Ryobi 2075RC User Manual

MODEL 2075RC

GAS TRIMMER

OPERATOR’S MANUAL

FOR QUESTIONS, CALL 1-800-345-8746 in U.S.

or 1-800-265-6778 in CANADA

IMPORTANT MANUAL DO NOT THROW AWAY

INTRODUCTION

TABLE OF CONTENTS

THANK YOU

Thank you for purchasing this quality product. This modern outdoor power tool is designed to provide many hours of useful service. You will find it to be a great labor-saving device.

This operator’s manual provides you with easy-tounderstand operating instructions. Read the entire manual and follow all of the instructions to keep your new outdoor power tool in top operating condition.

The other manual that came with your power tool, the parts manual, contains all of the information that you need to order parts.

PRODUCT REFERENCES, ILLUSTRATIONS AND SPECIFICATIONS

All information, illustrations and specifications in this manual are based on the latest product information available at the time of printing. We reserve the right to make changes at any time without notice.

Bump Head™ is a trademark of Ryobi Outdoor Products.

SpeedSpool®is a registered trademark of Ryobi Outdoor Products.

I. California Emission Regulations . . . . . . . . 3

II. Safety Warnings . . . . . . . . . . . . . . . . . . 3-6

A. Safety and International Symbols . . . 5-6

III. Assembly Instructions . . . . . . . . . . . . . . . 7

A. Installing the Loop Handle . . . . . . . . . 7

B. Installing the String Guard . . . . . . . . . . 7

IV. Oil and Fuel Information . . . . . . . . . . . . . 8

V. Operating Instructions . . . . . . . . . . . . 9-10

A. Starting/Stopping Instructions . . . . . . . 9

B. Adjusting Trimming Line Length . . . . . 10

C. Decorative Trimming . . . . . . . . . . . . . 10

VI. Maintenance and Repair Instructions .10-15

A. Maintenance Schedule . . . . . . . . . . . 10

B. Line Installation for the SpeedSpool . .11 C. Winding the Existing Inner Reel with

New Line . . . . . . . . . . . . . . . . . . . . . . 11

1. Releasing the Inner Reel . . . . . . . . 12

2. Cleaning the SpeedSpool . . . . . . . 12

D. Installing a Prewound Reel . . . . . . . . . 13

E. Air Filter Maintenance . . . . . . . . . . . . 13

F. Carburetor Adjustment . . . . . . . . . . . 14

G. Replacing the Spark Plug . . . . . . . . . 15

H. Cleaning and Storage . . . . . . . . . . . . 15

VII. Troubleshooting Chart . . . . . . . . . . . . . . 16

VII. Specifications . . . . . . . . . . . . . . . . . . . . 17

IX. Notes . . . . . . . . . . . . . . . . . . . . . . . . . . 18

X. Warranty . . . . . . . . . . . . . . . . . . . . . . . . 19

CONTENTS OF CARTON

This unit should consist of the following:

• Model 2075RC Assembled with SpeedSpool Head

• Loop Handle and Hardware

• Handle Bottom Clamp

• String Guard and Hardware

•4 oz. Bottle of 2-Cycle Oil

• Operator's Manual and Parts Manual

• Owner’s Registration/Warranty Card

SERVICE INFORMATION

Service on this unit both within and after the warranty period should be performed only by an authorized and approved service dealer. Dial 1-800-345-8746 in the United States and 1-800-265-6778 in Canada to obtain the listing of the authorized service dealer nearest you.

Do not return the unit to the retailer.

NOTE:

PROOF OF PURCHASE WILL BE REQUIRED FOR WARRANTY SERVICE.

THIS PRODUCT IS COVERED BY ONE OR MORE OF THE US PATENTS LISTED BELOW: 5,076,149; 4,901,682; 4,779,405; 4,651,422; 4,505,040; 4,463,498; 4,369,742; 4,342,236; 4,223,441; 2,125,688; D-249,012; D-239,329;

OTHER PATENTS PENDING.

Make sure this manual is carefully read and understood before starting or operating this equipment.

SPARK ARRESTOR

CALIFORNIA EMISSION REGULATIONS

SAFETY WARNINGS

The engine of your lawn and garden care product meets the 1995 to 1998 California emissions regulations. These units are identified by the label on the engine of your product. A typical identification label is shown. To ensure that your unit continues to meet these regulations, refer to the following information and instructions in this operator’s manual.

NOTE: For users on U.S. Forest Land and in the states of California, Maine, Oregon and Washington.

