Russound XTS7 Installation Manual

XTS7

Wall-mounted Touchscreen

INSTALLATION GUIDE

OVERVIEW OVERVIEW

The Russound XTS7 is an elegant, in-wall touchscreen with a 7” display and a quad-core processor running the Android™ operating system that

WIRED OR WIFI

enables you to install and run apps from the Google Play Store. The XTS7 is pre-loaded with the Russound App, perfect for controlling your compatible Russound audio system, but the XTS7 is free to control any other smart home devices in your home such as your lights, shades, etc.

The XTS7 is 802.11 b/g/n compatible with an integrated 2.4GHz antenna. Use a Wi-Fi connection whenever a wired ethernet connection is not possible to achieve. A wired ethernet connection can utilize a single-wire connection to

a PoE switch or PoE injector, simplifying the installation while minimizing the The XTS7 comes with 16GB of storage for additional apps and there is a microSD card slot that allows expansion for up to an additional 256GB of storage.

risk of any radio interference or poor Wi-Fi reception. The XTS7 will work with

both EIA/TIA 568A and 568B wiring. When using Wi-Fi, a 12VDC@1A power

connection can be used instead of PoE. Only a single power connection is

required, either PoE or 12VDC. Inadvertently connecting both will not aect The XTS7 oers unmatched convenience in controlling your smart home. The wall-mounted design is always available for your use, meaning that you’ll

the unit as the PoE connection will not draw power if the 12VDC connection is

active. never have to search for your phone or tablet in order to start controlling devices in your home. You can keep your most important apps like those for

ENHANCED SECURITY

your lights and music on the home screen, instantly available for your use.

Because the XTS7 runs Android, you are free to use the native Android The XTS7 is also easy to install and supports both wired and wireless network connections. A PoE (Power over Ethernet) connection simplifies the wiring by allowing a single network cable to carry both the network data and the power to the touchscreen. If a Wi-Fi connection is preferred, the XTS7 also oers a

security features such as a PIN-protected screen lock. This is ideal for

commercial installations where access to the apps on your XTS7 should be

protected from wide access and only operate to designated persons with the

PIN code. 12V DC connection to supply the required power.

HIGH RESOLUTION DISPLAY

The XTS7 uses a 7” 800 x 1280 display capable of reproducing 16.7 million colors. It features projected capacitive touch technology, the latest touch technology used in smartphones and tablets, enhancing its responsiveness and performance.

ALWAYS AVAILABLE CONTROL

By mounting a touchscreen on the wall at the location of your choosing, your smart home is now instantly more accessible. It’s no longer necessary to fumble for your phone or tablet before being able to turn up the volume of your favorite music, mute the sound when you need, or adjust the lighting in

XTS7

RoHs

1

0

Wall-Mounted Touchscreen

PLEASE CHOOSE EITHER

12V DC or LAN/PoE TO

SUPPLY POWER

DO NOT USE BOTH

Power over Ethernet

(802.3af compliant)

(802.3af compliant) or 12V DC/1A

Designed in the USA by Russound/FMP, Inc. | Manufactured in China

Designed by Russound/FMP, Inc.

www.Russound.com

Manufactured in China www.russound.com

12V DC 1A

12V DC/1A

LAN/PoE

Back

12VDC Power

LAN/PoE

Note: Please choose either 12VDC Power or PoE.

DO NOT USE BOTH

Tools Needed

Philips Screwdriver (#0)

Used to ti ghten the captive l ockin g screws

the room. The XTS7 is pre-loaded with the Russound app for controlling your compatible Russound audio system, but it is also ready to install your favorite* apps from the Google Play Store.

Front

Philips Screwdriver (#2)

Used to at tach the XTS 7 mounting Bracke t to the electrical box/p-ring

2 Russound XTS7 Installation Guide Russound XTS7 Installation Guide

3

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS

STEP 

Install the electrical box or P-ring. The typical recommended mounting height for a wall-mounted touchscreen is for the center of the electrical box or p-ring to be at 59” (150cm) from the finished floor height. This may be adjusted for user preference, but the 59” height is recommended to accommodate most users. Make sure that the electrical box/P-ring is mounted level and is flush to the wall surface.

