Ryobi CAL180G Owner's Operating Manual

DESCRIPTION

2. Depress Both Latches To Release

3. Handle

4. Press once for HIGH or twice LOW. Turn the lights off

by pressing a third time.

DESCRIPTION

4

English

Have your light repaired by a qualified person.

This tool is in accordance with the relevant safety

qualified person using original spare parts, otherwise

this may result in considerable danger to the user.

WARNING

flammable liquids or in gaseous or explosive

WARNING

Handle fl a shlight with c a r e a r ound any

flammable surface.

If bulb has been lit, let flashlight cool for several

Do not use or permit use of flashlight in bed or

sleeping bags. A burn injury could result.

■

Battery tools do not have to be plugged into an

electrical outlet; therefore, they are always in

operating condition. Be aware of possible hazards

when not using your battery tool or when changing

of electric shock, fire, or serious personal injury.

■

If under abusive conditions, liquid is ejected from

the battery, avoid contact. If this accidentally occurs,

flush with water. If liquid contacts eyes additionally,

seek medical help. This will reduce the risk of

explosion and possibly injury.

SPECIFICATIONS

WARNING

To reduce the risk of serious personal injury,

of an open flame. An exploded battery can

with water immediately.

This appliance is not intended for use by persons

or mental capabilities, or lack of experience and

or instruction concerning use of the appliance by a

the appliance.

S

■

This appliance is not intended for use by young

children or infi rm persons unless they have been

ensure that they do not play with the appliance.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING

When using battery operated tools, basic safety

these instructions before operating this product

Know your flashlight. Read user’s manual carefully.

specific potential hazards related to this flashlight.

Use only with recommended battery pack and

charger. Any attempt to use another battery pack

will cause damage to your light and could possibly

explode, cause a fire, or personal injury.

Remove battery pack from flashlight before replacing

cleaning.

Do not disassemble your flashlight.

■

Do not place flashlight or battery pack near fire

or heat. This will reduce the risk of explosion and

■

Do not dispose of a worn out battery pack by

The battery may explode in fire.

Do not store your flashlight in a damp or wet

temperature may reach or exceed 40°C (104°F). For

example, inside sheds, vehicles, or metal buildings

■

Do not permit children to use flashlight unsupervised.

time. This hot temperature may cause burn injury if

touched.

Keep work area clean. Cluttered areas and benches

Avoid dangerous environments.

Keep light dry, clean, and free from oil and grease.

Always use a clean cloth when cleaning. Never use

■

Stay alert. Watch what you are doing and use

common sense. Do not rush.

Check damaged parts. Before further use of this

checked to determine that it will operate properly

flashlight if it does not function properly.

5

English

Keep children and visitors away. Visitors should wear

safety glasses and be kept a safe distance from the

work area. Do not let visitors contact the tool or

extension cord.

SPECIFICATIONS

0.6A

Weight

0.32 kg

200 minutes --- 2.4Ah Li-ion

ABP1801G

ABP1802G

ACR1800G

ACR1800

ACC1800

RUN TIME PERFORMANCE *

type

ABP1801G

BPL-1815

BPL-1820

2.4Ah Li-ION

5+ 30+

10+ 60+

APPLICATION

To illuminate any areas requiring additional light.

■

To illuminate distant objects.

OPERATION

TO INSTALL BATTERY PACK (NOT INCLUDED)

Place battery pack in your fl ashlight. Align raised rib

on battery pack with groove inside. See Figure 1.

■

Make sure the latches on battery pack snap in place

TO REMOVE BATTERY PACK (NOT INCLUDED)

Switch off your flashlight.

■

Locate latches of battery pack and depress to

Remove battery pack from your flashlight.

features that protect the lithium-ion cells and maximise

signal the battery to shut down, and cause the tool to

stop running. To reset the battery and tool, release the

trigger and resume normal operation.

forcing the tool.

tool, the battery pack is depleted. If depleted, the battery

charger.

WARNING

English

MAINTENANCE

WARNING

When servicing, use only identical replacement

or cause product damage.

Avoid using solvents when cleaning plastic parts. Most

commercial solvents and may be damaged by their use.

WARNING

Do not at any time let brake fluids, gasoline,

come in contact with plastic parts.They contain

chemicals that can damage, weaken or destroy

damage tool as well as workpiece.

WARNING

Do not attempt to modify this tool or create

this tool. Any such alteration or modifi cation

condition leading to possible serious personal

WARNING

The bulb is not intended to be repaired or

TECHTRONIC INDUSTRIES (AUSTRALIA) PTY. LT D.

Level 1, 660 Doncaster Road,

Doncaster, Victoria 3108

Australia.

Tel: [phone] Fax No.: 1800 807 993 www.ryobi.com.au