SA Geyser Instruction Manual

english instruction manual

SA geyser music system

manual

Service information 3

Important safety notices 4-5

Front- and rear-panel 6

Remote control 7

System connection 8

Basic operation 9~11

Radio operation 10-11

Trouble shooting / Technical Specifications / the designer 12-13

Congratulations with your purchase!

To get the most out of your new product we

recommend that you follow our guidance

below. We recommend that you read the

manual thoroughly to get the most out of

your purchase.

We have done our outmost to make sure

that the product live up to your expectations.

Should you still need help with installation

etc. we suggest that you visit our home page

www.system-audio.com

Remember to keep the original receipt of

your purchase, in case of need for service

during the warranty period.

If you, contrary to expectations, should need

service for your new product, you shall hand

in the product to the dealer from whom you

have purchased it.

Remember to keep the original packaging if

the product shall be handed in for service.

The product is to be returned in original and

otherwise secure packaging, to avoid

damaging the product during transportation.

Important safety

notices

WARNING: IT IS IMPORTANT THAT YOU
STUDY AND OBSERVE BOTH THE
INSTRUCTIONS IN THIS MANUAL AND
THE INSTRUCTIONS ON THE DEVICE.
KEEP THIS MANUAL FOR FUTURE USE.

This device was developed and made with a
view to providing maximum safety for the
user. Incorrect use of the device may cause
electric shock or fire. The protection built
into this device will protect the user if the
procedure below is observed in connection
with installation, use and repair. This device
is fully electronic and contains no parts
which can be repaired by the user.

THE HOUSING MUST NOT BE REMOVED.
RISK OF DANGEROUS VOLTAGE. ONLY
SKILLED TECHNICIANS ARE ALLOWED
TO REPAIR THE DEVICE.

Water and moisture

Water and moistureWater and moisture

Water and moisture

The device must not be placed close to
water, such as bath tub, wash basin, kitchen
sink or wash tub, in a damp cellar or close to
a swimming pool, etc.

Cleaning

CleaningCleaning

Cleaning

Unplug the device before cleaning. Do not
use liquid detergents and aerosol cleaning
agents. Use a dry cloth.

Power cords

Power cordsPower cords

Power cords

Wiring must be organised to prevent people
from stepping on the cables and to avoid
pinching by objects placed on or beside
them. Take special care around sockets and
plug boxes and where the cable leaves the
device.

Overloading

OverloadingOverloading

Overloading

Make sure that sockets, extension flexes
and plug boxes are not overloaded as this
may lead to fire or electric shock.

Read the manual

Read the manualRead the manual

Read the manual

On unpacking the device, please read the
manual carefully and observe all instructions
given.

Power Supply

Power SupplyPower Supply

Power Supply

Only the power supply indicated on the
rating plate must be used for this device. If
you are not sure which power supply you
have, please contact the distributor or the
local electricity supplier.

Earthing or polarization

Earthing or polarizationEarthing or polarization

Earthing or polarization

If the plug cannot be inserted properly into
the socket, or if the plug does not fit, the
device must not be used in your country.

Ventilation

VentilationVentilation

Ventilation

The housing is provided with slots and
openings to ensure ventilation and reliable
operation and protect the device against
overheating. Do not block or cover these
openings. The openings must never be
blocked, for example by placing the device
on a bed, a sofa, a carpet or similar surface.

Heat

HeatHeat

Heat

Do not place the device near sources of
heating such as radiator, register, stove or
other heat-producing devices (including
amplifiers).

Important safety

notices

Damage

DamageDamage

Damage

Unplug the device and contact skilled
technicians in the following cases:

A) If power cord or plug is damaged.

B) If liquid has been spilled on the device or
objects have fallen into the device.

C) If the device has been exposed to rain or
water.

D) If the device does not work properly after
adhering to the instructions in the user
manual. Make only the setups mentioned in
the manual, as incorrect setup may cause
damage and will often make it difficult for a
skilled technician to make the device work
properly again.

E) If the device has been dropped or
damaged in any other way.

F) When the operation of the device
changes drastically, the device requires
service.

Service

ServiceService

Service

Do not attempt to carry out any service work
yourself. By opening or removing the
housing, you will be exposed to dangerous
voltage, etc. Any service work should be
carried out by skilled technicians.

Spare parts

Spare partsSpare parts

Spare parts

If spare parts are required, make sure that
the technician uses spare parts specified by
the manufacturer or with the same
characteristics as the original component.
Unauthorised spare parts may cause fire,
electric shock, etc.