Russound SPEAKER ROUGH-IN User Manual

SB-2.5 Rough-In Bracket

Rectangular Rough-In Bracket for SP550.2
speakers. One pair per box.

SB-1.6 Rough-In Bracket

Circular Rough-In Bracket for SP632.1 speak­ers. One pair per box.

SB-2.6 Rough-In Bracket

Rectangular Rough-In Bracket for SP650.1
speakers. One pair per box.

SB-1.5 Rough-In Bracket

Circular Rough-In Bracket for SP523.1, SP503.1
and SP522.1 speakers. One pair per box.

SB-3.6 Rough-In Bracket

Square Rough-In Bracket for SP652.1 and SP622.1
speakers. One pair per box.

Speaker Rough-In Kit

Instruction Manual

5 Forbes Rd. Newmarket, NH 03857

☎ 603.659.5170 • Fax [phone]

Fax-On-Demand: 603.659.5590

e-mail: [e-mail]

Come visit us at:

INSTALLATION

1.Prepare the speaker bracket by snapping the
wings to each side of the speaker bracket rough-in
kit as shown in fig 1.

2.

Locate the stud opening that best suits the speaker
application and attach each side of the wings to
the stud. It is important to think about speaker
depth, electrical components, HVAC and other
obstacles that may prohibit proper installation.
A minimum depth of 3.25” is needed in most
applications (see fig 2).

3.

Pull the necessary wire to each of the brackets.
Each wing has a wire loop for securing during the
construction process (see fig 3). It is important to
use these loops so that the wire does not get lost
in the wall or ceiling.

4.

Inform the drywall installer as to the nature of the
bracket and the use of the brac ket. Information
and communication is the key to a successful
installation.

2 pcs.

4 pcs.

fig 3

fig 2

OVERVIEW

The speaker rough-in kit offers installers a firm
template and speaker locator for dryw all installers.
Made of ABS plastic, the brac ket can withstand the
abuse during the construction process. Each kit con­sists of two (2) speaker brackets and four (4) snap on
wings for affixing to each side of the stud opening.

fig 1

A/V DISTRIBUTION & CONTROL SYSTEMS