XTS7 Bracket

(Included)

US Single Gang Box

Screws

Secure each side to bracket

EU Single Gang Box

STEP 

Attach the included XTS7 mounting plate to the electrical box or P-ring using

the supplied screws. Please note the orientation below. The XTS7 can only

be installed in landscape orientation. The plate should be installed so that the

two attachment prongs at either end are facing into the room. These prongs

will be used for attaching the XTS7 to the mounting plate.

For a 1-gang US box or P-ring, two mounting screws will be used, one at the

top and one at the bottom, centered horizontally on the mounting bracket.

For a 2-gang US box or P-ring, four mounting screws will be used, as shown

below.

For a 60mm Euro box, two mounting screws will be used, with the two

horizontal screwholes being recommended.

STEP 

Connect the PoE Ethernet cable or the 12VDC power cable from the electrical

box or P-ring to the rear of the XTS7. Before attaching the XTS7 to the wall,

make sure that touchscreen powers up properly. The Russound logo will

appear during bootup and if this is a new installation, the touchscreen will

enter the standard Android setup process. This can be completed once the

touchscreen is fully mounted.

STEP 

Secure each

Wireless Installation Note: If a Wi-Fi connection is desired, make sure to test the Wi-Fi signal strength at the proposed mounting location prior to cutting any wall openings. The Wi-Fi signal strength can be checked using any of the commonly available Wi-Fi signal strength apps. If the Wi-Fi signal is not strong enough at the proposed mounting location, consider using a wired ethernet connection or enhancing the Wi-Fi in the mounting area.

Wired Network Installation Note: If a wired network connection is being used, keep in mind that the X TS7 uses a dynamic DHCP network address supplied by your router. When a more permanent IP address is required, a DHCP-reservation may be used on a compatible router.

XTS7 Bracket

(Included)

Screws

side to bracket

Attach the touchscreen to the mounting bracket by aligning the mounting

brackets prongs to the corresponding slots on the rear of the XTS7. Use a #0

Phillips screwdriver to tighten the two locking screws on the rear sides of the

XTS7 until the touchscreen is tightly mounted to the bracket.

STEP 

Device Setup

When powered up for the first time, the XTS7 will enter setup mode. If using

a wired network connection, the XTS7 should already be connected to the

internet and will proceed to the next step. If using a Wi-Fi connection follow

the on-screen prompts to connect your XTS7 to the desired Wi-Fi

4 Russound XTS7 Installation Guide Russound XTS7 Installation Guide

5

SYSTEM SETUP SYSTEM SETUP

COPY APPS & DATA

The setup process will ask if you want to copy apps and data from an existing account. We recommend using the option “Don’t copy”. This is for several reasons. First, phones or tablets typically have much more storage space than a wall-mounted touchscreen requires and you can exceed the amount of storage when attempting to copy all existing apps and data. Second, and most importantly, the key advantage of the XTS7 is having a simplified control interface with only a small number of apps that are used to control your smart home. Keeping the number of apps installed to a minimum means that the apps that you want to use are always easily accessible from the home screen. For these reasons, we recommend selecting “Don’t Copy”.

SIGN IN

The setup process will now show a sign-in screen to sign into your Google account. If you are the homeowner, feel free to sign in with your Google account credentials or to create a new Google account. If you are NOT the homeowner, select “Skip” so that the homeowner can complete this step later. For smarthome control, especially if using Google Assistant, it is important that the account logged into Google be the same account that is associated with all of the smarthome devices.

RESTORE DATA FROM AN OLD DEVICE

SET SCREEN LOCK

On this screen, you can select a PIN code (minimum of 4 digits) to use to

control access to your XTS7. If you do not wish to use a PIN code, simply

select “Skip”. Keep in mind that anyone who has access to the XTS7 can

enter the settings menu and create a PIN in the future. If you would like to

prevent this from happening, set a secure PIN.

