Ryobi P910 User Manual

LARGE TOOLBOX

P910

The Ryobi large rolling toolbox is a great way to keep your
hand tools organized, accessible, neatly stored, and ready
to transport. Its large storage capacity accommodates a
wide variety of tools and accessories.

Adjustable dividers inside the toolbox allow you to customize
the storage compartments to fit your specific requirements.
Dividers can be raised and fastened into place whenever
needed, then unfastened and lowered when a larger storage
area is desired.

A cover is provided in the Velcro® pocket located on the
side of the toolbox. It can be stretched over the top to help
protect your tools from dust, debris, and moisture.

Before using the toolbox for the first time, some minor as­sembly is required.

ASSEMBLING THE TOOLBOX:

See Figures 1 - 7.

n Raise the toolbox frame’s end panels until they are stand-

ing straight up.

n Lower the fabric body over the toolbox frame. Make

sure the pull strap is positioned on the side opposite the
wheels.

FABRIC

BODY

PULL

STRAP

END PANEL

END PANEL

TOOLBOX

FRAME

Fig. 1

TOOLBOX FRAME

n Insert the toolbox handle through the vertical opening

located on the end panel of the toolbox frame.

Fig. 2

HANDLE

Fig. 3

n Thread handle through the sleeves in the center divider

section and seat in the vertical opening on the opposite
side of the frame.

SLEEVES

n Slide the ends of the pull strap through the holes on the

toolbox frame.

PULL

STRAP

END

Fig. 4

n Secure the handle to the toolbox frame using the end

caps provided. While holding the handle firmly, seat end
cap on handle end and apply pressure until it snaps into
place. Repeat with other end cap.

END CAP

Fig. 5

Fig. 6

n Secure pull strap by fastening end to snaps located on

inside of toolbox.

SNAP

PULL

STRAP END

Fig. 7

WARNING:

To prevent possible serious injury, do not sit or stand on
the toolbox.

WARNING

To avoid possible back or lifting injury, use proper lift­ing techniques and do not attempt to lift an excessive
amount.

983000-568
7-04

Always mention the model number when communicating with us regarding this product.

WARNING

If carrying a loose battery pack in toolbox, keep it away
from paper clips, coins, keys, nails, screws, or other small
metal objects that can make a connection from one ter­minal to another. Shorting the battery terminals together
may cause sparks, burns, or a fire.

RYOBI TECHNOLOGIES, INC.

1428 Pearman Dairy Road, Anderson, SC 29625

Post Office Box 1207, Anderson, SC 29622-1207

Phone [phone] • www.ryobitools.com