WE RECOMMEND SAFETY FIRST
• Carefully read all instructions
before operating the blender
for the first time and save for
future reference.
• Remove any packaging
material and promotional
stickers before using the
blender for the first time.
• To eliminate a choking
hazard for young children,
remove and safely discard the
protective cover fitted to the
power plug of this appliance.
• Do not place the blender near
the edge of a bench or table
during operation. Ensure
that the surface is level, clean
and free of water, flour, etc.
Vibration during operation
may cause the appliance to
move.
• Do not place the blender on
or near a hot gas or electric
burner, or where it could
touch a heated oven.
• Always ensure the blender is
properly assembled before
use. Refer to assembly and
operation instructions.
• Use only the blender jug and
lid supplied with the blender.
• Always ensure the blender
lid is firmly positioned on the
blender jug before operating.
• Always ensure the blender
is turned off by pressing the
POWER
button on the
control panel. Then switch
the appliance off at the
power outlet and unplug the
cord. Make sure the motor
and blades have completely
stopped before attempting
to move the appliance, or
when the blender is not in use
and before disassembling,
cleaning and storing.
• Do not operate the appliance
continuously with heavy
loads for more than 10
seconds. Allow the motor to
rest for 1 minute between
each use.
• Do not leave the blender
unattended when in use.