Russell Hobbs RHWM612B-M, RHWM612-M Instruction Manual

Model number:

RHWM612B-M/RHWM612-M

For Customer Services & Spare Parts please call 0845 208 8750

Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm

or visit us at www.productcareuk.com

6KG 1200 Spin Speed Washing Machine

Instruction Manual

Before using your appliance, please read
this manual carefully and keep it for future
reference.

For Customer Services & Spare Parts please call 0845 208 8750

Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm

or visit us at www.productcareuk.com

Contents

Safety Instructions …………………………………………………… 3 - 4

Before using the appliance …………………………………………………… 5 - 6

Installation …………………………………………………… 7 - 11

How to use …………………………………………………… 12 - 14

Control panel & functions …………………………………………………… 15 - 16

First wash …………………………………………………… 17

Program table …………………………………………………… 18

Program selection …………………………………………………… 19

Error codes …………………………………………………… 20

Trouble shooting …………………………………………………… 21 - 22

Maintenance …………………………………………………… 23 - 26

Removing stains …………………………………………………… 27

Specification

…………………………………………………… 28

Connection to the mains supply

…………………………………………………… 29

Spare parts …………………………………………………… 30

Warranty …………………………………………………… 31

Product fiche …………………………………………………… 32

Notes

…………………………………………………… 33 – 35

For Customer Services & Spare Parts please call 0845 208 8750

Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm

or visit us at www.productcareuk.com

3

Safety instructions

Important note:

Please read this booklet before installing and switching on this appliance. The
manufacturer assumes no responsibility for incorrect installation and usage as
described in this booklet.

• This appliance can be used by children aged from 8 years and above

and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the
appliance.

• Do not use an extension lead for this appliance. Only plug directly into a wall

socket.

• Do not plug in damaged plug sockets.

• In case the power cable becomes damaged, contact 0845 208 8750 for advice.

• Never pull the cable when unplugging – always grip the plug itself.

• Do not plug-in or pull-out the plug from the receptacle with wet hands

to prevent electric shock.

• Never touch the machine with wet hands or feet.

• Never open the detergent drawer when the appliance is running.

• Never force the door to open when the washing machine is running.

• Do not touch discharging hose and water during discharging as the appliance

may reach high temperatures when running.

• In case of any breakdown, unplug the appliance first and then turn the tap

off. Do not attempt to repair by yourself, always contact 0845 208 8750 for
advice.

• Remember that packaging materials of your machine may be dangerous for

children.
Keep the packaging materials in a place where children cannot reach or dispose
of them appropriately.

• Do not allow your children to play with the washing machine as it is an

electrically- driven appliance.

• Keep your pets away from your machine.

For Customer Services & Spare Parts please call 0845 208 8750

Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm

or visit us at www.productcareuk.com

4

Safety instructions

• Your machine should only be used by adults in line with the information

provided in this user’s manual.

• Your machine is designed to be used domestically. Commercial use

will cause your warranty to be cancelled.

• Any interference with the appliance, except when carried out by a

qualified engineer, will render your warranty invalid.

• Ideal operating temperature of your machine is 15-25˚C.

• Do not place your machine on carpet as this will block ventilation of the

base.

• Do not keep inflammable liquids near your machine.

• You should remove the transport bolts of your machine before the

first usage. Faults occurring in machines operated with transport
bolts fitted are not covered by the warranty.

• Do not put the discharging hose of your machine in a bucket or sink.

• Your machine is not covered under warranty for faults caused by any kind

of external factors (pesticides, fire, etc.).

To avoid fire, electrical shock and other accidents, please remember
the following:
To ensure your safety, an earthed power supply should be used.

• Only the voltage indicated in power label can be used. If you are not

clear of the voltage at home, please contact your electricity supplier.

• When you are using the heating function, the maximum current through

the washing machine will reach 10A. Therefore, please make sure the
power supply units (current, voltage and cable) can meet the normal load
requirements for the machine.

For Customer Services & Spare Parts please call 0845 208 8750

Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm

or visit us at www.productcareuk.com

5

• Transportation screws which are located at the back of the machine,

must be removed before using or running the machine. You will void the
manufacturer’s guarantee if these are not removed before using or
running the machine

• Before installation, check that all parts listed below are present. If

any parts are missing, please contact the product care service
team on 0845 208 8750.

