selected on the display of the phone (if the language selected is not compatible with the Easy
Message T9™, the English language will be automatically selected).
The Easy Message T9™ mode helps you to easily write your messages.
Using T9 Mode
Once you agree on the word proposed on the screen, press the navigator rightwards to validate it or on the
validates and inserts a space after the word), and go on writing the next word.
If the word you are expected is not proposed, please add characters until you get the message
validate if the word displayed suits you or modify this word before adding it in the dictionary.
If you do not want to use T9 mode, you can change of input mode (which appear at the top right of the title bar) pressing :
the
123 mode
make the letter wanted appear (for example: press twice the
Upper case
A short press on will display the next letter in upper case ( icon).
Punctuation characters
Punctuation characters are obtained by pressing the 1 key (except in
by briefly pressing ).
Messages19
Press once the key corresponding to the letter chosen and compose the word by continuing to press the
keys corresponding to the various letters without paying attention to the display: the word is highlighted.
The same sequence of keys pressed can correspond to several words, existing on the dictionary. If the word
that appears is not the word you expected, press the navigator upwards to scroll through the words
corresponding to this key sequence.
allows you to type numbers and the
.
0
key (which
Add a word
? Press
Yes
and
ABC mode
allows you to type letters: press on one key several times to
2
key to display B).
123
mode), or with the help of
Insert
mode (fast access
Accented characters
Accented characters are generated automatically in T9 mode.
In ABC mode accented characters are available by pressing the key supporting the non-accented character repeatedly.
Saving the message
- Select
Save
Drafts
or
- Select
if you do not want to send the message immediately or if you want to send it several times. It is saved in the
menu.
Save as template
to use it again as a template. It is saved in the
Templates
menu.
Sending the message
- Once the text entered, press the navigator or press [
- Enter the receiver’s number or take it in your phonebook pressing [
You alson can select a contacts list in your phonebook.
Send.
- Select
Note:
if the message type (SMS or MMS) has not been selected when composing the message, the phone prompts for a
cofirmation.
You can use an email address if the message is a MMS.
Options
] and select
Options
Add recipient
] then selecting
.
Contacts
.
Receiving messages
When you receive a message, the phone plays the ring tone that you selected, and a message icon comes on the screen of
your phone.
If you do not read the messages, this icon remains displayed on the screen. When it flashes, the memory is full.
Receiving icons, backgrounds or tunes can take several seconds. An icon is flashing when the download of your message is
in progress.
Note that you have two different possibilities for receiving MMS: automatically or manually; if « manual mode » is activated,
then you will receive only a notification in your Inbox, meaning that a MMS is available on the MMS Server; select Retrieve
in the options when you want to retrieve the MMS from the network.
For more details about automatic and retrieval modes, see « Options » on page 22.
20Messages
Messages menu
Inbox
Messages are listed in chronological order, the latest one being displayed first.
The quantity of Not Read and Not Retrieved messages is shown. Not Retrieved and Not Read messages are shown in bold.
Outbox
This menu displays the messages that have not been sent. You can therefore send them again.
Sentbox
The
Sentbox
menu (see page 22).
Too many messages saved will quickly fill up the available memory and no further messages will be received.
For each message, its characteristics (shown with an icon) and the time (or date) of sending are displayed on the screen.
Select a message and press
Choose one of the options given: Read, Modify, Forward, Delete, Delete all.
menu is used to store all your sent messages if you activated the option
OK
.
Drafts
When you store a composed message, it is stored among the drafts.
Select a message and press [
If you select a message and press
If you want to send it, select
Options
]. The options are: Delete, Read, Modify, Details.
OK
, you can modify it.
Modify
then press [
Options
] and select
Send
Tem pla tes
When composing a message, if you selected the
The same options as for the drafts are available for the templates.
Messages21
Save as template
option, the template is saved in this menu.
.
Store sent messages
in the
Options
Options
Choose one of the options given: SMS or MMS.
The SMS sending options are: store sent messages, acknowledgment, reply given, period of validity (during that period, the
network provider will try to send the message), message format, msg centre n°.
The MMS options are:
Store sent messages
-
-
Retrieval mode
gives you the retrieve later option.
Priority
: selection of a priority to send a message.
-
-
Request delivery report
-
Period of validity
Advanced settings
-
Send delivery report
MMS ignore
-
-
MMS server
-
Display Bcc
Sender visibility
-
-
Maximum size
: it is highly recommended that you keep this function deactivated, in order to avoid a full memory.
: if you are in a poor coverage area, it may be more convenient to choose the manual retrieval mode which
: request of a delivery report when sending a message.
: during that period, the network provider will try to send the message.
: sending a delivery report when receiving a message.
: if you want to deactivate the reception of any MMS in your phone.
: to select another MMS provider, or set the parameters of a new MMS provider.
: if you want to activate/deactivate this display.
: you choose to display or not your phone number on the receiver’s phone screen, with that message.
: if you want to activate/deactivate the option of maximum size supported for the MMS.
Memory
You may know the memory available for saving messages.
Choose one of the options given: SMS or MMS.
The SMS screen displays the memory available either on the SIM card or on the phone.
The MMS screen displays how much memory is used in Kbytes.
Local info.
This menu is used to activate reception of information broadcast by the network.
You can choose whether you want to receive this information or not (please contact your network provider).
Call voicemail
This function allows you to call your voicemail.
This number depends on the operator.
22Messages
Loading...
+ 50 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.