
SA-15T-PW POWERED SPEAKERS
SeismicAudioSpeakers.com Facebook.com/SeismicAudio Twitter.com/SeismicAudio 1-877-347-6423 Page 1

Caution: To reduce the risk of
Warning: To reduce the risk of fire or
This symbol, wherever it appears, alerts you
be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you
electrical shock, do not remove the
cover (or back). No user serviceable
parts inside; refer to servicing to
qualified personnel.
electrical shock, do not expose this
equipment to rain or moisture.
SeismicAudioSpeakers.com Facebook.com/SeismicAudio Twitter.com/SeismicAudio 1-877-347-6423 Page 2
to the presence of uninsulated dangerous
voltage inside the enclosure voltage that may
to important operating and maintenance
instructions in the accompanying literature.

SA-15T-PW Specs:
Pair of Powered 2-Way 15" PA Speaker Cabinets Mains
PA Speakers / Mains / PA Loudspeakers
50 oz Magnet and 2.5" Kapton Voice Coil
1.5" Titanium Tweeter Driver with
10 oz Magnet and 1" Throat
350 Watts RMS; 700 Watts Peak each
Two Line Input/Output - XLR Combo / Male XLR
3.5 mm Input for MP3, iPod, iPhone
Black Carpet with Black Metal Corners
MDF (Medium Density Fiberboard) , Plywood Front Panel
-Class AB Amplifier
-Power Select 110V-120V or 22V-240V Power Supply
3 Band EQ - Treble, Mid, Bass
Gain Control
Volume Control
Powered 15 Inch PA Speaker Cabinets
SeismicAudioSpeakers.com Facebook.com/SeismicAudio Twitter.com/SeismicAudio 1-877-347-6423 Page 3

SA-15T-PW Amplifier Controls:
XLR 3-Pin Female / ¼” Combo Jack Input
XLR 3-Pin Male Output
1 / 4 “ Female Line Input
1 / 8 “ Female Line Input for MP3
Use this Output jack to power a Non Powered Passive speaker similar to specs of SA-
15T-PW. If you connect an 8 ohm speaker to this jack, the built in amp on the SA-
15T-PW will change to 4 ohm and double the power output.
SeismicAudioSpeakers.com Facebook.com/SeismicAudio Twitter.com/SeismicAudio 1-877-347-6423 Page 4