Before using your appliance

Note

The drawings in the book may vary from your washer model. They are
designed to show the different features of all models covered by this
book. You r model may not include all features.

The Front of the machine

For Customer Services & Spare Parts please call 0845 208 8750

Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm

or visit us at www.productcareuk.com

6

Before using your appliance

Water inlet valve

Transport bolts

Outlet hose

Power cable

The Back of the machine

For Customer Services & Spare Parts please call 0845 208 8750

Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm

or visit us at www.productcareuk.com

7

Installation

1. Before operating the washing machine, remove the 4 transportation screws
and rubber spacers from the back of the machine. If the screws are not removed,
it may cause heavy vibration, noise and product malfunction (voiding the
guarantee).

2. Unscrew the 4 screws with a wrench, spanner or cross-tip screwdriver. Keep the
4 Screws as they will need to be re-used if the machine has to be transported.

3. Close the holes with the cap holders supplied.

For Customer Services & Spare Parts please call 0845 208 8750

Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm

or visit us at www.productcareuk.com

8

Installation

4. Adjust the level of washing machine by the adjustable feet. Please check if there is a gap
between the four adjustable feet and the floor. If there is then adjust the level of the
washing machine by turning the adjustable feet. Make sure that the machine does not
sway and that it is completely level. After the adjustment is finished, turn the fixing nuts
up tightly, so that the adjustment that has been made is fixed.

NOTE

The machine should not sway and all the adjustable feet should sit/touch the floor.

Location of the Washing Machine

• Check location where the washer will be installed. Make sure you have everything

necessary for correct installation.

• Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing.

• Do not place or store laundry products on top of washer at any times.

• Install the washer on a horizontal solid floor, flat, non-slippery and tough floor. Do not

install onto a carpet.

• If the washer is installed on an unsuitable floor, it could make considerable noise, vibrate

severely and cause a malfunction. If the washer is not level, adjust the leg up or down for
horizontal installation.

• Never put cardboard, wood or other materials under your machine to try and stabilise

the unit.

• Ventilation openings must not be obstructed.

• Leave a space (right & left : 2cm, rear : 10cm).

• In case of built-in installation, the distance

between top of the washer and bottom of
upper plate should be at least 3mm.

For Customer Services & Spare Parts please call 0845 208 8750

Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm

or visit us at www.productcareuk.com

9

Installation

Electrical connection

• Your washing machine is set to 220-240V and 50Hz.

• The mains cord of your washing machine is equipped with a specific

earthed plug. This plug should always be inserted to a earthed socket of 13
amps. The current value of the fuse should be 13 amps.

• We do not take responsibility for any damage that occurs due to non

earthed usage.

• Operating your machine under low voltage will cause the life cycle of

your machine to be reduced and its performance to be restricted.

Water
The washer should be connected to the cold water mains using new hose
sets. Old hose sets should not be reused. In using only one water tap or in
case of only one water inlet valve, connect the inlet hose to the cold water
inlet valve.

Water inlet hose connection

• Be careful not to confuse hot water inlet and cold water inlet.

• Your machine has a single water (cold) inlet.

• To prevent leakages on the connection joints, 1 seal is included in the hose

packing, (Fit this seal on the end of the water inlet hose at the tap side.)

• After all connections are completed, check for leakages around the

connection joints by turning on your tap completely and seeing if any
water escapes.

• Be sure that the water inlet hoses are not folded, twisted, crushed or

elongated by stretching.

For Customer Services & Spare Parts please call 0845 208 8750

Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm

or visit us at www.productcareuk.com

10

Installation

Ordinary tap (not included)

Screw-shaped tap (not included)

For Customer Services & Spare Parts please call 0845 208 8750

Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm

or visit us at www.productcareuk.com

11

Installation

Water drainage

• The water outlet hose should be mounted at a height of minimum 60 cm,

maximum 100 cm from the ground.

• The end of the water outlet hose can be fitted directly to the drainage

hole on the back side of the washer.

• When installing the outlet hose, secure it with a string or tie extensions

(not included).

• Never attempt to extend the water outlet hose by adding extra parts.

• If the outlet hose is too long, do not force it back into the washer.

This will cause abnormal noise and damage to the product.