You have just purchased a SAGEM phone, we congratulate you; it is recommended that you read this handbook carefully in
order to use your phone efficiently and in the best conditions.
Your phone can be used internationally in the various networks (GSM 900 MHz and DCS 1800 MHz or PCS 1900 MHz)
depending on the roaming arrangements with your operator.
This phone is approved to meet European standards.
In a call context: Reject a call - hang up
In menus: Return to idle screen.
Green key
: Short press: Activate/Deactivate hands-free mode (
do not use the phone in hands-free mode near to your ear, or you may suffer
hearing loss)
In call context: Call - receiving a call
Right programmable key:
In idle screen: Access to certain functions (shortcuts)
In menus: Access to the selection shown on screen in the tab (*).
Left programmable key:
In idle screen: Access to certain functions (shortcuts)
In menus: Access to the selection shown on screen in the tab (*).
The navigator allows you:
- to navigate in the various functions pressing the relevant part
- to confirm your selection pressing the central part (
In idle screen, pressing OK displays the main menus icons.
Pressing OK followed by one of the nine keys of the keypad, you can display
a menu directly.
Note:
the phone menus being numbered, you can directly access a menu
typing the various numbers.
When composing a message:
Long press: switches from one input mode to another (ABC/T9)
Short press: upper case/lower case/figures
In idle screen: Hold down: Silent mode. In call reception mode: Short press
stops ring tone. In ring tone setting mode: Activate / deactivate ring tone
Stops sound in video or message playing, or in a game
A long press on the key 1 calls voicemail (if the number has been stored in
1
Settings/Calls/Voicemail
A long press on the keys 2 to 9 gives access to speed dialing.
2 to 9
(*) In this manual, when a function is chosen by pressing on this key, square brackets are used (e.g.: [
6Description
(Function available depending on model)
(Function available depending on model)
menu)
OK
).
Save
WARNING:
]).
Incoming call:
- Short press
- Long press: refuses the
When listening to music:
- From the idle screen:
- From the Music player
The sub-LCD displays date and time, battery and network icons and incoming calls.
To ensure optimal screen legibility, check that you have removed the plastic protective film, clean the screen of you
telephone with a soft dry cloth to remove any finger marks or dust and make sure the background brightness is not
too strong.
Description7
: stops the ring
tone.
call.
• Short press
• Long press: access to
menu:
• Short press
: access to
Music player (flap open)
Music player and start
playing
: play/pause
music
- Short press
- Long press
- In standby mode, flap
Charger connector
: Set the
volume
: Change to
the next or previous
music track
closed and screen lit
off: a short press lights
on the screen.
Camera lens
Sub-LCD
Installing the SIM card and the battery
WARNING
Depending on the model, network configuration and associated subscription cards, certain functions may not be available.
Your phone is identified by its IMEI number. Write this number down, and do not keep it with your phone, because you may
be asked for it in the event of your phone being stolen, in order to prevent it from being used, even with a different SIM card.
In order to display the IMEI on your phone's screen, type: *#06#.
Ensure that the phone is switched off and the charger disconnected.
1 Turn the phone back and remove the back cover by sliding it downwards.
2 Slide the SIM card into the card holder with fold face down and cut corner as shown in the figure below.
3 Place the battery by positioning first the top of it.
4 Replace the back cover by sliding it.
2143
8Description
Inserting the memory card
- Open the protective cover of the slot located on the side of the phone and
insert the memory card pushing it until it clicks into place.
- To remove the card, first make sure that no application is accessing the
card, then slightly push the top edge of the card to release it and pull it out
of the slot.
Using the memory card
The memory card is very fragile. Take care when you insert or remove the memory card.
Some memory cards must be formatted with a PC before first use with the phone.
Description9
Idle screen
The idle screen may contain the following information:
1 - The title bar icons:
Battery (if it flashes red, the battery must be charged immediately)
Silent mode (the ringtone is off)
Only emergency call is possible
Signal strength level (between 0 and 5 bars)
Message received (read your message), flashing: memory full (delete some messages)
Grey: GPRS unavailable
Black: GPRS connection
Flashing: GPRS connection on hand
WAP connection
2 - Date and time
3 - Network provider
4 - Thumbnail centred on bottom line:
The main « Menu » thumbnail shows that the menus can be accessed by pressing OK.
