Ryobi P716 User Manual [en, fr, es]
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
18 VOLT XENON HI-BEAM
™
AMPOULE AU XÉNON HI-BEAM™ 18 V
HI-BEAM™ DE XENÓN 18 V
P716
ACCEPTS ALL ONE+ BATTERY PACKS
ACCEPTE TOUS LES BLOC PILES 18 V DE
ONE+
ACEPTA TODO LOS PAQUETES DE
BATERÍAS DE ONE+
Your Xenon Hi-Beam™ has been engineered and manufactured to our high standard for dependability, ease of operation,
and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
LAS BATERÍAS Y LOS CARGADORES
BATTERIES AND CHARGERS
SOLD SEPARATELY
BLOC - PILES ET CHARGEURS
VENDUS SÉPARÉMENT
SE VENDEN POR SEPARADO
Thank you for your purchase.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Cette Ampoule au xénon Hi-Beam™ sans fil a été conçue
et fabriquée conformément aux strictes normes de fiabilité,
simplicité d’emploi et sécurité d’utilisation. Correctement
entretenue, elle vous donnera des années de fonctionnement
robuste et sans problème.
AVERTISSEMENT : Pour réduire les risques de
blessures, l’utilisateur doit lire et veiller à bien comprendre le
manuel d’utilisation avant d’employer ce produit.
Merci de votre achat.
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
Su Hi-Beam™ de Xenón ha sido diseñada y fabricada
de conformidad con nuestras estrictas normas para
brindar fiabilidad, facilidad de uso y seguridad para el operador.
Con el debido cuidado, le brindará muchos años de sólido y
eficiente funcionamiento.
ADVERTENCIA: Para reducir el riesgo de lesiones,
el usuario debe leer y comprender el manual del operador antes
de usar este producto.
Le agradecemos su compra.
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS
TABLE OF CONTENTS
Introduction ..................................................................................................................................................................... 2
Warranty .......................................................................................................................................................................... 2
General Safety Rules ....................................................................................................................................................... 3
Symbols ........................................................................................................................................................................... 4
Features ........................................................................................................................................................................... 5
Assembly ......................................................................................................................................................................... 5
Operation ...................................................................................................................................................................... 6-7
Maintenance .................................................................................................................................................................... 8
Illustrations ...................................................................................................................................................................... 9
Parts Ordering/Service .....................................................................................................................................Back Page
INTRODUCTION
This product has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability
have been given top priority in the design of this product making it easy to maintain and operate.
WARRANTY
RYOBI® POWER TOOL - LIMITED THREE YEAR WARRANTY AND 90 DAY EXCHANGE POLICY
One World Technologies, Inc., warrants its RYOBI® power tools with the following conditions:
90-DAY EXCHANGE POLICY: During the first 90 days after date of purchase, you may either request service under this
warranty or you may exchange any RYOBI® power tool which does not work properly due to defective workmanship or
materials by returning the power tool to the dealer from which it was purchased. To receive a replacement power tool or requested warranty service, you must present proof of purchase and return all original equipment packaged with the original
product. The replacement power tool will be covered by the limited warranty for the balance of the two year period from
the date of the original purchase.
WHAT THIS WARRANTY COVERS: This warranty covers all defects in workmanship or materials in your RYOBI® power
tool for a period of three years from the date of purchase. With the exception of batteries, power tool accessories are warranted for ninety (90) days. Batteries are warranted for three years.
HOW TO GET SERVICE: Just return the power tool, properly packaged and postage prepaid, to an Authorized Service Center. You can obtain the location of the Service Center nearest you by contacting a service representative at
One World Technologies, Inc., P.O. Box 1207, Anderson, SC 29622-1207, by calling 1-800-525-2579 or by logging on to
www.ryobitools.com. When you request warranty service, you must also present proof of purchase documentation, which
includes the date of purchase (for example, a bill of sale). We will repair any faulty workmanship, and either repair or replace
any defective part, at our option. We will do so without any charge to you. We will complete the work in a reasonable time,
but, in any case, within ninety (90) days or less.
