SAF PhoeniX, PhoeniX M ETSI User Manual
Table of Contents
CFIP PhoeniX IDU Technical Specification ......................................................... 1
CFIP PhoeniX M IDU Technical Specification ..................................................... 3
CFIP PhoeniX ODU ........................................................................................ 5
CFIP PhoeniX M ODU .................................................................................... 8
CFIP PhoeniX IDU Technical Specification
EOW interface
Management port
(RS-232 interface)
Extension port
Grounding screw
DC port
Alarm LEDs
Modem
Channel Bandwidths 3.5, 7, 14, 28, 40, 56 MHz
Modulations QPSK, 16APSK, 32APSK, 64QAM, 128QAM, 256QAM
Capacity 9 - 366 Mbps
Supported ODUs CFIP ODU
Applications
Configuration
Protection switching Hot Stand-by (<50ms), Space/Frequency diversity (hitless, errorless)
Ports
Ethernet 4x1000Base-T, RJ-45
E1/T1 20 E1/T1, RJ-45
Serial port for configuration RS-232, DB-9 connector
Auxiliary alarm
interface
4x1000Base-T user
data and
management ports
1+0, 1+1 (HSB, SD, FD),
2+0, 3+0, 4+0 (built-in Ethernet aggregation)
Ring/Mesh (with RSTP),
20 E1/T1
channel ports
N-Type female
to ODU
Alarm port 4 digital inputs, 4 relay outputs (26 pin hi-density D-SUB)
ODU port N-Type Female
EOW port 3.5mm headset and mic, 64 Kbps
Extension/protection port RJ-45
DC power connector
2ESDV-02 with screw locks
© SAF Tehnika JSC
Ver. 1.3, 2012 March
CFIP PhoeniX series
Hybrid split mount system
Management features
Management port Ethernet with VLAN support or serial (RS-232)
Monitoring via Telnet, WEB GUI, NMS, SNMP Manager, Serial interface
SNMP Yes, SNMP traps, MIB, SNMP v1/v2c
EMS Web based, HTTP
ATPC feature Yes
ACM feature Hitless 0ms
Ethernet
Switch type Managed Gigabit Ethernet Layer 2
Max frame size 9728 bytes
MAC table 4K entries; automatic learning and aging
Packet buffer 128KB; non-blocking store&forward
Flow Control 802.3x
VLAN support 802.1Q (up to 4K VLAN entries)
QinQ (Double Tagging) Yes
QoS
QoS queuing Fixed or weighted (configurable ratio)
Spanning Tree Protocol
Mechanical & Electrical
Temperature Range / Humidity -5°C to +55°C / 5% to 95%
Dimensions: HxWxD, mm / weight, kg 1U (45x430x240) / 3.1
Max. power consumption 20-30W
IDU-ODU connection
DC port -40.5V to -57V DC (conforms to ETSI EN 300 132-2)
Built-in DC and IF port surge protection Conforms to ETSI EN 301 489-1; EN 61000-4-5; IEC 61000-4-5
64 level DiffServ (DSCP) or 8 level 802.1p mapped in 4
prioritization queues with VLAN support
802.1D-2004 RSTP
802.1Q-2005 MSTP
Belden 9914/RG-8 cable (300 m), RG213 cable (200 m),
N-Type connectors
© SAF Tehnika JSC
Ver. 1.3, 2012 March
CFIP PhoeniX series
Hybrid split mount system
CFIP PhoeniX M IDU Technical Specification
Data modules
Expanded Base - 14 x E1, high-density Molex connector
- 2 x E1, RJ-48C connector
- Voice, Data ORW RJ-48C connectors
- 100BaseTX, 1-100 Mbps, two RJ-45 ports
42E1 Base - 42 x E1, 3x high-density Molex connector
- Voice, Data ORW RJ-48C connectors
- 100BaseTX, 1-100 Mbps, two RJ-45 ports
GigE Base - 4x10/100/1000Base-T ports with RJ-45 connector
- Ethernet SFP connector
- 2 x E1, RJ-48C connector
- Voice, Data ORW RJ-48C connectors
Optional modules
16E1 Expansion module - 14 x E1, high-density Molex connector
- 2 x E1, RJ-48C connector
21E1 Expansion module - 21 x E1, 2x high-density Molex connector
STM-1 Optical mini module
STM-1 Electrical mini module
Unified Modem
Modulation QPSK, 16QAM, 32QAM, 128QAM, 256QAM
Channel bandwidth 7 – 56 MHz
Capacity up to 348 Mbps
Configurations - 1+0, 1+1 (HSB/SD/FD)
ACM Yes
Connectors TNC (Female) and RJ45 (for XPIC)
Intermediate Freq. Range Tx carrier: 350 MHz, Rx carrier: 140 MHz
IDU-ODU cable 300m
Emissions mask ETC 300 234, ETSI EN 301 216, FCC Part 101.111
FEC concatenated Reed-Solomon Coding with Trellis Coded Modulation, or Convolutional
Gigabit Ethernet
Switch type Managed Gigabit Ethernet Layer 2
Max frame size 9728 bytes
MAC table 4K entries; automatic learning and aging
Flow Control 802.3x
VLAN support 802.1Q (up to 4K VLAN entries)
QinQ (Double Tagging) Yes
QoS
Spanning Tree Protocol 802.1D-2004 RSTP
STM-1, Single mode 1310 nm, SC Duplex Transceiver, Unc onditionally eyesafe
laser IEC 825/CDRH Class 1 Compliant
STM-1, 2xBNC, ITU-T Rec. G.703, 75Ohm
- East-West repeater within single unit
- Ethernet Ring/Mesh (with RSTP)
- E1 ring protection
- STM-1 ADM (up to 63E1 per STM-1)
- 2+0, 3+0, 4+0 (Ethernet aggregation)
code
Port priority, 802.1Q VLAN Tag Priority, IPv4 TOS priority, DiffServ (DSCP)
priority
© SAF Tehnika JSC
Ver. 1.3, 2012 March
CFIP PhoeniX series
Hybrid split mount system
Loading...