Information messages on calls, messages or network messages received may also be displayed. They can be deleted by
pressing key briefly.
10Idle screen
Quick start
Information on the SIM card
To use your phone, you need a card called SIM card. It contains personal
information that you can modify:
- Secret codes (PIN(s): Personal Identification Numbers), these codes allow
you to protect access to your SIM card and phone
- Phonebook
- Messages
- How special services work.
WARNING
This card must be handled and stored with care in order not to be damaged. If you should lose your SIM card, contact
your network provider immediately.
Please keep your SIM card out of reach of young children.
Getting started
When you switch on your phone for the first time, follow instructions displayed on the screen.
If access to the SIM card is protected, the device prompts you to enter the PIN number:
Enter the code
for security reasons.
Enter your PIN code then the date and time and make your choice for the others settings.
Quick start11
between 4 and 8 digits given to you when the SIM card was issued. These digits do not appear on the screen
Warning
If a wrong PIN number is entered three times in succession, your SIM card is blocked. You must then:
- Enter the PUK (Personal Unblocking Key) code provided by your operator, and validate.
- Enter your PIN number and validate.
- Enter your PIN number again and validate.
After 5 or 10 failed attempts (depending on the type of SIM card), the SIM card is definitely locked. You must then
contact your operator to obtain a new card.
Switching ON/OFF
When your phone is off, a short press on will turn it ON.
When the phone is ON, if your are browsing inside the menus, a short press on will come back to the idle screen. When
you are in the idle screen, a long press on will switch OFF the phone.
Network
From now on the phone searches for a network on which it can make calls. Once registered onto a network, it displays the
name of the network on the screen. You are then ready to send or receive a call.
If the network’s name appears, calls are possible on your operator's network.
R
If the letter
If the letter
fire brigade).
If the network icon flashes, the phone is in permanent search mode. There is no network available. The signal strength
indicator received allows you to display the quality of reception. If it indicates less than three bars, search for better
reception in order to call in good conditions.
12Quick start
and a network name are displayed, calls are possible on a roaming network provider.
E
is displayed without any network name, only the emergency services are accessible (ambulance, police,
First call
Dial the number you want to ring.
Press .
During the call, the call in progress icon flashes on screen and tones may indicate the establishment of the call.
While a call is connecting, the phone icon is flashing.
You can adjust the sound level by pressing the side volume keys.
At the end of the conversation press to hang up.
International call
Press 0 (hold down) to display « + », then the number of the called party.
Emergency services
Depending on the network you can obtain the emergency service with or without SIM card. It is enough to be in an area
served by a network.
To obtain the international emergency service, dial
112
then press .
Receiving a call
When you receive a call, the number of your caller is displayed when it is presented by the network.
Press to answer, and speak.
To refuse the call, press .
To stop the ring tone or the vibrate, without refusing the call, press .
Hands-free mode
To change to hands-free mode during a call, make a short press on the green key then press [
of the amplified mode.
WARNING:
in this mode do not bring the phone up to your ear.
All the numbers corresponding to incoming and outgoing calls are logged in the list of recent calls.
When on a call, pressing [
Pressing [
Mute ON
Quick start13
Options
] allows you to switch off the microphone temporarily when you wish to mute your audio.
] allows you to have access to different functions.
Yes
] to confirm activation
Using your phone
Improving antenna performance
The antenna is integrated in your phone, under the lower part of the back cover.
Avoid putting your fingers on this area when the phone is switched ON.
If your fingers obstruct the antenna, the phone may have to operate with a higher
power level than usual; decreasing its efficiency quickly. It could also affect the
quality of your communications.
Increase the battery life of your phone
- Don't press the keys when not necessary: each keypress activates the backlight, and uses much power.
- Don't obstruct the antenna with your fingers.
- Activation of Bluetooth® function reduces the phone battery life. We advise you to deactivate it when not in use.
14Using your phone
Charging the battery
Your phone is powered by a rechargeable battery. A new battery must be
charged for 4 hours at least before being used for the first time. It reaches its
optimum capacity after a few cycles of use.
When your battery has been discharged, the empty battery icon flashes. In this
case recharge your battery for at least 15 minutes before making any calls in
order not to be cut off quickly.