WHAT’S NOT COVERED: This warranty applies only to the original purchaser at retail and may not be transferred. This
warranty only covers defects arising under normal usage and does not cover any malfunction, failure or defects resulting
from misuse, abuse, neglect, alteration, modification or repairs by other than Authorized Service Centers. One World Technologies, Inc. makes no warranties, representations or promises as to the quality or performance of its power tools other
than those specifically stated in this warranty.
ADDITIONAL LIMITATIONS: Any implied warranties granted under state law, including warranties of merchantability or
fitness for a particular purpose, are limited to three years from the date of purchase. One World Technologies, Inc. is not
responsible for direct, indirect, or incidental damages, so the above limitations and exclusions may not apply to you. This
warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
2 — English
GENERAL SAFETY RULES
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS. Fail-
ure to follow all instructions listed below, may result in
electric shock, fire and/or serious personal injury.
WARNING!
When using electric appliances, basic precautions should
always be followed, including the following:
Read all the instructions before using the appliance.
To reduce the risk of injury, close supervision is
necessary when an appliance is used near children.
To reduce the risk of electrical shock, do not put
Xenon Hi-Beam™ or charger in water or other liquid.
Do not place or store appliance where it can fall or be
pulled into a tub or sink.
Use only the charger supplied by the manufacturer to
recharge.
Use only recommended battery pack. Any attempt
to use another battery pack will cause damage to your
Xenon Hi-Beam™ and could possibly explode, cause a
fire, or personal injury.
Use battery only with charger listed. For use with
18V nickel-cadmium and 18V lithium-ion battery packs,
see tool/appliance/battery pack/charger correlation
supplement 987000-432.
Do not disassemble the Xenon Hi-Beam™.
Do not place Xenon Hi-Beam™ or battery pack near
fire or heat. They may explode. Also, do not dispose of
a worn out battery pack by incinerating. Do not incinerate
the battery, even if it is severely damaged or completely
worn out. The battery may explode in fire.
Do not operate Xenon Hi-Beam™ or charger
near flammable liquids or in gaseous or explosive
atmospheres. Internal sparks may ignite fumes.
Do not store your Xenon Hi-Beam™ in a damp or
wet location. Do not store in locations where the
temperature is less than 50°F or more than 100°F. Do
not store in outside sheds or in vehicles.
Do not permit children to use Xenon Hi-Beam™. It
is not a toy. The temperature of the bulb and lens will
become hot after being on for only a short period of time.
This hot temperature can cause burn injury if touched and
can create sufficient heat to melt some fabrics.
If wrapped or in contact with fabrics, the Xenon
Hi-Beam™ lens can produce sufficient heat to melt
some fabrics. To avoid serious personal injury, never
allow the Xenon Hi-Beam™ lens to come in contact with
anything.
Keep light dry, clean, and free from oil and grease.
Always use a clean cloth when cleaning. Never use brake
fluids, gasoline, petroleum-based products, or any strong
solvent to clean the Xenon Hi-Beam™.
Don’t expose Xenon Hi-Beam™ to rain. Water entering
a power tool will increase the risk of electric shock or
malfunction.
Do not overreach. Keep proper footing and balance
at all times. Proper footing and balance enable better
control of the Xenon Hi-Beam™ in unexpected situations.
Do not use on a ladder or unstable support.
Do not leave the Xenon Hi-Beam™ unattended while
in the ON position.
XENON HI-BEAM™ USE AND CARE
This product is of household type.
Store Xenon Hi-Beam™ out of the reach of children
and other untrained persons. Xenon Hi-Beam™ s are
dangerous in the hands of untrained users.
Do not use or permit use of Xenon Hi-Beam™ in bed
or sleeping bags. This Xenon Hi-Beam™ lens can melt
fabric and a burn injury could result.