ANYTHING ELSE?

On this screen, you can choose to change the default font size as well as

select a dierent wallpaper for your new XTS7. These can also be changed at

any time in the future through the Android settings menu. Feel free to change

them now, or select “No thanks” to continue.

Setup of your XTS7 is now complete.

The XTS7 has the Russound app pre-installed. You can navigate to the

Google Play Store to download and install your favorite* apps to your XTS7

now.

As mentioned previously, the functions of your XTS7 touchscreen are quite dierent from your smartphone or tablet. We recommend selecting “Don’t restore” so that unneeded data is not transferred to your XTS7 wall-mounted touchscreen.

GOOGLE SERVICES

You may be asked if you would like to back up your XTS7 to your Google Drive account. This can simplify recovery or setting up additional XTS7 touchscreens in your home. We recommend backing up your XTS7 to your Google Drive account.

6 Russound XTS7 Installation Guide Russound XTS7 Installation Guide

7

PRODUCT SPECIFICATIONS WARRANTY

SPECIFICATIONS

Processor Quad-core 64-bit Cortex™ A53

RAM 2GB

Touchscreen Display 7" TF T

Display Resolution 800 x 1280 (16.7M Colors)

Screen Brightness 400 nits

Storage Capacity

Network Connectivity Wired or Wi-Fi (802.11 b/g/n - 2.4GHz)

Physical Connections MicroSD Slot for Storage Expansion

Power Requirements (Power Supply Not Included)

Mounted Dimensions (LxHxD)

Depth behind wall .75" (1.9 cm)

Weight 1.2 lbs (0.55 kg)

16GB w/11.4 GB Free, Expandable via MicroSD

PoE (802.3af) or 12VDC @1A

6.91" x 4.53" x 0.65" (17.6 cm x 11.5 cm x 1.65 cm)

LIMITED WARRANTY

The Russound XTS7 is guaranteed for one (1) year from the date of

purchase against all defects in materials and workmanship. During this

period Russound will replace any defective parts and correct any defect

in workmanship without charge for either parts or labor. For this warranty

to apply, the unit must be installed and used according to its written

instructions. If service is necessary, it must be performed by Russound.

Russound assumes no responsibility for defects resulting from abuse or

servicing performed by an agency or person not specifically authorized in

writing by Russound. Damage

to or destruction of components due to improper use voids the warranty.

In these cases, the repair will be made at the owner’s expense. Accidental

damage and shipping damage are not considered defects under the terms

of the warranty. To return for repairs, the unit must be shipped to a repair

facility designated by Russound at the owner’s expense, along with a Return

Authorization number and documentation explaining the nature of the

service required. Any product returned without prior written permission will

be returned to sender. Russound sells products only through authorized

Dealers and Distributors to ensure that customers obtain proper support and

service. Any Russound product purchased from an unauthorized dealer or

other source, including retailers, mail order sellers and online sellers will not

be honored or serviced under existing Russound warranty policy. Any sale

of products by an unauthorized source or other manner not authorized by

Russound shall void the warranty on the applicable product.

* The XTS7 is designed to run apps designed for smart home control and not for apps such as resource-intensive games. All installed apps must be able to run in Landscape Orientation.

RUSSOUND

200 International Drive, Suite 155

Portsmouth, NH 03801 USA

Tel 603.659.5170

WARRANTY ADDRESS

Russound

Attn: RA# (Insert your RA number here)

1955 Wehrle Dr

Williamsville NY 14221

www.russound.com

e-mail: tech@russound.com

8 Russound XTS7 Installation Guide Russound XTS7 Installation Guide

9

NOTES NOTES

________________________________________________________________

10 Russound XTS7 Installation Guide Russound XTS7 Installation Guide

________________________________________________________________

11

All trademarks are the proper ty of their respective owners.

Specifications are subject to change without notice 07.10.22 REV1.

Russound XTS7 Installation Manual

Specifications and Main Features

Frequently Asked Questions

User Manual