To recharge the battery:
Connect the charger to a socket.
Plug the end of the cable into the side connector of the phone.
The phone is then charging up. The battery icon scrolls up and down to indicate
that it is charging. When the battery is fully charged, the charging stops on its
own. Disconnect the cable.
When charging, the battery may warm up, this is normal.
WARNING
If the battery has entirely discharged, the phone cannot start. Plug the phone to the charger. The phone will switch on
after a few minutes of charge. You can use the phone again when the
WARNING
There is danger of explosion if the battery is placed in an incorrectly way or if it is exposed to fire.
Do not short circuit it.
The battery does not have any part that you can change.
Do not try to open the battery casing.
Use only the appropriate chargers and batteries as shown in the phone manufacturer's catalogue.
The use of other types of chargers or batteries may be dangerous or invalidate the warranty.
Used batteries must be disposed of in the appropriate places.
We advise you to take the battery out if you plan not to use the phone for extended periods.
You are strongly advised not to connect your phone to the charger if it doesn’t contain a battery.
The charger is a safety step-down transformer, it is forbidden to modify, alter or replace it by another component (power
supply plug, etc).
Using your phone15
Start
option is displayed on the screen.
Phonebook
Using the phonebook
Enter the
Phonebook
When a contact is selected, an icon is displayed in the title bar:
contact stored in the SIM card
contact stored in the phone
contact stored in the Fixed Dialling. See
activation.
You can search for a contact quiclky by typing the first letters (up to three). You can display it by pressing
menu, the contacts list is displayed if you already get some (otherwise, go to
PIN2 number
and
Fixed dialling
in
Security
Storing a new contact
There are two options to store a contact :
Options
1) select [
2) enter in
- Enter the last name and press the navigator (OK).
- Enter the number and press the navigator (
Note:
- Press [
], then select
Add contact
you can fill other fields if you store the contact in the phone memory (email, address, ringtone, photo, etc.).
Save
] to store it.
Add phone contact
pressing OK, then select
OK
or
Add SIM contact
Telephone, SIM card
).
, or
or
Fixed directory
Calling a contact
Several ways:
- Select a contact. Press
- Select a contact, press OK, his number is displayed, press [
- Direct call from the idle screen (only for the contacts stored in the SIM card memory): type the number with which the
contact was saved then (example : 21 ) or the number then , the number is displayed, confirm.
16Phonebook
to start the call.
Call
] to start the call.
Storing a new contact
Menu for more details about this
OK
.
.
).
Speed Dialing
You can assign a short number to a contact (from 2 to 9).
- From the idle screen, make a long press on the short number selected.
- The Speed Dialing function is displayed.
- Enter the phone number of your contact or press the [
OK
- Press [
] to confirm.
Contacts
] key to select a contact already saved.
Contact options
To display the various options, select a contact and press [
Modify contact
Modify what you want and validate then select
Send message
To send a message to a contact (see chapter
Messages
Send by message
To send a contact details by message (see chapter
Send by Bluetooth
To send the details of one, several or all the contacts by Bluetooth®.
®
Add Speed-Dialing
You can assign one of the numbers proposed to the contact selected (see
Copy to SIM / Copy to mobile
This allows you to copy your phonebook contacts from one memory to the other. Only the name and the first phone number
will be copied.
Phonebook17
Options
].
Save
once the modifications completed.
).
Messages
).
Speed Dialing
).
Export
It allows you to copy one or several contact details to the
Several options:
-
current
: the details of the contact selected are copied,
-
multiple
: the details of the contacts you select are copied,
all
: the details of all the contacts are copied.
-
Multimedia/My Contacts
directory.
My numbers
You can create the entries corresponding to your own numbers in order to consult them when necessary.
Select
My numbers
and validate. Enter the different details and validate.
Memory
Select
SIM
or
Telephone
-
Telephone
various other features. If you lack memory, check if you can free some space.
SIM
: available memory only for contacts.
-
and validate.
: the screen displays the amount of memory used. The memory capacity is shared between the phonebook and
Delete
It allows you to delete the contact(s) selected or all the contacts.
Set as my card/Business card
The details of a contact stored in the phone memory can be saved in a business card.
- Select a contact and press [
- Select
Set as my card
message or Bluetooth
Options
and [OK]. The details are saved as
®
.
