Ryobi P920 User Manual

PLUG-IN LANYARD

P920

Fig. 1

The plug-in lanyard snaps into the battery compartment of
most Ryobi 18 volt portable hand-held tools and provides a
convenient method of storage and transportation, as shown
above in Figures 1 and 2.

CAUTION:

Remove any blades, bits, or other sharp objects from the
tool before attempting to store or carry with the plug-in
lanyard. Do not use the lanyard with larger tools such as
miter saws. Use the lanyard only in Ryobi brand tools.

TO INSTALL:

See Figure 3.

n Remove battery pack from tool, if necessary.

n Insert lanyard stem into tool’s battery compartment and

press until latches click.

TO REMOVE:

n Squeeze tabs on the sides of lanyard to disengage

latches.

n Remove lanyard from tool.

Fig. 2

BATTERY

COMPARTMENT

TAB

STEM

TAB

Fig. 3

983000-562
4-19-06 (REV:01)

ONE WORLD TECHNOLOGIES, INC.

1428 Pearman Dairy Road

Anderson, SC 29625

Phone [phone]

www.ryobitools.com

Always mention the
model number when
communicating with us
regarding this product.