All U.S. Forest Land and the state of California (Public Resources Codes 4442 and 4443), Oregon and Washington require, by law that certain internal combustion engines operated on forest brush and/or grasscovered areas be equipped with a spark arrestor, maintained in effective working order, or the engine be constructed, equipped and maintained for the prevention of fire. Check with your state or local authorities for regulations pertaining to these requirements. Failure to follow these requirements could subject you to liability or a fine. This unit is not factory equipped with a spark arrestor. If these items are required in your area, ask your LOCAL SERVICE dealer to install the Optional Accessory Part #181696 Spark Arrestor Kit.

FOR QUESTIONS, CALL 1-800-345-8746 IN U.S. OR 1-800-265-6778 in CANADA

THE ENGINE EXHAUST FROM THIS

PRODUCT CONTAINS CHEMICALS

KNOWN TO THE STATE OF CALIFORNIA

TO CAUSE CANCER, BIRTH DEFECTS

OR OTHER REPRODUCTIVE HARM.

SAFETY ALERT SYMBOL: Indicates danger, warning, or caution. Special attention is required in order to avoid serious personal injury. May be used in conjunction with other symbols or pictographs.

WARNING: Failure to obey a safety warning can result in injury to yourself and others.

CAUTION: Failure to obey a safety warning may result in property damage or personal injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock, and personal injury.

NOTE: Advises you of information or

instructions vital to the operation or maintenance of the equipment.

THE PURPOSE OF SAFETY SYMBOLS IS TO ATTRACT YOUR ATTENTION TO POSSIBLE DANGERS. THE SAFETY SYMBOLS, AND THE EXPLANATIONS WITH THEM, DESERVE YOUR CAREFUL ATTENTION AND UNDERSTANDING. THE SAFETY WARNINGS DO NOT BY THEMSELVES ELIMINATE ANY DANGER. THE INSTRUCTIONS OR WARNINGS THEY GIVE ARE NOT SUBSTITUTES FOR PROPER ACCIDENT PREVENTION MEASURES.

SYMBOL MEANING

WARNING

California Proposition 65 Warning:

DANGER: Failure to obey a safety

warning will result in serious injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock, and personal injury.

WHILE OPERATING

•Wear safety glasses or goggles and ear/hearing protection at all times when operating this unit. Always wear a face or dust mask if the operation is dusty.

•Dress properly. Do not operate this unit when barefoot or wearing open sandals. Always wear sturdy, rubber-soled footwear. The use of gloves and long pants are recommended.

• Do not wear loose fitting clothing or articles such as scarves, strings, chains, ties, etc. because they could get drawn into the air intake. Also make sure long hair does not get drawn into the air intake. Long hair must be pulled back and secured off shoulders and neck.

• The string guard must be in place at all times while operating the unit.

• Before each use, check that the cutting head is correctly fixed, that the trigger returns automatically in neutral position, and that the cutting head remains stationary when the engine is idling.

• Before starting, adjust the handle to your size and make sure that the cutting head is not in contact with anything.

• Use the unit only in daylight or good artificial light.

• Operate this unit only in a well-ventilated area outdoors. Carbon monoxide exhaust fumes can be lethal in a confined area.

•Avoid accidental starting. Be in the starting position whenever pulling the starting rope. The operator and unit must be in a stable position while starting.

• Use the right tool. Do not use this unit for any job except for which it is intended.

• Do not overreach. Keep proper footing and balance at all times.

• Always hold the unit with both hands when operating. Keep a firm grip on both the front and rear handles or grips.

• Keep hands, face, and feet away from all moving parts. Do not attempt to touch or stop the cutting head when it is rotating.

• Do not touch the muffler or cylinder. These parts get extremely hot from operation and remain hot for a short time after the equipment is turned off.

SAFETY WARNINGS

READ ALL INSTRUCTIONS

BEFORE OPERATING

• Read the instructions carefully. Be familiar with the controls and proper use of the unit.

• Children and adolescents must not manipulate units, except for adolescents in training and under the supervision of a specialist.

• All guards and safety attachments must be installed properly before operating the unit.

• Thoroughly inspect the unit for loose or damaged parts before each use. Do not use until adjustments or repairs are made.

• Carefully inspect the areas to be cut. Remove all debris that could become entangled in the string or blade. Also remove any objects that could be thrown during cutting.

• Be aware of the risk of injury to the head, hands and feet.

SAFETY WARNINGS FOR GAS TRIMMERS

WARNING: Gasoline is highly flammable and

its vapors can explode if ignited. Take the following precautions:

1) Store fuel only in containers specifically designed and approved for the storage of such materials.