Remove battery pack from Xenon Hi-Beam™
and allow lens to cool for several minutes before
performing any routine maintenance, cleaning, or
storing Xenon Hi-Beam™ .
SAFETY RULES FOR BATTERY
XENON HI-BEAM™
Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in contact
with your skin, wash immediately with soap and water,
then neutralize with lemon juice or vinegar. If liquid gets
in your eyes, flush them with clean water for at least 10
minutes, then seek immediate medical attention.
Batteries can explode in the presence of a source
of ignition, such as a pilot light. To reduce the risk of
serious personal injury, never use any cordless product
in the presence of open flame. An exploded battery can
propel debris and chemicals. If exposed, flush with water
immediately.
Do not crush, drop or damage battery pack. Do not
use a battery pack or charger that has been dropped
or received a sharp blow. A damaged battery is subject
to explosion. Properly dispose of a dropped or damaged
battery immediately.
Risk of burns-do not touch. Risk of fire-keep away
from combustible materials.
The lens gets very hot during use. To reduce the risk of
burns, do not touch hot lens. To reduce the risk of fire, keep
away from combustible materials while in operation.
Do not shine Xenon Hi-Beam™ into the eyes.
3 — English
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING
DANGER:
WARNING:
CAUTION:
CAUTION:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
SYMBOL NAME DESIGNATION/EXPLANATION
Safety Alert Indicates a potential personal injury hazard.
Read Operator’s
Manual
Hot Surfaces
To reduce the risk of injury, user must read and understand operator’s
manual before using this product.
To reduce the risk of injury or damage, avoid contact with any hot
surface.
Wet Conditions Alert Do not expose to rain or use in damp locations.
This product uses nickel- cadmium (Ni-Cd) and lithium-ion (Li-ion)
Recycle Symbols
V Volts Voltage
min Minutes Time
Direct Current Type or a characteristic of current
n
o
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
No Load Speed Rotational speed, at no load
batteries. Local, state or federal laws may prohibit disposal of batteries
in ordinary trash. Consult your local waste authority for information
regarding available recycling and/or disposal options.
WARNING:
To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely
the Operator’s Manual. If you do not understand the warnings and instructions in the Operator’s Manual, do not use
this product. Call Customer Service for assistance.
SAVE THESE INSTRUCTIONS
4 — English
FEATURES
PRODUCT SPECIFICATIONS
Bulb ........................................ 4,300 K, 35 Watt HID Xenon
Light Output ................................................. 2,800 Lumens
Weight ..................................................................... 2.5 lbs.
KNOW YOUR XENON HI-BEAM™
See Figure 1, page 9.
The safe use of this product requires an understanding of
the information on the product and in this operator’s manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all operating features and safety rules.
ASSEMBLY
UNPACKING
This product requires tag removal.
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Xenon Hi-Beam™
Operator’s Manual
LOCK-ON BUTTON
The lock-on button is convenient for continuous use for
extended periods of time.
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create accessories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
REMOVING THE WARNING LABEL
See Figure 2, page 9.
The Xenon Hi-Beam™ has a cling-type attached warning
label on the lens. Read carefully and remove this warning
label before use.
5 — English
OPERATION
WARNING:
Do not permit children to use Xenon Hi-Beam™. It is
not a toy and the temperature of the bulb and lens will
become hot after being on for only a short period of time.
This hot temperature can cause serious burn injuries if
touched and can melt some fabrics.
WARNING:
Do not allow familiarity with products to make you careless. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING:
Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of
attachments or accessories not recommended can result
in serious personal injury.
BATTERY PROTECTION FEATURES
Ryobi lithium-ion batteries are designed with features that
protect the lithium-ion cells and maximize battery life.
TO INSTALL BATTERY PACK
See Figures 1 and 3, page 9.
Place the switch trigger in the OFF position.
Place the battery pack in the Xenon Hi-Beam™.
Make sure the latches on each side of the battery pack
snap in place and that battery pack is secured in the
Xenon Hi-Beam™ before beginning operation.
