Russound HOME THEATER PLATES User Manual

Data Sheet

HOME THEATER PLATES

HTP-1, HTP-2

As part of Russound’s PlateMate®line of wall plate

solutions, the HTP-1 and HTP-2 Home Theater Plates

provide easy in-wall hookup of all the speakers in a

multichannel surround sound system.

The HTP-1 accommodates 5.1 and 6.1 surround

sound configurations. It provides dual binding posts

for six speakers and line-level RCA connectors for

two powered subwoofers.

For 5.1, 6.1, and 7.1 configurations, the HTP-2 pro-

vides dual binding posts for up to seven speakers

along with line-level RCA connectors for two pow-

ered subwoofers.

Both models use a heavy-duty molded plate that

supports the weight of high-quality interconnect

cables. All connectors are gold-plated brass for

maximum conductivity and corrosion resistance.

Each connector is clearly labeled.

Binding posts with hex nuts allow for convenient

and secure connections, and the captive posts don’t

turn while the nuts are being tightened. The 5-way

binding posts accept pins, spade lugs, single or

double banana plugs, and bare or tinned wire up to

12 gauge. RCA connectors for powered subwoofers

have F connectors on the back of the plate for

increased reliability.

Each Home Theater Plate will fit a standard double-

gang wall box or plaster ring. Both models come

with a white finish.

HTP-1 HTP-2

Specifications

Accessories

Limited Warranty

Since 1967, innovation, quality and reliability have been the core of the Russound product tradition. Today, Russound offers everything for enjoying multiroom audio-video in your home. All distributed audio-video solutions are built to high standards and designed with the unique consideration of making products that are a pleasure to live with and enjoy.

5 Forbes Road, Newmarket, New Hampshire 03857 603.659.5170 www.russound.com

©2005 Russound. All rights reserved. All trademarks are the property of their respective owners. Specifications are subject to change without notice. Russound is not responsible for typographical errors or omissions. 08/05

HTP-1

Binding posts: (12) Russound PM-BP 5-way captive,

7/16” (11 mm) hex head, gold-plated brass

Max. wire size: 12 AWG

RCA connectors: (2) Russound PM-RCAF, gold-plated brass

Plate: Standard double gang (U.S. style)

Finish: White

Dimensions: 4.84” W x 4.84” H x 1.1” D

(12.3 x 12.3 x 2.8 cm)

Weight: 8.5 oz (241 g)

HTP-2

Binding posts: (14) Russound PM-BP 5-way captive,

7/16” (11 mm) hex head, gold-plated brass

Max. wire size: 12 AWG

RCA connectors: (2) Russound PM-RCAF, gold-plated brass

Plate: Standard double gang (U.S. style)

Finish: White

Dimensions: 4.84” W x 4.84” H x 1.26” D

(12.3 x 12.3 x 3.2 cm)

Weight: 10.5 oz (298 g)

S2-32-W Double-gang plastic wall box with Auto Clamps

AW162CL3 2-conductor, 16-gauge unshielded speaker cable

AW164CL3 4-conductor, 16-gauge unshielded speaker cable

PM-DB Premium gold-plated dual banana plug, box of 6

PM-SB Premium gold-plated single banana plug, box of 12

The Russound HTP-1 and HTP-2 are fully guaranteed for ten (10) years from the date of purchase against all defects in materials and workmanship. For this warranty to apply, the unit must be installed and used according to its written instructions. During this period, Russound will replace any defective parts and correct any defect in workmanship without charge for either parts or labor. Accidental damage and shipping damage are not considered defects under the terms of this warranty. Russound assumes no responsibility for defects resulting from abuse or servicing performed by an agency or person not specifically authorized in writing by Russound. If service is necessary, it must be performed by Russound. Damage to or destruction of components due to excessive power voids the warranty. In these cases, the repair will be made at the owner’s expense. To return for repairs, the unit must be shipped to Russound at the owner’s expense, along with a note explaining the nature of the service required. Be sure to pack in a corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit.

Before returning a unit for repair, call Russound at (603) 659-5170 for a Return Authorization number. Write the RA number on the shipping label and ship to: Russound, 5 Forbes Road, Newmarket NH 03857.

Russound sells product only through authorized Dealers and Distributors to ensure that customers obtain proper support and service. Any Russound product purchased from an unauthorized dealer or other source, including retailers, mail order sellers and online sellers will not be honored or serviced under existing Russound warranty policy. Any sale of products by an unauthorized source or other manner not authorized by Russound shall void the warranty on the applicable product.