2) Always stop the engine and allow it to cool before filling the fuel tank. Never remove the cap of the fuel tank, or add fuel, when the engine is hot.

3) Pressure can build up in the fuel tank. Loosen the fuel tank cap slowly to relieve any pressure in the tank.

4) Add fuel in a clean, well-ventilated area. Wipe up any spilled fuel immediately. If fuel has been spilled, avoid creating a source of ignition or starting the engine until fuel vapors have dissipated.

5) Ensure correct fuel or fuel/oil mixture is used. Never operate the unit without the fuel cap securely in place.

6) Move the unit at least 10 feet (3 m) from the fueling point before starting the engine. Do not smoke, keep sparks and open flames away from the area while adding fuel or operating the unit.

• IMPORTANT SAFETY INFORMATION •

SAFETY WARNINGS

• Keep all bystanders, especially children and pets, at least 30 feet (9.1 m) away from the unit during operation.

• Do not operate the engine faster than the speed necessary to cut, trim or edge. Do not run the engine at high speed when not cutting.

• Always stop the engine when cutting is delayed or when walking from one cutting location to another.

• Do not operate unit without both trimming lines extended, and the proper line installed.

• Do not extend the trimming line beyond the length of the guard as specified in this manual.

• If you strike or become entangled with a foreign object, stop the engine immediately and check for damage. Repair any damage before further operation is attempted. Do not operate the unit with loose or damaged parts.

•Frequently inspect the condition of the cutting head. All damaged parts must be replaced immediately. Follow all the required precautions when undertaking replacement.

• All interventions, whether for maintenance, repair or for changing cutting head or safety attachments, must be undertaken with the engine/motor stopped.

• Use only genuine replacement parts when servicing this unit. These parts are available from your authorized dealer. The use of non-standard parts, or other accessories or attachments not designed for this unit, could result in serious injury to the user or damage to the unit and void your warranty.

• Keep unit clean of vegetation and other materials. They may become lodged between the cutting head and guard mount.

•To reduce fire hazard, replace faulty mufflers and spark arrestors, keep the engine and muffler free of grass, leaves, excessive grease or carbon buildup.

OTHER SAFETY WARNINGS

• Never store the unit, with fuel in the tank, inside a building where fumes may reach an open flame or spark.

• Allow the engine to cool before storing in an enclosure.

• Lock up and store the unit in an appropriate and dry location to prevent unauthorized use and damage.

• Keep these instructions. Refer to them frequently and use them to instruct other users. If you loan someone this unit, also loan them these instructions.

SAVE THESE INSTRUCTIONS

SAFETY AND INTERNATIONAL SYMBOLS

This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's manual for complete safety, assembly, operating and maintenance and repair information.

• READ OPERATOR'S MANUAL

Failure to follow operating instructions and safety precautions in operator's manual can result in serious injury. Read operator's manual before starting or operating this unit.

SYMBOL MEANING

• SAFETY ALERT SYMBOL

Indicates danger, warning, or caution. May be used in conjunction with other symbols or pictographs.

• WEAR EYE AND HEARING PROTECTION

WARNING: Thrown objects and loud noise can cause severe

eye injury and hearing loss. Wear eye and ear protection when operating this unit.

• FOR SERVICE INFORMATION, CALL:

USA: 1-800-345-8746 CANADA: 1-800-265-6778

• THROWN OBJECTS AND ROTATING CUTTER CAN CAUSE SEVERE INJURY

WARNING: Do not operate unit as a trimmer without string

guard in place. Keep away from rotating cutter.

• IGNITION SWITCH

ON / START / RUN

• IGNITION SWITCH

OFF or STOP

• HOT SURFACE WARNING

Do not touch a hot muffler, gear box or cylinder. You may get burned. These parts get extremely hot from operation and remain hot for a short time after the unit is turned off.

SYMBOL MEANING

• PRIMER BULB

Push primer bulb, fully and slowly, 5 to 7 times.

• KEEP BYSTANDERS AWAY

WARNING: Keep all bystanders, especially children and pets,

at least 30 feet (9.1 m) away from the trimming area.

• CHOKE CONTROL

• “START” position (A).

• “RUN” position (B).

• INDICATES OIL

Refer to operator's manual for the proper type of oil.

• UNLEADED FUEL

Always use clean, fresh unleaded fuel.

SAFETY WARNINGS

• ROTATING CUTTER CAN CAUSE SEVERE INJURY

WARNING: Stop engine/motor and disconnect lower

drive shaft from unit prior to making adjustments, removing, or cleaning.

+ 14 hidden pages