TO REMOVE BATTERY PACK
See Figures 1 and 3, page 9.
Place the switch trigger in the OFF position.
Locate latches on side of battery pack and depress both
sides to release battery pack.
Remove battery pack from the Xenon Hi-Beam™.
WARNING:
APPLICATIONS
You may use this product for the purpose listed below:
To illuminate any areas requiring additional light
To illuminate distant objects
This product will accept Ryobi One+ 18 V lithium-ion
battery packs and Ryobi One+ 18 V nickel-cadmium battery
packs.
For complete charging instructions, refer to the Operator’s
Manual for the battery packs and chargers listed in the
General Safety Rules.
WARNING:
The lens gets very hot during use. To reduce the risk of
burns, do not touch hot lens. To reduce the risk of fire,
keep away from combustible materials while in operation
.
WARNING:
Do not direct the light beam at persons or animals and
do not stare into the light beam yourself (not even from a
distance). Staring into the light beam may result in serious
injury or vision loss.
Battery tools are always in operating condition. Therefore,
switch should always be in the OFF position when not in
use or carrying at your side.
NOTE: If the light begins to flash, the battery needs to be
recharged.
THERMOSTAT PROTECTION
Self-contained thermostat will shut off unit if unit becomes
too hot. As soon as unit reaches safe operating temperature
unit can be turned on again.
Release switch trigger when unit shuts off. Unit will
cool down and thermostat will reset after about 10 mins
rest.
NOTE: If switch trigger is in lock-on position unit will take
several hours to cool. Be sure to release switch trigger
for faster cool down.
SWITCH TRIGGER
See Figure 4, page 9.
To turn the Xenon Hi-Beam™ ON, depress and hold the
switch trigger. To turn it OFF, release the switch trigger.
CAUTION:
Operate in a well ventilated area. Do not block vents.
Keep them clear to allow proper ventilation.
6 — English
OPERATION
LOCK-ON BUTTON
See Figure 4, page 9.
The Xenon Hi-Beam™ is equipped with a lock-on feature,
which is convenient for continuous use for extended periods
of time.
To lock-on:
Depress the switch trigger.
Push in and hold the lock-on button, located on the side
of the handle.
Release the switch trigger.
Release the lock-on button.
To release the lock, depress and release the switch
trigger.
WARNING:
Never leave the Xenon Hi-Beam™ in the locked-on
position and unattended. The lens becomes very hot
during use and could result in serious injury or property
damage.
7 — English
MAINTENANCE
WARNING:
When servicing, use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
WARNING:
To avoid serious personal injury, always remove the
battery pack from the product when cleaning or
performing any maintenance.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
WARNING:
Remove battery pack from Xenon Hi-Beam™ and allow
lens to cool for several minutes before performing any
routine maintenance, cleaning, or storing Xenon HiBeam™ . Failure to do so may result in serious injury
and/or property damage.
CAUTION:
The 35 Watt HID Xenon bulb cannot be replaced. Any
attempt to replace the bulb may damage the Xenon HiBeam™.
BATTERY PACK REMOVAL AND PREPARATION
FOR RECYCLING
WARNING:
Upon removal, cover the battery pack’s terminals with
heavy-duty adhesive tape. Do not attempt to destroy or
disassemble battery pack or remove any of its components. Lithium-ion and nickel-cadmium batteries must
be recycled or disposed of properly. Also, never touch
both terminals with metal objects and/or body parts as
short circuit may result. Keep away from children. Failure
to comply with these warnings could result in fire and/
or serious injury.
WARNING:
Do not at any time let brake fluids, gasoline, petroleumbased products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal
injury.
There are no user replacement parts. Repairs should
be done at an authorized service center please call
1-800-525-2579 for assistance.
NOTE: FIGURES (ILLUSTRATIONS) START ON PAGE 9 AFTER
FRENCH AND SPANISH LANGUAGE SECTIONS.
8 — English
Loading...