].
Business card
. Then you can read it, modify it or send it by
Copie SIM -> phone/Copy phone -> SIM
This allows you to copy all the SIM card contacts to the phone memory and vice versa.
18Phonebook
Synchronize
You can synchronize your phonebook with your archives stored in your operator's network depending on the options offered
by your operator with a GSM or GPRS connection from your phone.
You can also synchronize your phonebook with your archives stored in your computer. You have only to activate Bluetooth
or configure your USB connection in your phone (see chapter
Connectivity
).
Add to mailing list
This allows you to add a contact to a mailing list.
Settings
-
List choice
: This menu allows you to select the default phonebook (SIM, Phone, SIM and Phone) displayed when the
phone switches on.
Sorting
: This menu allows you to select the way to sort contacts in the phonebook (by name or first name).
-
Mailing lists
A mailing list allows you to group contacts: this list can be used to send messages easily to all the list contacts (only contacts
stored in the phone memory).
- In the phonebook, select the
- Press [
Options
- Select
- Enter a name and press
- Then, on a list press [
Phonebook19
].
Add mailing list
.
OK
Options
Mailing Lists
.
]. Select
tab pressing the navigator rightwards.
Add contact
each time you want to add a contact in the list.
®
Messages
From this menu, you are able to send SMS and MMS. MMS is a Multimedia Message Service, which allows you to enclose
photos, audio files, and others rich contents to your messages; these messages can even be composed of several slides.
MMS are differently charged to SMS are. Please contact your network provider to get more information on their cost and the
service availability.
Creating a text message
- Select
Messages/Create Message
- Type your text. The T9 mode is applied by default.
The language used is the one selected on the display of the phone (if the language selected is not compatible with the Easy
Message T9®, the English language will be automatically selected).
The Easy Message T9® mode helps you to easily write your messages.
When the text has been entered, [
: to send the message by entering the recipient's number or selecting it in the phonebook.
: allows you to precise a subject to your message.
: to create your personal dictionary.
: to display a preview of the message once composed.
: allows you to select a duration to make the text scroll automatically before sending the message.
: to insert accented characters, special characters or punctuation.
: to select the message type (SMS or MMS).
(see page 23).
is used to delete all text entered and quit.
: to save a draft in memory.
: allows you to keep as a template a message in order to use it again.
.
Options
] is used to access the functions offered:
: to insert various objects into your message.
(see page 21)
is used to modify size of characters.
, T9 mode
(see page 21) and
languages
.
Using T9 Mode
Once you agree on the word proposed on the screen, press the navigator rightwards to validate it or on the
validates and inserts a space after the word), and go on writing the next word.
If the word you are expected is not proposed, please add characters until you get the message
validate if the word displayed suits you or modify this word before adding it in the dictionary.
If you do not want to use
type letters: press on one key several times to make the letter wanted appear (for example: press twice the 2 key to display B).
Upper case/Lower case/Figures
A short press on switches the text to upper case, lower case or figures.
Punctuation characters
Punctuation characters are obtained by pressing the 1 key (except in
by briefly pressing ).
Accented characters
Accented characters are generated automatically in T9 mode.
In ABC mode accented characters are available by pressing the key supporting the non-accented character repeatedly.
Press once the key corresponding to the letter chosen and compose the word by continuing to press the
keys corresponding to the various letters without paying attention to the display: the word is highlighted.
The same sequence of keys pressed can correspond to several words, existing on the dictionary. If the word
that appears is not the word you expected, press the navigator upwards to scroll through the words
corresponding to this key sequence.
T9 mode
, you can switch to ABC mode pressing (long press). The
123
mode), or with the help of
Add a word
ABC mode
? Press
allows you to
Insert
mode (fast access
0
key (which
Yes
and
Saving the message
- Select
Save
Drafts
or
- Select
if you do not want to send the message immediately or if you want to send it several times. It is saved in the
menu.
Save as template
to use it again as a template. It is saved in the
Templates
menu.
Sending the message
- Once the text entered, press the navigator or press [
- Enter the receiver’s number or take it in your phonebook pressing [
You alson can select a contacts list in your phonebook.
Messages21
Options
] and select
Options
Add recipient
] then selecting
.
Contacts
.
Loading...
+ 48 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.